ARRIVALS

NEW ARRIVALS

Arduino Boards , Sensors , Modules , Integrated Circuits (ICs)

2.4GHz SMA to IPEX Folded Antenna – 2.5dBi WiFi Bluetooth ZigBee

150,00 EGP
Add to cart
  • 2.4GHz Frequency Band
  • 2.5dBi Signal Gain
  • SMA to IPEX (U.FL) Connector
  • Supports WiFi, Bluetooth & ZigBee
  • Foldable Antenna Design
  • Stable & Reliable Performance
  • Ideal for IoT & Wireless Devices

3.3V/5V MB102 Breadboard Power Supply Module

50,00 EGP
Add to cart
Breadboard power supply module, compatible with 5V, 3.3V. Apply to MB102 breadboard Input voltage: 6.5-12 V (DC) or USB power supply Output voltage: 3.3V/5V can switch over Maximum output current: <700 ma Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.

4×4 Matrix Keypad

35,00 EGP
Add to cart
  1. Ultra-thin design & adhesive backing provides easy integration to any project
  2. Excellent price-performance ratio
  3. Easy communication with any microcontroller
  4. 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
  5. Sticker can peel off for adhesive mounting.
  6. Operating Voltage (V): 12 DC

7400 Quad 2-input NAND Gate

14,00 EGP
Add to cart
  • Contains four independent 2-input NAND gates
  • Operates at standard 5V TTL logic levels
  • Performs NAND logic on two inputs per gate
  • Fast switching with low propagation delay
  • Available in 14-pin DIP or SMD packages

AS608 Optical Fingerprint Sensor Module

Original price was: 900,00 EGP.Current price is: 850,00 EGP.
Add to cart
  1. Resolution: 500dpi
  2. Supply current: <60mA
  3. Supply voltage: 3.3V
  4. Fingerprint image entry time: <1.0 seconds
  5. Peak current: <60mA

ATGM336H Dual-Mode GNSS GPS Module – High Sensitivity, Fast Fix, NEO-M8N Compatible

750,00 EGP
Add to cart
  • Dual-Mode GNSS (GPS + BeiDou)
  • High positioning accuracy
  • Fast satellite lock (Quick TTFF)
  • High sensitivity receiver
  • NEO-M8N compatible
  • Low power consumption
  • UART interface with NMEA output
  • Compact and lightweight design

DC 3V 70mA 12000 RPM Vibration Motors

20,00 EGP
Add to cart
  • ⚡ Low power operation at 3V DC
  • 🔋 Efficient current draw: only 70mA
  • 🚀 High-speed rotation: 12000 RPM
  • 📦 Compact and lightweight design
  • 📳 Strong vibration output for haptic feedback
  • 🔧 Coreless motor with eccentric weight
  • 🧩 Easy to integrate into small devices
  • 💪 Durable for continuous use in portable electronics

DC 5V to DC 12V USB Voltage Step-Up Converter Cable with DC Jack 5.5 x 2.1mm

75,00 EGP
Add to cart
  1. Voltage : Input through (USB) DC 5V
  2. Output via (DC Round Pin) : DC 12V
  3. Color: BLACK
  4. Input / Output Current: Maximum Input 0.6
  5. Easier for installation save time and money
  6. Easy to use.

DS18B20 Temperature Sensor

45,00 EGP
Add to cart
  • Digital temperature sensor with 1-wire interface
  • Measures temperatures from –55°C to +125°C
  • High accuracy ±0.5°C over a wide range
  • Requires only one data line for communication
  • Can connect multiple sensors on a single bus
  • Waterproof versions available for outdoor use
  • Compatible with Arduino, Raspberry Pi, and other microcontrollers

Dual-Speed Encoder with Pulse Output

250,00 EGP
Add to cart
  1. Working voltage: 4.5V to 5.5 V
  2. Transmit tube pressure drop: Vf = 1.6 V
  3. Transmit tube current: 20 mA
  4. Distinguish precision: 0.01 mm
  5. Measurement frequency, 100 kHz

Gripper – Robot Mechanical Arm Aluminum Metal Claws

Original price was: 370,00 EGP.Current price is: 350,00 EGP.
Add to cart
  1. The degree of Freedom (DOF): 2
  2. Paw material: aluminum alloy
  3. Paw weight: about 68g (without motor)
  4. Claws overall length: 108mm (overall maximum length when closed paw)
  5. Claws overall width: 98mm (maximum overall width of the paw when open)
  6. Paw maximum opening angle: 55mm

L298N Motor Driver Module – 2A Dual Channel

Original price was: 95,00 EGP.Current price is: 90,00 EGP.
Add to cart
  1. Logical voltage: 5V
  2. Drive voltage: 5V-35V
  3. Logical current: 0-36mA
  4. Drive current: 2A (max. single bridge)
  5. Max power: 25W
  6. Dimensions: 44 x 44 x 28 (LxWxH)mm
  7. Weight: 26 gm

LM35DZ Temperature Sensor Chinese

75,00 EGP
Add to cart
  1. 🎯 Calibrated in Celsius (°C)
  2. 📏 10.0 mV/°C linear output
  3. ✅ ±0.5°C accuracy at 25°C
  4. 🔋 Operating voltage: 4V–30V
  5. 🔌 Ultra-low current: <60 µA
  6. 🔥 Low self-heating: 0.08°C
  7. 🧪 Minimal non-linearity: 0.25°C
  8. 📤 Low output impedance: 0.1Ω

Micro Servo SG90 – 0 to 180 Degrees, 1.8 kg.cm, Plastic Gears

95,00 EGP
Add to cart
  1. Model: SG90
  2. Weight: 9 gm
  3. Operating voltage: 3.0V~ 7.2V
  4. Servo Plug: JR
  5. Stall torque @4.8V : 1.2kg-cm
  6. Stall torque @6.6V : 1.6kg-cm

PICkit3 Debugger Programmer Emulator Controller Development Board

2.200,00 EGP
Add to cart
  1. Full-speed USB support using Windows standard drivers
  2. Real-time execution
  3. Processors run at maximum speeds
  4. Built-in over-voltage/short circuit monitor
  5. Low voltage to 5V (1.8 to the 5V range)
  6. Read/write program and data memory of the microcontroller
  7. Program up to 512K byte flash.

Raspberry Pi Pico W

750,00 EGP
Add to cart
  1. RP2040 microcontroller with 2MB of flash memory
  2. On-board single-band 2.4GHz wireless interfaces (802.11n)
  3. Micro USB B port for power and data (and for reprogramming the flash)
  4. 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
  5. Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
  6. 23 GPIO are digital-only, with three also being ADC capable

Servo Motor Standard (180) 11 kg.cm Metal Gears “MG996”

230,00 EGP
Add to cart
  1. Weight: 55g
  2. Dimension: 40.7×19.7×42.9mm
  3. Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
  4. Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
  5. Operating voltage: 4.8 ~ 6.6V
  6. Gear Type: Metal gear
  7. Dead band width: 1us
  8. Wire length: 32cm

Solar Panel 1W 5V

150,00 EGP
Add to cart
  • 1 Watt power output at ~5V
  • Compact and easy to integrate
  • Renewable and clean solar energy source
  • Ideal for small-scale solar and battery charging projects

TM1637 4-Digit LED Display Module with Clock for Arduino

75,00 EGP
Add to cart
  1. Driver Chip: MAX7219
  2. Input Voltage: 3.7 to 5.3 V
  3. Input Current: 30 mA
  4. Display Dimensions: 42x24x12 (LxWxH) mm