IoT and Wireless
2.4GHz Wireless Transceiver nRF 24L01 (85 meter)
65,00 EGP✅ Frequency: 2.4GHz ISM Band (Worldwide Compatibility)
✅ Range: Up to 85 meters (open space, with external antenna)
✅ Data Rate: 250kbps, 1Mbps, or 2Mbps (adjustable)
✅ Low Power Consumption: Suitable for battery-operated devices
✅ SPI Interface: Easy integration with microcontrollers
✅ 6 Data Pipes: Enables multiple communication channels
✅ Compact Size: Lightweight and easy to embed in projects
✅ Supply Voltage: 1.9V to 3.6V (3.3V recommended)
✅ ShockBurst™ Technology: Automatic packet handling for efficient transmission
433MHz HC-12 Wireless Serial Port Module (1000m Range)
275,00 EGP- Compact, low-power 433MHz RF transceiver.
- Transparent TTL UART (serial) interface — plug & play.
- Long range: up to 1000 m line-of-sight (with suitable antenna).
- Configurable via AT commands (baud rate, channel, power, mode).
- Wide operating voltage for direct microcontroller connection.
- Low standby/operating current — suitable for battery systems.
- Reliable data link for telemetry, remote control, and sensor networks.
82D05 5V Digital Power Channel Amplifier Bluetooth Speaker Module
50,00 EGP-
5V Power Supply for USB or battery-powered projects
-
Built-in Bluetooth Receiver for wireless audio streaming
-
Stereo Output with left and right channel terminals
-
Compact Size ideal for DIY speakers and audio projects
-
Low Power Consumption with efficient digital amplification
Ai Thinker ESP32 CAM Development Board WiFi+Bluetooth with OV3660 Camera Module
650,00 EGP- Dual-core ESP32-WROOM-32 processor (up to 240 MHz)
- WiFi 802.11 b/g/n + Bluetooth 4.2 (BLE + BR/EDR)
- OV2640 2MP camera module
- Supports microSD card up to 32 GB
- Multiple GPIOs for sensors and peripherals
- Compact design, low power consumption
ESP-01 ESP8266 Serial WiFi Module
110,00 EGP- 📡 ESP-01 module based on ESP8266 WiFi SoC
- 🔌 UART serial interface for easy communication with MCU
- ⚡ 3.3V operation (requires stable 3.3V supply)
- 🌐 Enables WiFi connectivity for IoT and smart projects
- 📶 Supports Station / Access Point modes
- 🧩 Ideal for wireless sensors, switches, and automation
- 🛠️ Programmable via USB-to-Serial adapter (ESP-01 programmer)
- ✅ Compact, low-cost solution for adding WiFi to projects
ESP-01S 5V WiFi Relay Module for Smart Home Control
65,00 EGP- ESP8266 wifi module onboard; in AP mode, it can connect to 5 clients simultaneously.
- Operating Method: Using an APP, a cellphone connected to a wifi module on the same router may operate the relay.
- Diode effusion protection.
- Short response time
ESP32 38Pin MICRO
420,00 EGP2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applications
ESP32 Development Board 38 pin WIFI – Bluetooth (Type C)
420,00 EGP-
Dual-Core ESP32 Processor with WiFi and Bluetooth support
-
38 GPIO Pins for versatile connectivity
-
Type-C USB Port for fast and reliable power/data
-
Built-in Flash & Antenna for wireless applications
-
Ideal for IoT, Smart Devices, and Embedded Projects
ESP32 Type-C 30Pin Development Board (Wi-Fi Bluetooth)
360,00 EGP- Dual-core 32-bit processor (up to 240 MHz)
- Integrated Wi-Fi (2.4 GHz) & Bluetooth (v4.2 BLE)
- USB Type-C interface for power & programming
- 30 GPIO pins with multiple peripheral functions
- Supports Arduino IDE, MicroPython, ESP-IDF
- 4 MB Flash memory for large applications
- On-board voltage regulator (5 V → 3.3 V)
- Compact design with reset and boot buttons
ESP32-CAM-WROVER Dual-Core WiFi Module with Camera
700,00 EGP- Built-in ESP32 Dual-Core WiFi + Bluetooth
- Includes OV2640 2MP Camera
- Supports image streaming & face detection
- Ultra-low-power design
- No microSD card slot
- Compatible with Arduino IDE & ESP-IDF
- Ideal for IoT, AI vision, and surveillance projects
ESP8266 NodeMCU CP2102 Board
Original price was: 275,00 EGP.220,00 EGPCurrent price is: 220,00 EGP.- ESP8266 Wi-Fi microcontroller with 4MB flash
- Built-in CP2102 USB-to-serial converter
- Supports Arduino IDE and Lua scripting
- 3.3V logic with onboard voltage regulator
- Multiple GPIO pins with PWM, I2C, SPI
- Compact and easy to program via USB
GSM/GPRS/3G PCB Antenna with IPEX Connector (15cm, 3dBi) for SIM800/Sim908/Sim900 (1520)
40,00 EGP- Name: 2G 3G IPEX antenna
- Connector type: ipx13
- Gain definition: 3dBi (Typical)
- Frequency band definition: 1710
2170MHz 800960 - Impedance definition: 50 ohm
- Total length: as shown in Figure
- Impedance 50 Ohm
HC-05 Bluetooth Module with 6 Pins and Integrated Button
Original price was: 250,00 EGP.225,00 EGPCurrent price is: 225,00 EGP.- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module
340,00 EGP- Bluetooth 4.0 BLE, TI CC2541 chip
- Supports master and slave modes
- UART interface with configurable baud rate via AT commands
- Wireless range up to 60 meters
- Built-in PCB antenna
- Fast connection interval (20 ms default)
- Supports 2-channel 14-bit ADC and 4-channel PWM outputs
- Anti-hijack password security
- Ultra-low power consumption with standby mode
- Transparent serial data transmission, no extra MCU needed
HX1838 VS1838 NEC Infrared IR Remote Control Sensor Module For Arduino
60,00 EGP- Crystal: the oscillation frequency of 455.
- Button: free height is less than 3mm, the force 200-350g, the life of more than 200 000.
- Photo-detector and preamplifier in one package.
- Internal filter for PCM frequency.
- Improved shielding against EMI.
- Don’t forget to add CR2025 Battery to your Cart as this remote does not come with a battery
NEO-6M GPS Module with EPROM
500,00 EGP- Based on u-blox NEO-6M GPS chip
- Tracks up to 22 satellites on 50 channels
- High sensitivity: -161 dBm, low power: 45mA
- Built-in 25x25mm ceramic patch antenna
- Default baud rate: 9600
- EEPROM for saving settings & backup battery for faster lock
- TTL UART Interface: TX, RX, VCC, GND
- Supports GPS functions: Position hold, Return-to-Home, Waypoints
- Cold start: 38s, Hot start: 1s
- Compact: 30mm x 23mm module, 3mm mounting holes
- Ideal for drones, robots, navigation projects
NEO-M8N GPS Module with Ceramic Active Antenna
800,00 EGP- 📡 NEO-M8N GPS module with ceramic active antenna
- 🛰️ High-sensitivity positioning for fast, stable GPS lock
- 📍 Provides accurate location, speed, and time data
- 🔌 UART interface (and I2C/SPI depending on board)
- 🧩 Ideal for drones, robotics, trackers, and navigation projects
- ⚡ Works with common microcontrollers and flight controllers
- 📦 Compact module—easy to mount and integrate
- ✅ Great choice for outdoor positioning and timing applications
NRF24L01 Wireless Module With Antenna
325,00 EGP- 2.4GHz transceiver for wireless data
- Long range with external antenna
- Low power, SPI interface
- Ideal for IoT, Arduino, wireless sensors
Raspberry Pi 4 Night Vision Fisheye Camera Set 5MP OV5647 160° Adjustable Lens
734,53 EGP- 5MP OV5647 Sensor for high-resolution image capture
- 160° Wide-Angle Fisheye Lens for broad field of view
- Infrared Night Vision with dual IR LEDs for low-light performance
- Adjustable Focus Lens for clear and sharp imaging
- Compatible with Raspberry Pi 4 and other Pi models
SIM800L Quad-Band GPRS GSM Module with Antenna
310,00 EGP-
Quad-band GSM/GPRS module (850/900/1800/1900 MHz)
-
Low power consumption with sleep mode (~1mA)
-
Supports voice, SMS, and GPRS data
-
UART interface with AT command set
-
Compact size with antenna connector
-
Suitable for IoT and embedded applications
