أسعار أقل من المتاجر الأخرى توصيل مجاني عند الطلب بقيمة 2000 جنيه أو أكثر نوفر خدمه مابعد البيع دفع آمن باستخدام التحويلات البنكيه دعم على مدار اليوم داخل اوقات العمل، دائمًا هنا لخدمتك
أسعار أقل من المتاجر الأخرى توصيل مجاني عند الطلب بقيمة 2000 جنيه أو أكثر نوفر خدمه مابعد البيع دفع آمن باستخدام التحويلات البنكيه دعم على مدار اليوم داخل اوقات العمل، دائمًا هنا لخدمتك

Weekly Discounts

CNC V3 Shield with 4 DRV8825 Drivers

Original price was: EGP150.00.Current price is: EGP125.00.
  • Four DRV8825 Drivers: High-performance stepper motor control with up to 2.5A per coil.
  • Microstepping Support: Up to 32 microsteps for smooth and precise motion.
  • Adjustable Current Limit: Fine-tune motor performance and driver protection.
  • Heat Sink Compatible: Provisions for heat sinks to manage driver temperature.
  • Arduino Compatibility: Works with Arduino Uno, Nano, and other boards.
  • User-Friendly Connections: Clearly labeled for easy wiring and setup.
  • GRBL Firmware Support: Compatible with popular CNC software for seamless control.

AS608 Optical Fingerprint Sensor Module

Original price was: EGP1,100.00.Current price is: EGP1,000.00.
  1. Resolution: 500dpi
  2. Supply current: <60mA
  3. Supply voltage: 3.3V
  4. Fingerprint image entry time: <1.0 seconds
  5. Peak current: <60mA

STM32F103C8T6 32-Bit ARM Development Board

Original price was: EGP300.00.Current price is: EGP240.00.
  1. 100% Brand new and high quality STM32 Board
  2. Model: STM32F103C8T6.
  3. Core: ARM 32 Cortex-M3 CPU.
  4. Debug mode: SWD.
  5. 72MHz work frequency.
  6. 64K flash memory, 20K SRAM.
  7. 2.0-3.6V power, I/O.

DC 5V to DC 12V USB Voltage Step-Up Converter Cable with DC Jack 5.5 x 2.1mm

Original price was: EGP140.00.Current price is: EGP110.00.
  1. Voltage : Input through (USB) DC 5V
  2. Output via (DC Round Pin) : DC 12V
  3. Color: BLACK
  4. Input / Output Current: Maximum Input 0.6
  5. Easier for installation save time and money
  6. Easy to use.

RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag

Original price was: EGP150.00.Current price is: EGP135.00.
  1. Voltage: DC 3.3V (Do not use 5V supply)
  2. Operating Current :13-26mA
  3. Idle Current :10-13mA
  4. Operating Frequency: 13.56MHz
  5. Highly integrated analog circuitry to demodulate and decode responses
  6. Supports ISO/IEC 14443 A/MIFARE
  7. Typical operating distance in reading/Write mode up to 50 mm

Raspberry Pi Pico W

Original price was: EGP830.00.Current price is: EGP750.00.
  1. RP2040 microcontroller with 2MB of flash memory
  2. On-board single-band 2.4GHz wireless interfaces (802.11n)
  3. Micro USB B port for power and data (and for reprogramming the flash)
  4. 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
  5. Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
  6. 23 GPIO are digital-only, with three also being ADC capable

Feature Products

L298N Motor Driver Module – 2A Dual Channel

EGP85.00
  1. Logical voltage: 5V
  2. Drive voltage: 5V-35V
  3. Logical current: 0-36mA
  4. Drive current: 2A (max. single bridge)
  5. Max power: 25W
  6. Dimensions: 44 x 44 x 28 (LxWxH)mm
  7. Weight: 26 gm

IR Sensor Infrared Obstacle Avoidance Module

EGP35.00
  1. Detection distance: 2 ~ 30cm
  2. Detection angle: 35 °
  3. Comparator chip: LM393
  4. 3mm screw holes for easy mounting

HC-SR04 Ultrasonic Distance Sensor Module

EGP45.00
  1. Operating Voltage: 5 V
  2. Sonar Sensing Range: 2-400 cm
  3. Max. Sensing Range: 450 cm
  4. Frequency: 40 kHz

20cm Male-to-Female Jumper Wires

EGP1.00
This is 20CM Dupont Wire Color Jumper Cable, 2.54mm 1P-1P Male to Female 40PCS. A very Flexible and easily detachable

Arduino UNO R3 CH340G ATMega328P

EGP330.00
Arduino Uno is one of the most popular development platforms. Although it is the most widely used among Arduino motherboards,

GY-521 MPU-6050 I2C Module 3-Axis Gyro & Accelerometer for Arduino

EGP145.00
  1. 3-axis Gyro+Acceleration+Magnetic Fiel
  2. Air Pressure Module
  3. Power supply: 3-5V
  4. Build in ultra low noise linear LDO voltage regulator
  5. Built-in onboard filters, which reduce noise from motor and other high current electronics
  6. You can easily select two I2C address for MPU6050 by soldered jumper

raspberry pi & Embedded boards

CNC V3 Shield with 4 DRV8825 Drivers

Original price was: EGP150.00.Current price is: EGP125.00.
  • Four DRV8825 Drivers: High-performance stepper motor control with up to 2.5A per coil.
  • Microstepping Support: Up to 32 microsteps for smooth and precise motion.
  • Adjustable Current Limit: Fine-tune motor performance and driver protection.
  • Heat Sink Compatible: Provisions for heat sinks to manage driver temperature.
  • Arduino Compatibility: Works with Arduino Uno, Nano, and other boards.
  • User-Friendly Connections: Clearly labeled for easy wiring and setup.
  • GRBL Firmware Support: Compatible with popular CNC software for seamless control.

STM32F103C8T6 32-Bit ARM Development Board

Original price was: EGP300.00.Current price is: EGP240.00.
  1. 100% Brand new and high quality STM32 Board
  2. Model: STM32F103C8T6.
  3. Core: ARM 32 Cortex-M3 CPU.
  4. Debug mode: SWD.
  5. 72MHz work frequency.
  6. 64K flash memory, 20K SRAM.
  7. 2.0-3.6V power, I/O.

Raspberry Pi 4 Computer Model B – 8GB RAM – Made in UK

Original price was: EGP8,500.00.Current price is: EGP6,200.00.
  1. Quad-Core 64-bit Broadcom 2711, Cortex A72  Processor
  2. WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
  3. LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
  4. Operating Power 5V@3A  via USB Type-C port
  5. Dual-Display Micro HDMI Ports which support H 265 Decode for 4K Video @60p

TI LaunchPad Tiva C “EK-TM4C123GXL” Evaluation Kit

Original price was: EGP3,500.00.Current price is: EGP2,500.00.
The EK-TM4C123GXL LaunchPad features on-board emulation, which means you can program and debug your projects without the need for additional

Raspberry Pi 4 Model-B with 4 GB RAM

Original price was: EGP7,500.00.Current price is: EGP4,500.00.
  1. 1GB/2GB/4GB Variants
  2. Quad-Core 64-bit Broadcom 2711, Cortex A72  Processor
  3. WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
  4. LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
  5. Operating Power 5V@3A  via USB Type-C port
  6. Dual-Display Micro HDMI Ports which support H 265 Decode for 4K Video @60p

Arduino Boards

Arduino MEGA 2560 R3 with CH340 Chip

Original price was: EGP1,500.00.Current price is: EGP1,250.00.
  1. Programmer: CH340
  2. Operating Voltage 5V
  3. Input Voltage (recommended) 7-12V
  4. Input Voltage (limits) 6-20V
  5. Digital I/O Pins 54 (of which 15 provide PWM output)
  6. Analog Input Pins 16
  7. DC Current per I/O Pin 40 mA
  8. DC Current for 3.3V Pin 50 mA
  9. Flash Memory 256 KB of which 8 KB used by bootloader

Arduino Uno R3 Without Cable

Original price was: EGP475.00.Current price is: EGP430.00.
  1. Micro-controller : ATmega328.
  2. Operating Voltage : 5V.
  3. Input Voltage (recommended) : 7-12V.
  4. Digital I/O Pins : 14 (of which 6 provide PWM output).
  5. Analog Input Pins : 6.

Arduino mega 2560 ATmega2560-16AU Board

Original price was: EGP1,740.00.Current price is: EGP1,300.00.
  1. 54 digital input / output terminals (14 of which have programmable PWM outputs).
  2. 16 analog inputs.
  3. 4 UARTs (hardware serial ports).
  4. 16 MHz crystal clock.
  5. Operating voltage: 6 ~ 12v.
  6. Dimensions: 110 x 53 x 15 mm.

Arduino UNO R4 WiFi

EGP1,400.00
  1. Same form factor as UNO R3
  2. Inbuilt Wi-Fi and Bluetooth
  3. Onboard 12×8 LED Matrix
  4. Extra onboard peripherals
  5. Inbuilt HID Support
  6. Expanded Memory and Faster Clock Speed than before

Arduino UNO R4 Minima

EGP850.00
  1. Same form factor as UNO R3
  2. Extra onboard peripherals
  3. Inbuilt HID Support
  4. Expanded Memory and Faster Clock Speed than before

Sensors

GY-521 MPU-6050 I2C Module 3-Axis Gyro & Accelerometer for Arduino

EGP145.00
  1. 3-axis Gyro+Acceleration+Magnetic Fiel
  2. Air Pressure Module
  3. Power supply: 3-5V
  4. Build in ultra low noise linear LDO voltage regulator
  5. Built-in onboard filters, which reduce noise from motor and other high current electronics
  6. You can easily select two I2C address for MPU6050 by soldered jumper

Arduino Nano V3.0 CH340 Chip Board,Atmega328P

EGP250.00
  1. Operating Voltage (logic level): 5V
  2. With Soldered Connector
  3. 8 analog inputs ports: A0 ~ A7
  4. 14 Digital input / output ports: TX, RX, D2 ~ D13
  5. 1 pair of TTL level serial transceiver ports RX / TX
  6. Using Atmel Atmega328P-AU MCU
  7. There is a bootloader installed in it
  8. Standard 0.1” spacing DIP (breadboard friendly).
  9. Manual reset switch.

Arduino UNO R3 CH340G ATMega328P

EGP330.00
Arduino Uno is one of the most popular development platforms. Although it is the most widely used among Arduino motherboards,

20cm Male-to-Male Jumper Wires

EGP1.00
This is 20CM Dupont Wire Color Jumper Cable, 2.54mm 1P-1P Male to Male 40PCS. A very Flexible and easily detachable

20cm Male-to-Female Jumper Wires

EGP1.00
This is 20CM Dupont Wire Color Jumper Cable, 2.54mm 1P-1P Male to Female 40PCS. A very Flexible and easily detachable

20cm Female to Female Jumper Wires

EGP1.00
This is 20CM Dupont Wire Color Jumper Cable, 2.54mm 1P-1P Male to Male 40PCS. A very Flexible and easily detachable

Recently Viewed