Development Boards
Arduino mega 2560 ATmega2560-16AU Board
1.400,00 EGP✅ 54 Digital I/O pins with 15 PWM
✅ 4 UARTs and 16 analog inputs
✅ 256 KB Flash, 8 KB SRAM, 4 KB EEPROM
✅ 100% Arduino IDE compatible
✅ Perfect for large-scale embedded projects
Arduino MEGA 2560 R3 with CH340 Chip
Original price was: 1.250,00 EGP.1.200,00 EGPCurrent price is: 1.200,00 EGP.- Programmer: CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by bootloader
Arduino Nano 3.0 Controller Board – FT232
290,00 EGP- Based on ATmega328 microcontroller
- FT232 USB-to-Serial driver for stable PC communication
- Compact and breadboard-friendly design
- 22 total I/O pins (14 Digital, 8 Analog)
- Supports serial, I2C, and SPI communication
- Onboard voltage regulator (5V & 3.3V)
- Preloaded with Arduino bootloader for easy programming
- Ideal for IoT, robotics, sensors, and embedded systems
Arduino Nano V3.0 CH340 Chip Board，Atmega328P
Original price was: 250,00 EGP.210,00 EGPCurrent price is: 210,00 EGP.- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Arduino UNO R3 CH340G ATMega328P
330,00 EGP- ATmega328 SMD microcontroller with Arduino bootloader
- Operating voltage: 5V; input 7-12V recommended
- 14 digital I/O pins (6 PWM), 6 analog inputs
- 32 KB Flash memory, 16 MHz clock speed
- CH340 USB-to-serial interface (driver may be needed)
- Fully compatible with Arduino IDE and libraries
- Includes USB cable for easy programming
Arduino Uno R3 Without Cable
440,00 EGP- ✅ ATmega328P microcontroller
✅ 14 digital and 6 analog I/O pins
✅ USB programming interface (USB cable sold separately)
✅ Compatible with Arduino IDE and shields
✅ Ideal for beginners and hobbyists
Arduino UNO R4 Minima
Original price was: 850,00 EGP.750,00 EGPCurrent price is: 750,00 EGP.- Same form factor as UNO R3
- Extra onboard peripherals
- Inbuilt HID Support
- Expanded Memory and Faster Clock Speed than before
Arduino UNO R4 WiFi
Original price was: 1.400,00 EGP.1.100,00 EGPCurrent price is: 1.100,00 EGP.- Same form factor as UNO R3
- Inbuilt Wi-Fi and Bluetooth
- Onboard 12×8 LED Matrix
- Extra onboard peripherals
- Inbuilt HID Support
- Expanded Memory and Faster Clock Speed than before
ESP32 38Pin MICRO
450,00 EGP2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applications
ESP32 D1 Mini – Dual Core WiFi Bluetooth Module
350,00 EGP- Dual-core ESP32 @ 240MHz
- Built-in WiFi (802.11 b/g/n) + Bluetooth 4.2
- Compact D1 Mini form factor
- 4MB Flash memory
- Supports Arduino IDE and MicroPython
ESP32 Development Board 38 pin WIFI – Bluetooth (Type C)
380,00 EGP-
Dual-Core ESP32 Processor with WiFi and Bluetooth support
-
38 GPIO Pins for versatile connectivity
-
Type-C USB Port for fast and reliable power/data
-
Built-in Flash & Antenna for wireless applications
-
Ideal for IoT, Smart Devices, and Embedded Projects
ESP32-CAM-WROVER Dual-Core WiFi Module with Camera
750,00 EGP- Built-in ESP32 Dual-Core WiFi + Bluetooth
- Includes OV2640 2MP Camera
- Supports image streaming & face detection
- Ultra-low-power design
- No microSD card slot
- Compatible with Arduino IDE & ESP-IDF
- Ideal for IoT, AI vision, and surveillance projects
FunDuino UNO (ATMega 328P board compatible with Arduino Uno) (Arduino Compatible)
650,00 EGP-
ATmega328P Microcontroller fully compatible with Arduino UNO
-
USB Interface (CH340 or FTDI) for easy PC connection
-
14 Digital I/O Pins, 6 Analog Inputs, PWM support
-
Standard Arduino UNO Form Factor for shield compatibility
-
Ideal for Beginners, Prototyping, and Educational Use
Pro Mini ATMEGA328P 5V/16M Blue
Original price was: 240,00 EGP.200,00 EGPCurrent price is: 200,00 EGP.- Based on ATmega328P microcontroller
- Operates at 5V, 16 MHz clock speed
- Compact, small form factor (Blue PCB)
- Compatible with Arduino IDE for easy programming
- Low power consumption, ideal for embedded projects
- Includes RAW and VCC power input pins
Raspberry Pi Pico (RP2040)
560,00 EGP- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Onboard temperature sensor
Raspberry Pi Pico W
750,00 EGP- RP2040 microcontroller with 2MB of flash memory
- On-board single-band 2.4GHz wireless interfaces (802.11n)
- Micro USB B port for power and data (and for reprogramming the flash)
- 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
- Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
- 23 GPIO are digital-only, with three also being ADC capable
STM32F103C8T6 32-Bit ARM Development Board
Original price was: 300,00 EGP.250,00 EGPCurrent price is: 250,00 EGP.-
Powered by STM32F103C8T6 ARM Cortex-M3 microcontroller
-
72 MHz clock speed for high-performance tasks
-
64KB Flash and 20KB SRAM memory
-
Supports USART, SPI, I2C, ADC (12-bit), PWM, USB
-
Up to 37 I/O pins with alternate functions
-
Mini USB port for programming via built-in bootloader
-
Programmable using STM32CubeIDE, Arduino IDE (STM32 core), PlatformIO
-
Supports in-circuit programming/debugging via ST-Link V2
TI LaunchPad Tiva C “EK-TM4C123GXL” Evaluation Kit
Original price was: 2.800,00 EGP.2.200,00 EGPCurrent price is: 2.200,00 EGP.✅ Cortex-M4F with FPU, 80 MHz
✅ 256 KB flash, 32 KB SRAM
✅ Multiple comm interfaces (UART, SPI, I2C, USB, CAN)
✅ Onboard debug/program with ICDI
✅ Compatible with BoosterPacks for extended functionality
Transparent Acrylic Shell Box For Arduino UNO R3
35,00 EGP- Clear Acrylic Design: Offers full visibility of the board and status LEDs
- Perfect Fit: Precisely cut for Arduino UNO R3, with access to all ports and headers
- Protective Enclosure: Shields against dust, damage, and short circuits
- Easy Assembly: Comes with screws and layers for simple setup
- Durable & Lightweight: Sturdy yet portable for projects and displays
