Sensors
12mm 12528 LDR，10-20K
15,00 EGP✅ 12mm CdS photoresistor
✅ 10k–20k Ω resistance in dark
✅ Sensitive to visible light (peak ~520 nm)
✅ Fast response time (~10 ms)
✅ Ideal for light sensing and automation
3 Channel Path Tracing Module
170,00 EGP- Integrated 3 IR sensors for accurate line/path detection
- Designed for black/white line tracking applications
- Output: Digital signal (HIGH/LOW) for each channel
- Adjustable sensitivity via onboard potentiometers
- Compatible with Arduino, Raspberry Pi, and microcontrollers
- Suitable for robotics, smart cars, and AGVs
- Simple 3-pin or 4-pin interface for easy wiring
- Operating Voltage: 3.3V–5V
4 Channel Infrared Tracking Module
160,00 EGP- Working voltage (V): 3.3 ~ 5
- Working current (A): Above 1A
- Operating Temperature (℃): -10 ~ +50
- Mounting hole: M3
- Detection range: 1mm ~ 60 cm adjustable.
4-Pin Light-Dependent Photosensitive Sensor LDR Module
Original price was: 40,00 EGP.35,00 EGPCurrent price is: 35,00 EGP.- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
4PIN IR Infrared Flame Detection Sensor Module
35,00 EGP✅ Compact 4-pin module with digital & analog output
✅ Adjustable sensitivity for varied flame sizes
✅ Compatible with Arduino, Raspberry Pi, and similar boards
✅ Fast and reliable flame detection
5-Channel Flame Sensor Module
150,00 EGP- Detecting range: >120 degree
- Analog and digital outputs
- On-board potentiometer and indicators
- 1% resistors to make this module more reliable and precise
- Operating Voltage: 3.3V – 9V
- Board Diameter: 40 mm.
5A range Current Sensor Module ACS712
100,00 EGP- ⚡ ACS712 current sensor module (5A range)
- 🔁 Measures AC/DC current with Hall-effect sensing
- 📈 Analog voltage output proportional to current
- 🧩 Ideal for Arduino/MCU current monitoring and protection
- 🛡️ Electrical isolation between load and measurement circuit
- ⚡ Low resistance conduction path for minimal power loss
- 🛠️ Easy wiring: VCC, GND, OUT + IP+/IP- terminals
- ✅ Great for power supplies, motors, and battery monitoring
AHT10 High Precision Digital Temperature And Humidity Measurement Module
180,00 EGP- Interface type: I2C
- Working voltage: 1.8 – 6.0 V
- Interface size: 4*2.54mm pitch
- Humidity accuracy: typical ± 2%
- Humidity resolution: 0.024%
- Temperature accuracy: typical ± 0.3 ° C
Analog PH Sensor Kit
1.800,00 EGP- Module power supply: 5 VDC.
- Measuring temperature: 0-50 ℃.
- Response time: ≤ 1min.
- pH sensor with BNC connector.
- Gain adjustment Potentiometer.
- Power indicator LED.
AS608 Optical Fingerprint Sensor Module
Original price was: 900,00 EGP.850,00 EGPCurrent price is: 850,00 EGP.- Resolution: 500dpi
- Supply current: <60mA
- Supply voltage: 3.3V
- Fingerprint image entry time: <1.0 seconds
- Peak current: <60mA
Auto On/Off Photocell LDR Sensor Switch (AS-10, 10A)
170,00 EGP-
Dusk-to-dawn automation: LDR turns lights ON at < 30 lux and OFF at > 150 lux
-
Energy saver: Lights run only when needed, cutting power costs
-
10 A load capacity: Drives up to ≈ 2 200 W of resistive lighting at 220 V AC
-
Anti-interference delay: 10–20 s pause stops false triggers (headlights, lightning)
-
Weatherproof IP44 housing: UV-stable polycarbonate for reliable outdoor use
-
Simple 3-wire hook-up: Live in, neutral, and switched live out
BF120-3AA Precision Strain Gauges (120Ω) for Load Cells
50,00 EGP- 120Ω high-accuracy foil strain gauge
- Gauge factor: 2.0 ± 1% for precise signal output
- Compact 3×5mm grid for easy mounting
- Wide temperature range: -20°C to +80°C
- Stable, durable build suitable for long-term engineering use
