Shop
3M Multipurpose Double Sided Mounting Tape – Washable Traceless 36 MM
40,00 EGP-
Strong double-sided adhesive with nano gel technology
-
Washable and reusable – simply rinse and dry
-
Traceless removal – leaves no sticky residue
-
36mm wide – ideal for heavy-duty applications
-
Easy to cut and apply on various surfaces
-
Sticks to glass, metal, tile, plastic, wood, and more
3S 10A 12V 18650 Lithium Battery Charger Board Protection Module BMS
55,00 EGP- Over discharge voltage range : 2.3-3.0 v ± 0.05.
- Recharge voltage range: 4.25-4.35 v ± 0.05 v.
- Operating current : 6-8A.
- Operating temperature : -40 to + 50 ℃.
- Current limit : 10-13A.
3S 20A 12V 18650 Lithium Battery Charger Board Protection Module BMS
65,00 EGP- 3S 12V Configuration: Designed for 3-series 18650 lithium batteries (10.8V–12.6V system).
- 20A Discharge Current: Supports high current output, suitable for power tools and e-bikes.
- Built-in BMS Protection: Includes overcharge, over-discharge, overcurrent, and short circuit protection.
- Compact Design: Lightweight and easy to integrate into custom battery packs.
- Efficient Charging Management: Ensures safe and balanced charging across all cells.
4 Channel Infrared Tracking Module
160,00 EGP- Working voltage (V): 3.3 ~ 5
- Working current (A): Above 1A
- Operating Temperature (℃): -10 ~ +50
- Mounting hole: M3
- Detection range: 1mm ~ 60 cm adjustable.
4 Position DIP Switch
6,50 EGP- 4 Independent Switches: Allows up to 16 ON/OFF configuration combinations.
- Compact Size: Ideal for space-constrained electronic projects.
- Manual Toggle Control: Simple, tool-free operation.
- Reliable Contacts: Low contact resistance for stable performance.
- Voltage & Current Rating: Up to 24V DC, 0.1–1A depending on model.
- Mounting Type: Through-hole or surface mount.
- Durable Build: Made of high-quality plastic and metal for long-term use.
- Applications: Used in embedded systems, robotics, DIY electronics, and device configuration.
4 WD Double Layer Smart Car Chassis Kit
Original price was: 475,00 EGP.420,00 EGPCurrent price is: 420,00 EGP.- Very handy and simple in assembling/disassembling.
- Strong components so as to withstand extreme terrain conditions.
- Transparent Car Chassis.
- Attractive design.
4-Pin Light-Dependent Photosensitive Sensor LDR Module
Original price was: 40,00 EGP.35,00 EGPCurrent price is: 35,00 EGP.- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Signal output indicator light.
- LDR module 4 PIN
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
4.7k ohm 1/4 Watt
0,25 EGP✅ 4.7K ohm resistor
✅ 0.25 watt power rating
✅ Through-hole axial leaded package
✅ Suitable for low-power electronics
4×4 Matrix 16 Keyboard Keypad
Original price was: 150,00 EGP.130,00 EGPCurrent price is: 130,00 EGP.- Easy communication with any microcontroller.
- Tactile type switches.
- Over 1,000,000 operations per key.
- Contact rated for 12V dc @ 20mA.
- Over 1,000,000 operations per key.
4×4 Matrix Keypad
35,00 EGP- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 12 DC
433MHz HC-12 Wireless Serial Port Module (1000m Range)
275,00 EGP- Compact, low-power 433MHz RF transceiver.
- Transparent TTL UART (serial) interface — plug & play.
- Long range: up to 1000 m line-of-sight (with suitable antenna).
- Configurable via AT commands (baud rate, channel, power, mode).
- Wide operating voltage for direct microcontroller connection.
- Low standby/operating current — suitable for battery systems.
- Reliable data link for telemetry, remote control, and sensor networks.
4PIN IR Infrared Flame Detection Sensor Module
35,00 EGP✅ Compact 4-pin module with digital & analog output
✅ Adjustable sensitivity for varied flame sizes
✅ Compatible with Arduino, Raspberry Pi, and similar boards
✅ Fast and reliable flame detection
4WD RC car steering wheel not encolude component
Original price was: 450,00 EGP.380,00 EGPCurrent price is: 380,00 EGP.
5-Channel Flame Sensor Module
150,00 EGP- Detecting range: >120 degree
- Analog and digital outputs
- On-board potentiometer and indicators
- 1% resistors to make this module more reliable and precise
- Operating Voltage: 3.3V – 9V
- Board Diameter: 40 mm.
5-Pin Relay Holder Case Base for Breadboard (Unassembled)
30,00 EGPHigh RPM (~12000 at 5V) for dynamic mechanical tasks
500Ma Mini Solar Lipo Charger Board
100,00 EGP-
Based on CN3065 charge controller IC
-
Designed for single-cell LiPo battery charging
-
Solar panel input: 4.4V–6V
-
Max charging current: 500mA
-
Supports Micro-USB & solar input
-
JST-PH2.0 connectors for easy wiring
-
Battery status LEDs: Red (Charging), Green (Charged)
-
Built-in short circuit protection
-
Compact size, ideal for portable solar projects
-
Randomly shipped in HW-736 or equivalent version
