Electronic Modules
1.3 Inch I2C IIC 4 pin OLED Display Module
Original price was: 320,00 EGP.230,00 EGPCurrent price is: 230,00 EGP.-
1.3″ OLED screen with 128×64 resolution
-
I2C interface – requires only 2 data pins (SDA, SCL)
-
White or blue pixels on black background (batch-dependent)
-
Ultra-low power consumption for energy-efficient projects
-
Wide viewing angles and high contrast display
-
Based on SSD1306 controller – compatible with U8g2 and Adafruit libraries
-
3.3V to 5V operating voltage – works with most microcontrollers
-
Compact design with mounting holes for easy installation
1000KV Step Up Power Module High-voltage Generator
300,00 EGP✔ High-Voltage Output (Up to 1000KV) – Ideal for experiments & demonstrations.
✔ Low Input Voltage (3.3V-5V) – Works with standard Li-ion batteries.
✔ Tesla Coil Technology – Efficient and powerful voltage transformation.
✔ Compact & Easy to Use – Small size for seamless integration.
✔ High-Quality Silicone Wires – Ensures durability and safety.
12V 1.3W Mini Solar Panel Polycrystalline DIY Charging Module
350,00 EGP-
Compact and lightweight design
-
High-efficiency polycrystalline cells
-
Ideal for DIY and educational projects
-
Pre-attached wires for easy connection
-
Suitable for battery charging and small devices
-
Eco-friendly and renewable energy source
-
Durable and weather-resistant panel design
12V Peltier TEC1-12705 Cooler Module
220,00 EGP- Model number: TEC1-12705
- Operating Voltage: 12V
- Maximum Voltage- Umax (V) : 15V
- Maximum Current- Imax (A) : 5.2A
- Maximum Power : 54 W
- Power Cord: 25cm
12V Peltier TEC1-12706 Cooler Module
150,00 EGP- Model number: TEC1-12706
- Operating Voltage: 12V
- Maximum Voltage Umax (V) : 15.4V
- Maximum Current Imax (A) : 6A
- Maximum Power: 92 W
- Maximum Temperature: 138°C
- Power Cord: 200mm
4×4 Matrix 16 Keyboard Keypad
Original price was: 150,00 EGP.130,00 EGPCurrent price is: 130,00 EGP.- Easy communication with any microcontroller.
- Tactile type switches.
- Over 1,000,000 operations per key.
- Contact rated for 12V dc @ 20mA.
- Over 1,000,000 operations per key.
4×4 Matrix Keypad
35,00 EGP- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 12 DC
5V 1 Channel Relay Active low
40,00 EGP- The module using Songle relay control.
- AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
- Power indicator (green), relay status indicator light (red).
5V 2 Channel Relay Module
55,00 EGP- The module using Songle relay control.
- AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
- Power indicator (green), Two ways of relay status indicator light (red).
- Using 8550 transistor-driven, strong driving ability.
- Has the fixed bolt hole and easy installation.
82D05 5V Digital Power Channel Amplifier Bluetooth Speaker Module
50,00 EGP-
5V Power Supply for USB or battery-powered projects
-
Built-in Bluetooth Receiver for wireless audio streaming
-
Stereo Output with left and right channel terminals
-
Compact Size ideal for DIY speakers and audio projects
-
Low Power Consumption with efficient digital amplification
AMS1117 3.3V Voltage Regulator Power Module – 800mA Output for Arduino & Microcontrollers
20,00 EGP-
Regulated 3.3 V Output ideal for powering sensors and microcontrollers
-
800 mA Maximum Current suitable for moderate-load electronics
-
Onboard Capacitors for stable voltage with minimal ripple
-
Compact PCB Module easy to integrate into DIY circuits
-
Standard Input Range supports up to ~12 V input voltage
Battery Kit Breadboard (9V Input – Output 5V)
35,00 EGP- 9V input with regulated 5V output
- Breadboard-compatible design
- Plug-and-play for fast prototyping
- Ideal for Arduino, sensors, and logic circuits
- Includes 9V battery clip
Bluetooth Audio Receiver Board Module (VHM-314) (Type C)
100,00 EGP- Bluetooth 5.0: Stable, fast wireless audio streaming
- Type-C Power Input: Easy 5V supply via USB-C or battery
- High-Quality Audio: Low noise, clear stereo sound
- 3.5mm Output Jack: Connects directly to speakers or amplifiers
- Compact & DIY Friendly: Ideal for upgrading speakers or car audio systems
Capacitive Touch Sensor TTP223 Red
25,00 EGP- Touch-sensitive switch based on capacitive sensing
- Single touch input with toggle on/off output
- Low power consumption, operates at 2V–5.5V
- Red PCB with onboard LED indicator
- Easy to integrate with Arduino and other microcontrollers
- Ideal for replacing mechanical buttons in projects
CJMCU-TRRS 3.5mm Jack AV Stereo Module
25,00 EGP- Mini design, portable and easy to use.
- It is the audio-style connectors that you see on some phones, MP3 players, and development boards.
- Dimensions: 18 x 12 x 6(L x W x H) mm
- Weight: 2 gm
DC-DC Boster MT3608 3V~28Vdc Adjustable Step-Up Converter Module 2A Type C USB
40,00 EGP-
Boosts low DC voltage to higher adjustable output
-
USB Type-C input for easy connectivity
-
Compact and lightweight module
-
High efficiency and stable performance
-
Built-in over-temperature and short-circuit protection
-
Ideal for battery-powered projects and portable electronics
DC-DC Step-Up Power Converter Module XL6009
65,00 EGP- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v;
