Shop
9V 10cm Battery Connector
5,00 EGP- Hard leather construction with fine workmanship
- Red and black wires to prevent polarity mistakes
- 10 cm cable length for flexible connections
- Prevents short circuits and ensures reliable power delivery
- Snap-on connector for quick battery attachment/detachment
A2212 1000KV Brushless Motor Kit – Efficient Power for RC Aircraft & DIY Projects
400,00 EGP-
1000KV Rating: Balanced RPM for stable, efficient flight
-
Complete Kit: Includes motor, X-mount, prop adapter, and screws
-
Lightweight: Weighs ~50g, perfect for park flyers and gliders
-
Durable Build: Features ball bearings, strong magnets, and quality windings
-
Easy Setup: Pre-soldered 3.5mm connectors for plug-and-play
-
Versatile Use: Ideal for RC planes, drones, gliders, and robotics
-
Budget-Friendly: Great value for beginners and DIY projects
A4988 Stepper Motor Driver
75,00 EGP- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
AC/DC Power Adapter (5V 1A)
50,00 EGP- Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz.
- Input current (mA): 100.
- Output Power: 5V 1A.
- Input Plug: 2-Pin EU type.
- Output Plug: 5.5mm DC plug.
ADC0808CCN PDIP-28 Analog to Digital Converter-ADC
Original price was: 150,00 EGP.120,00 EGPCurrent price is: 120,00 EGP.✅ 8-bit ADC with 8 input channels
✅ Parallel 8-bit digital output
✅ Single +5V power supply operation
✅ Fast conversion (~100 µs)
✅ Standard 28-pin PDIP package
AHT10 High Precision Digital Temperature And Humidity Measurement Module
180,00 EGP- Interface type: I2C
- Working voltage: 1.8 – 6.0 V
- Interface size: 4*2.54mm pitch
- Humidity accuracy: typical ± 2%
- Humidity resolution: 0.024%
- Temperature accuracy: typical ± 0.3 ° C
Ai Thinker ESP32-CAM WiFi + Bluetooth Development Board with OV2640 Camera Module
650,00 EGP- Dual-core ESP32-WROOM-32 processor (up to 240 MHz)
- WiFi 802.11 b/g/n + Bluetooth 4.2 (BLE + BR/EDR)
- OV2640 2MP camera module
- Supports microSD card up to 32 GB
- Multiple GPIOs for sensors and peripherals
- Compact design, low power consumption
AMS1117 3.3V Power Module 800mA
20,00 EGP-
Regulated 3.3 V Output ideal for powering sensors and microcontrollers
-
800 mA Maximum Current suitable for moderate-load electronics
-
Onboard Capacitors for stable voltage with minimal ripple
-
Compact PCB Module easy to integrate into DIY circuits
-
Standard Input Range supports up to ~12 V input voltage
Analog PH Sensor Kit
1.800,00 EGP- Module power supply: 5 VDC.
- Measuring temperature: 0-50 ℃.
- Response time: ≤ 1min.
- pH sensor with BNC connector.
- Gain adjustment Potentiometer.
- Power indicator LED.
Arduino mega 2560 ATmega2560-16AU Board
1.400,00 EGP✅ 54 Digital I/O pins with 15 PWM
✅ 4 UARTs and 16 analog inputs
✅ 256 KB Flash, 8 KB SRAM, 4 KB EEPROM
✅ 100% Arduino IDE compatible
✅ Perfect for large-scale embedded projects
Arduino MEGA 2560 R3 with CH340 Chip
Original price was: 1.250,00 EGP.1.200,00 EGPCurrent price is: 1.200,00 EGP.- Programmer: CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by bootloader
Arduino Nano 3.0 Controller Board – FT232
290,00 EGP- Based on ATmega328 microcontroller
- FT232 USB-to-Serial driver for stable PC communication
- Compact and breadboard-friendly design
- 22 total I/O pins (14 Digital, 8 Analog)
- Supports serial, I2C, and SPI communication
- Onboard voltage regulator (5V & 3.3V)
- Preloaded with Arduino bootloader for easy programming
- Ideal for IoT, robotics, sensors, and embedded systems
Arduino Nano Cable – USB 2.0 A to USB 2.0 Mini B
20,00 EGP- Compatible with Arduino Nano V3 (Mini USB port)
- USB 2.0 A to Mini-B 5-pin connector
- Supports data transfer rates up to 480 Mbps
- Compact 30cm length – perfect for desktop setups
- Plug-and-play; no drivers needed
Arduino Nano Type-C USB
250,00 EGP- Model Name/Number Arduino NANO
- Memory 32 KB of Which 2 KB Used By Bootloader
- Processor ATmega328
- USB 2.0 Ports Mini USB
- No. Of Cores Single
- Digital I/O Pin 22
- Weight 7g
Arduino Nano V3.0 CH340 Chip Board，Atmega328P
Original price was: 250,00 EGP.210,00 EGPCurrent price is: 210,00 EGP.- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Arduino UNO R3 CH340G ATMega328P
330,00 EGP- ATmega328 SMD microcontroller with Arduino bootloader
- Operating voltage: 5V; input 7-12V recommended
- 14 digital I/O pins (6 PWM), 6 analog inputs
- 32 KB Flash memory, 16 MHz clock speed
- CH340 USB-to-serial interface (driver may be needed)
- Fully compatible with Arduino IDE and libraries
- Includes USB cable for easy programming
Arduino Uno R3 Without Cable
440,00 EGP- ✅ ATmega328P microcontroller
✅ 14 digital and 6 analog I/O pins
✅ USB programming interface (USB cable sold separately)
✅ Compatible with Arduino IDE and shields
✅ Ideal for beginners and hobbyists
Arduino UNO R4 Minima
Original price was: 850,00 EGP.750,00 EGPCurrent price is: 750,00 EGP.- Same form factor as UNO R3
- Extra onboard peripherals
- Inbuilt HID Support
- Expanded Memory and Faster Clock Speed than before
Arduino UNO R4 WiFi
Original price was: 1.400,00 EGP.1.100,00 EGPCurrent price is: 1.100,00 EGP.- Same form factor as UNO R3
- Inbuilt Wi-Fi and Bluetooth
- Onboard 12×8 LED Matrix
- Extra onboard peripherals
- Inbuilt HID Support
- Expanded Memory and Faster Clock Speed than before
