Shop
7448 (BCD to 7-Segment Decoder/Driver Common CATHODE)
30,00 EGP- Converts 4-bit BCD input to 7-segment display output
- Drives common cathode 7-segment LEDs directly
- TTL compatible inputs and outputs
- Includes lamp test and blanking inputs
- Supports ripple blanking for multi-digit displays
- Operates at standard 5V power supply
- Available in 16-pin DIP and SOIC packages
7474 Dual D Flip-Flop
20,00 EGP- Contains two independent D-type flip-flops
- Features asynchronous preset and clear inputs
- Positive-edge triggered clock input
- Standard TTL logic level compatible
- Used in data storage, registers, and timing circuits
7476 Dual JK Flip-Flop with Preset and Clear
18,00 EGP- Contains two independent JK flip-flops
- Features asynchronous preset and clear inputs
- Operates on standard TTL logic levels
- Edge-triggered on clock input
- Commonly used in counters, registers, and memory circuits
7483 4-bit Binary Full Adder
22,00 EGP- Performs 4-bit binary addition with carry input/output
- High-speed arithmetic operation
- TTL logic level compatible
- Used in digital calculators, ALUs, and arithmetic circuits
- Can be cascaded for wider bit addition
7485 4-bit Magnitude Comparator
25,00 EGP- Compares two 4-bit binary numbers (A and B)
- Provides outputs for A > B, A = B, and A < B
- Operates with standard TTL logic levels
- Cascadable for comparing larger bit-width numbers
- Commonly used in digital sorting, arithmetic, and decision circuits
7486 Quad EXCLUSIVE-OR Gate
14,00 EGP- Contains four independent 2-input XOR gates
- Operates on standard TTL logic levels
- Used for parity checking, bitwise addition, and logic functions
- Fast switching speed with low power consumption
- Widely used in digital circuits and signal processing
7490 Decade Counter
25,00 EGP-
4-bit binary decade counter IC
-
Counts from 0 to 9 (decimal) and then resets
-
Supports asynchronous reset and preset inputs
-
Operates at standard TTL logic levels
-
Commonly used in digital clocks, frequency dividers, and counters
8 Position DIP Switch
11,00 EGP- 8 individual ON/OFF toggle switches
- Standard 2.54mm DIP format
- Through-hole mounting for PCB
- Rated for 12–24V DC, 25–50mA
- High insulation resistance (≥100MΩ)
- Compact binary configuration solution
- Ideal for address, mode, and feature settings
8-Channel Bi-Directional Logic Level Converter TXS0108E for Arduino
65,00 EGP- 8 Channels: Supports 8 data lines for versatile applications.
- Bi-Directional: Handles signal conversion in both directions.
- Wide Voltage Range: Compatible with 1.2V to 5.5V logic levels.
- Automatic Direction Detection: No need for manual configuration.
- Compact Design: Ideal for space-constrained projects.
8.2k ohm 1/4 Watt (4pcs)
0,25 EGP✅ 8.2K ohm resistor
✅ 0.25 watt power rating
✅ Through-hole axial leaded package
✅ Suitable for low-power electronics
82D05 5V Digital Power Channel Amplifier Bluetooth Speaker Module
50,00 EGP-
5V Power Supply for USB or battery-powered projects
-
Built-in Bluetooth Receiver for wireless audio streaming
-
Stereo Output with left and right channel terminals
-
Compact Size ideal for DIY speakers and audio projects
-
Low Power Consumption with efficient digital amplification
9V 10cm Battery Connector
5,00 EGP- Hard leather construction with fine workmanship
- Red and black wires to prevent polarity mistakes
- 10 cm cable length for flexible connections
- Prevents short circuits and ensures reliable power delivery
- Snap-on connector for quick battery attachment/detachment
A2212 1000KV Brushless Motor Kit – Efficient Power for RC Aircraft & DIY Projects
400,00 EGP-
1000KV Rating: Balanced RPM for stable, efficient flight
-
Complete Kit: Includes motor, X-mount, prop adapter, and screws
-
Lightweight: Weighs ~50g, perfect for park flyers and gliders
-
Durable Build: Features ball bearings, strong magnets, and quality windings
-
Easy Setup: Pre-soldered 3.5mm connectors for plug-and-play
-
Versatile Use: Ideal for RC planes, drones, gliders, and robotics
-
Budget-Friendly: Great value for beginners and DIY projects
A4988 Stepper Motor Driver
75,00 EGP- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
AC/DC Power Adapter (5V 1A)
50,00 EGP- Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz.
- Input current (mA): 100.
- Output Power: 5V 1A.
- Input Plug: 2-Pin EU type.
- Output Plug: 5.5mm DC plug.
ADC0808CCN PDIP-28 Analog to Digital Converter-ADC
Original price was: 150,00 EGP.120,00 EGPCurrent price is: 120,00 EGP.✅ 8-bit ADC with 8 input channels
✅ Parallel 8-bit digital output
✅ Single +5V power supply operation
✅ Fast conversion (~100 µs)
✅ Standard 28-pin PDIP package
AHT10 High Precision Digital Temperature And Humidity Measurement Module
180,00 EGP- Interface type: I2C
- Working voltage: 1.8 – 6.0 V
- Interface size: 4*2.54mm pitch
- Humidity accuracy: typical ± 2%
- Humidity resolution: 0.024%
- Temperature accuracy: typical ± 0.3 ° C
Ai Thinker ESP32 CAM Development Board WiFi+Bluetooth with AF2569 Camera Module
550,00 EGP- Dual-core ESP32-WROOM-32 processor (up to 240 MHz)
- WiFi 802.11 b/g/n + Bluetooth 4.2 (BLE + BR/EDR)
- OV2640 2MP camera module
- Supports microSD card up to 32 GB
- Multiple GPIOs for sensors and peripherals
- Compact design, low power consumption
AMS1117 3.3V Voltage Regulator Power Module – 800mA Output for Arduino & Microcontrollers
20,00 EGP-
Regulated 3.3 V Output ideal for powering sensors and microcontrollers
-
800 mA Maximum Current suitable for moderate-load electronics
-
Onboard Capacitors for stable voltage with minimal ripple
-
Compact PCB Module easy to integrate into DIY circuits
-
Standard Input Range supports up to ~12 V input voltage
