ARRIVALS

NEW ARRIVALS

Arduino Boards , Sensors , Modules , Integrated Circuits (ICs)

3.3V/5V MB102 Breadboard Power Supply Module

50,00 EGP
Add to cart

Breadboard power supply module, compatible with 5V, 3.3V.
Apply to MB102 breadboard
Input voltage: 6.5-12 V (DC) or USB power supply
Output voltage: 3.3V/5V can switch over
Maximum output current: <700 ma
Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V
On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.

36mm Ultrasonic Mist Maker Module (24V DC)

550,00 EGP
Add to cart
  • Cool Atomization: Uses 1.7 MHz vibrations to create fine mist without heat, preserving essential oils.
  • Efficient Performance: Delivers $ge$ 300 mL/hour of mist while consuming only 15W–20W.
  • Compact & Durable: 36mm diameter design with corrosion-resistant components for easy integration.
  • Safety Integrated: Built-in sensor automatically shuts the unit off if water levels drop too low.
  • Low-Voltage Operation: Operates safely on 24V DC power, ideal for DIY and decorative projects.

4×4 Matrix Keypad

35,00 EGP
Add to cart
  1. Ultra-thin design & adhesive backing provides easy integration to any project
  2. Excellent price-performance ratio
  3. Easy communication with any microcontroller
  4. 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
  5. Sticker can peel off for adhesive mounting.
  6. Operating Voltage (V): 12 DC

7400 Quad 2-input NAND Gate

14,00 EGP
Add to cart
  • Contains four independent 2-input NAND gates
  • Operates at standard 5V TTL logic levels
  • Performs NAND logic on two inputs per gate
  • Fast switching with low propagation delay
  • Available in 14-pin DIP or SMD packages

AS608 Optical Fingerprint Sensor Module

Original price was: 900,00 EGP.Current price is: 850,00 EGP.
Add to cart
  1. Resolution: 500dpi
  2. Supply current: <60mA
  3. Supply voltage: 3.3V
  4. Fingerprint image entry time: <1.0 seconds
  5. Peak current: <60mA

ATGM336H Dual-Mode GNSS GPS Module – High Sensitivity, Fast Fix, NEO-M8N Compatible

800,00 EGP
Add to cart
  • Dual-Mode GNSS (GPS + BeiDou)
  • High positioning accuracy
  • Fast satellite lock (Quick TTFF)
  • High sensitivity receiver
  • NEO-M8N compatible
  • Low power consumption
  • UART interface with NMEA output
  • Compact and lightweight design

DC 3V 70mA 12000 RPM Vibration Motors

20,00 EGP
Add to cart
  • ⚡ Low power operation at 3V DC
  • 🔋 Efficient current draw: only 70mA
  • 🚀 High-speed rotation: 12000 RPM
  • 📦 Compact and lightweight design
  • 📳 Strong vibration output for haptic feedback
  • 🔧 Coreless motor with eccentric weight
  • 🧩 Easy to integrate into small devices
  • 💪 Durable for continuous use in portable electronics

DC 5V to DC 12V USB Voltage Step-Up Converter Cable with DC Jack 5.5 x 2.1mm

75,00 EGP
Add to cart
  1. Voltage : Input through (USB) DC 5V
  2. Output via (DC Round Pin) : DC 12V
  3. Color: BLACK
  4. Input / Output Current: Maximum Input 0.6
  5. Easier for installation save time and money
  6. Easy to use.

Dc Gear Motor With Magnetic Linear Encoder jGA25-370 (170RPM-6V)

550,00 EGP
Add to cart

The JGA25-370 (6V, 170RPM) is a premium, all-metal DC gear motor equipped with a rear-mounted magnetic quadrature encoder. Delivering reliable torque and precise rotational feedback, it is the ideal choice for closed-loop control systems, robotics odometry, smart cars, and precision automation projects.

DS18B20 Temperature Sensor

45,00 EGP
Add to cart
  • Digital temperature sensor with 1-wire interface
  • Measures temperatures from –55°C to +125°C
  • High accuracy ±0.5°C over a wide range
  • Requires only one data line for communication
  • Can connect multiple sensors on a single bus
  • Waterproof versions available for outdoor use
  • Compatible with Arduino, Raspberry Pi, and other microcontrollers

Dual-Speed Encoder with Pulse Output

250,00 EGP
Add to cart
  1. Working voltage: 4.5V to 5.5 V
  2. Transmit tube pressure drop: Vf = 1.6 V
  3. Transmit tube current: 20 mA
  4. Distinguish precision: 0.01 mm
  5. Measurement frequency, 100 kHz

Ethernet Module (ENC28J60) For Arduino / Microcontroller

500,00 EGP
Add to cart

Gripper – Robot Mechanical Arm Aluminum Metal Claws

Original price was: 370,00 EGP.Current price is: 350,00 EGP.
Add to cart
  1. The degree of Freedom (DOF): 2
  2. Paw material: aluminum alloy
  3. Paw weight: about 68g (without motor)
  4. Claws overall length: 108mm (overall maximum length when closed paw)
  5. Claws overall width: 98mm (maximum overall width of the paw when open)
  6. Paw maximum opening angle: 55mm

INA226 Bi-Directional Current/Power Monitoring Sensor Module For Arduino (CJMCU-226) I2C Interface

156,00 EGP
Add to cart

L298N Motor Driver Module – 2A Dual Channel

Original price was: 95,00 EGP.Current price is: 90,00 EGP.
Add to cart
  1. Logical voltage: 5V
  2. Drive voltage: 5V-35V
  3. Logical current: 0-36mA
  4. Drive current: 2A (max. single bridge)
  5. Max power: 25W
  6. Dimensions: 44 x 44 x 28 (LxWxH)mm
  7. Weight: 26 gm

LM35DZ Temperature Sensor Chinese

75,00 EGP
Add to cart
  1. 🎯 Calibrated in Celsius (°C)
  2. 📏 10.0 mV/°C linear output
  3. ✅ ±0.5°C accuracy at 25°C
  4. 🔋 Operating voltage: 4V–30V
  5. 🔌 Ultra-low current: <60 µA
  6. 🔥 Low self-heating: 0.08°C
  7. 🧪 Minimal non-linearity: 0.25°C
  8. 📤 Low output impedance: 0.1Ω

MG996R 360° Continuous Rotation Servo Motor – 11 kg·cm High Torque, Metal Gears

230,00 EGP
Add to cart
  1. Weight: 55g
  2. Dimension: 40.7×19.7×42.9mm
  3. Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
  4. Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
  5. Operating voltage: 4.8 ~ 6.6V
  6. Gear Type: Metal gear
  7. Dead band width: 1us
  8. Wire length: 32cm

Micro Servo SG90 – 0 to 180 Degrees, 1.8 kg.cm, Plastic Gears

95,00 EGP
Add to cart
  1. Model: SG90
  2. Weight: 9 gm
  3. Operating voltage: 3.0V~ 7.2V
  4. Servo Plug: JR
  5. Stall torque @4.8V : 1.2kg-cm
  6. Stall torque @6.6V : 1.6kg-cm

OLED LCD 0.91 INCH 128X32 I2C

150,00 EGP
Add to cart

Short Description

The 0.91-inch OLED (128x32) is a compact, high-contrast monochrome display module widely used in DIY electronics projects. It communicates via the I2C interface, requiring only two data wires, making it perfect for microcontrollers like Arduino, ESP32, or Raspberry Pi.

PCB LINE IC FR2 (9×7 cm2)

28,00 EGP
Add to cart

PICkit3 Debugger Programmer Emulator Controller Development Board

2.200,00 EGP
Add to cart
  1. Full-speed USB support using Windows standard drivers
  2. Real-time execution
  3. Processors run at maximum speeds
  4. Built-in over-voltage/short circuit monitor
  5. Low voltage to 5V (1.8 to the 5V range)
  6. Read/write program and data memory of the microcontroller
  7. Program up to 512K byte flash.