Shop
Brand
4 Position DIP Switch
6,50 EGP- 4 Independent Switches: Allows up to 16 ON/OFF configuration combinations.
- Compact Size: Ideal for space-constrained electronic projects.
- Manual Toggle Control: Simple, tool-free operation.
- Reliable Contacts: Low contact resistance for stable performance.
- Voltage & Current Rating: Up to 24V DC, 0.1–1A depending on model.
- Mounting Type: Through-hole or surface mount.
- Durable Build: Made of high-quality plastic and metal for long-term use.
- Applications: Used in embedded systems, robotics, DIY electronics, and device configuration.
4-Channel Bi-directional Logic Level Converter
40,00 EGP- 🔁 4-channel bi-directional logic level shifting
- ⚡ Converts between 3.3V ↔ 5V signals (HV/LV rails)
- 🧩 Perfect for I2C, UART, SPI, and GPIO lines
- 🔌 Simple wiring: LV, HV, GND + 4 signal channels
- 📡 Enables 3.3V sensors to work with 5V microcontrollers
- 🛡️ Helps protect low-voltage devices from over-voltage
- 📦 Compact module for breadboard and prototyping use
- 🛠️ Ideal for Arduino, ESP32, Raspberry Pi, and STM32 projects
4.7k ohm 1/4 Watt
0,25 EGP✅ 4.7K ohm resistor
✅ 0.25 watt power rating
✅ Through-hole axial leaded package
✅ Suitable for low-power electronics
4.7uF 50V Radial Electrolytic Capacitor
1,00 EGP- ⚡ 4.7µF radial electrolytic capacitor
- 🔋 Rated voltage: 50V for reliable DC filtering
- 🧩 Ideal for power smoothing, decoupling, and timing circuits
- 🛠️ Through-hole radial leads—easy soldering on PCBs
- 📈 Helps reduce ripple and noise in power lines
- 📦 Compact size for general electronics projects
- 🔧 Common choice for repairs and prototyping
- ✅ Suitable for Arduino/analog/power supply circuits
4×4 Matrix Keypad
35,00 EGP- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 12 DC
400KV Step Up Power Module
200,00 EGPInput Voltage: DC3.6V-6V
Input Current: 2A-5A
Output Voltage: DC 400KV (Please pay attention to safety when used)
Input Line Length: about 100mm (red is positive)
Output Line Length: about 160mm
433MHz HC-12 Wireless Serial Port Module (1000m Range)
275,00 EGP- Compact, low-power 433MHz RF transceiver.
- Transparent TTL UART (serial) interface — plug & play.
- Long range: up to 1000 m line-of-sight (with suitable antenna).
- Configurable via AT commands (baud rate, channel, power, mode).
- Wide operating voltage for direct microcontroller connection.
- Low standby/operating current — suitable for battery systems.
- Reliable data link for telemetry, remote control, and sensor networks.
470 ohm 1/4 Watt (4pcs)
0,25 EGP- 🧰 Resistor set: 470Ω (1/4W) – 4 pieces
- ⚡ Power rating: 0.25W for general-purpose electronics
- 💡 Great for LED current limiting and indicator circuits
- 🧩 Useful for pull-up/pull-down and signal conditioning
- 🛠️ Through-hole type—easy breadboarding and soldering
- 📦 Pack of 4 pieces—handy for DIY and repairs
- 🔧 Common value for Arduino and prototyping projects
- ✅ Reliable resistors for everyday circuit building
470uF 35V Radial Electrolytic Capacitor
3,00 EGP- ⚡ 470µF radial electrolytic capacitor
- 🔋 Rated voltage: 35V for power filtering and smoothing
- 🧩 Ideal for DC power supplies, amplifiers, and motor circuits
- 🛠️ Through-hole radial leads for easy PCB soldering
- 📈 Helps reduce ripple, noise, and voltage dips
- 📦 Common value for repairs and electronics prototyping
- 🔧 Suitable for decoupling and bulk energy storage
- ✅ Great for Arduino and general electronics projects
47uF 50V Radial Electrolytic Capacitor
1,25 EGP- ⚡ 47µF radial electrolytic capacitor
- 🔋 Rated voltage: 50V for reliable power filtering
- 🧩 Ideal for smoothing, decoupling, and timing circuits
- 🛠️ Through-hole radial leads for easy PCB soldering
- 📈 Helps reduce ripple, noise, and voltage fluctuations
- 📦 Common value for repairs and prototyping
- 🔧 Suitable for power supplies, amplifiers, and control boards
- ✅ Great for general electronics and DIY projects
4PIN IR Infrared Flame Detection Sensor Module
35,00 EGP✅ Compact 4-pin module with digital & analog output
✅ Adjustable sensitivity for varied flame sizes
✅ Compatible with Arduino, Raspberry Pi, and similar boards
✅ Fast and reliable flame detection
