Sensors
12mm 12528 LDR，10-20K
12,00 EGP✅ 12mm CdS photoresistor
✅ 10k–20k Ω resistance in dark
✅ Sensitive to visible light (peak ~520 nm)
✅ Fast response time (~10 ms)
✅ Ideal for light sensing and automation
3 Channel Path Tracing Module
170,00 EGP- Integrated 3 IR sensors for accurate line/path detection
- Designed for black/white line tracking applications
- Output: Digital signal (HIGH/LOW) for each channel
- Adjustable sensitivity via onboard potentiometers
- Compatible with Arduino, Raspberry Pi, and microcontrollers
- Suitable for robotics, smart cars, and AGVs
- Simple 3-pin or 4-pin interface for easy wiring
- Operating Voltage: 3.3V–5V
4 Channel Infrared Tracking Module
160,00 EGP- Working voltage (V): 3.3 ~ 5
- Working current (A): Above 1A
- Operating Temperature (℃): -10 ~ +50
- Mounting hole: M3
- Detection range: 1mm ~ 60 cm adjustable.
4-Pin Light-Dependent Photosensitive Sensor LDR Module
Original price was: 40,00 EGP.35,00 EGPCurrent price is: 35,00 EGP.- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
4PIN IR Infrared Flame Detection Sensor Module
35,00 EGP✅ Compact 4-pin module with digital & analog output
✅ Adjustable sensitivity for varied flame sizes
✅ Compatible with Arduino, Raspberry Pi, and similar boards
✅ Fast and reliable flame detection
5-Channel Flame Sensor Module
150,00 EGP- Detecting range: >120 degree
- Analog and digital outputs
- On-board potentiometer and indicators
- 1% resistors to make this module more reliable and precise
- Operating Voltage: 3.3V – 9V
- Board Diameter: 40 mm.
AHT10 High Precision Digital Temperature And Humidity Measurement Module
180,00 EGP- Interface type: I2C
- Working voltage: 1.8 – 6.0 V
- Interface size: 4*2.54mm pitch
- Humidity accuracy: typical ± 2%
- Humidity resolution: 0.024%
- Temperature accuracy: typical ± 0.3 ° C
Analog PH Sensor Kit
1.800,00 EGP- Module power supply: 5 VDC.
- Measuring temperature: 0-50 ℃.
- Response time: ≤ 1min.
- pH sensor with BNC connector.
- Gain adjustment Potentiometer.
- Power indicator LED.
AS608 Optical Fingerprint Sensor Module
Original price was: 900,00 EGP.850,00 EGPCurrent price is: 850,00 EGP.- Resolution: 500dpi
- Supply current: <60mA
- Supply voltage: 3.3V
- Fingerprint image entry time: <1.0 seconds
- Peak current: <60mA
BF120-3AA Precision Strain Gauges (120Ω) for Load Cells
50,00 EGP- 120Ω high-accuracy foil strain gauge
- Gauge factor: 2.0 ± 1% for precise signal output
- Compact 3×5mm grid for easy mounting
- Wide temperature range: -20°C to +80°C
- Stable, durable build suitable for long-term engineering use
Bluetooth Audio Receiver Board Module (VHM-314) (Type C)
100,00 EGP- Bluetooth 5.0: Stable, fast wireless audio streaming
- Type-C Power Input: Easy 5V supply via USB-C or battery
- High-Quality Audio: Low noise, clear stereo sound
- 3.5mm Output Jack: Connects directly to speakers or amplifiers
- Compact & DIY Friendly: Ideal for upgrading speakers or car audio systems
Capacitive Soil Moisture Sensor
85,00 EGP- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Dimensions mm(LxWxH): 98 x 23 x 4.
- Supports 3-Pin Gravity Sensor interface
- Analog output.
- Weight (gm): 15.
DHT11 Temperature And Humidity Sensor Module with LED
60,00 EGP- 📦 DHT11 sensor on PCB with LED indicator
- 🔌 Operates on 3–5V, 4-pin header (0.1″ spacing)
- 🔧 Built-in pull-up resistor (4.7K or 10K)
- 💧 Humidity: 20–80% (±5%)
- 🌡️ Temp: 0–50°C (±2°C)
- 🔋 Low power use: max 2.5mA during conversion
DHT22 Digital Temperature & Humidity Sensor Module for Arduino DIY Projects Black module
210,00 EGP- 🌡️ Measures temperature and humidity
- 📏 High accuracy (±0.5°C, ±2–5% RH)
- 🧪 Calibrated digital output
- 🔧 No external components needed
- ⚡ Low power consumption
- 🔁 1 reading every 2 seconds
- 🔌 Long-distance signal transmission
- 🧠 Fully factory calibrated and compensated
DHT22 Digital Temperature & Humidity Sensor Module for Arduino DIY Projects Red module
210,00 EGP- 6-pin ON/OFF switch for PCB mounting
- Compact design for tight spaces
- Reliable and durable construction
- Easy to integrate into various circuits
- Ideal for DIY and electronic applications
DIY Metal Detector Kit: DC 3V-5V, 60mm Non-Contact Sensor Module
150,00 EGP-
Complete DIY kit for building a basic metal detector
-
Includes all required electronic components and PCB
-
Built-in detection coil integrated on the high-quality PCB
-
Component values and positions clearly marked on the board
-
Ideal for learning electronics, experimentation, and STEM projects
-
Suitable for applications like security checks, object detection, and fun DIY builds
-
Compact and easy to assemble – great for beginners and hobbyists
DS18B20 Temperature Sensor
45,00 EGP- Digital temperature sensor with 1-wire interface
- Measures temperatures from –55°C to +125°C
- High accuracy ±0.5°C over a wide range
- Requires only one data line for communication
- Can connect multiple sensors on a single bus
- Waterproof versions available for outdoor use
- Compatible with Arduino, Raspberry Pi, and other microcontrollers
DS18B20 Water Proof Temperature Probe – Black (1m)
80,00 EGP- A probe by new original installation import DS18B20 temperature sensor chip.
- Stainless steel tube encapsulation waterproof moistureproof prevents rust.
- Stainless steel shell (6 * 45 mm), lead length 100 mm (shielding wire) use stability;
- 3.0 V-5.5 V power supply;
- Temperature range wide: -55 ℃ ~ + 125 ℃;
- Without the external components, the unique single bus.
Dual-Speed Encoder with Pulse Output
250,00 EGP- Working voltage: 4.5V to 5.5 V
- Transmit tube pressure drop: Vf = 1.6 V
- Transmit tube current: 20 mA
- Distinguish precision: 0.01 mm
- Measurement frequency, 100 kHz
