Shop
Brand
ADC0808CCN PDIP-28 Analog to Digital Converter-ADC
Original price was: 150,00 EGP.120,00 EGPCurrent price is: 120,00 EGP.✅ 8-bit ADC with 8 input channels
✅ Parallel 8-bit digital output
✅ Single +5V power supply operation
✅ Fast conversion (~100 µs)
✅ Standard 28-pin PDIP package
ADS1115 16-Bit I2C ADC Module – 4 Channel
275,00 EGP- 16-bit high-precision ADC
- 4 analog input channels
- I2C communication interface
- Programmable gain amplifier
- Low power consumption
- Supports single-ended & differential inputs
- Compatible with Arduino & Raspberry Pi
AHT10 High Precision Digital Temperature And Humidity Measurement Module
180,00 EGP- Interface type: I2C
- Working voltage: 1.8 – 6.0 V
- Interface size: 4*2.54mm pitch
- Humidity accuracy: typical ± 2%
- Humidity resolution: 0.024%
- Temperature accuracy: typical ± 0.3 ° C
Ai Thinker ESP32 CAM Development Board WiFi+Bluetooth with OV3660 Camera Module
650,00 EGP- Dual-core ESP32-WROOM-32 processor (up to 240 MHz)
- WiFi 802.11 b/g/n + Bluetooth 4.2 (BLE + BR/EDR)
- OV2640 2MP camera module
- Supports microSD card up to 32 GB
- Multiple GPIOs for sensors and peripherals
- Compact design, low power consumption
All Purpose Hot Melt Glue Sticks for Glue Gun
10,00 EGP- 🧴 All-purpose hot melt glue sticks for glue guns
- 🔥 Fast melting for quick bonding and repairs
- 🧩 Works on wood, plastic, paper, fabric, and crafts
- 🛠️ Ideal for DIY, packaging, decorations, and home fixes
- 💪 Strong adhesion with clean, solid hold
- ⏳ Quick set time—reduces waiting أثناء الشغل
- 📦 Easy to store and use—perfect refill sticks
- ✅ Compatible with most standard hot glue guns
AMS1117 3.3V Voltage Regulator Power Module – 800mA Output for Arduino & Microcontrollers
20,00 EGP-
Regulated 3.3 V Output ideal for powering sensors and microcontrollers
-
800 mA Maximum Current suitable for moderate-load electronics
-
Onboard Capacitors for stable voltage with minimal ripple
-
Compact PCB Module easy to integrate into DIY circuits
-
Standard Input Range supports up to ~12 V input voltage
Analog PH Sensor Kit
1.800,00 EGP- Module power supply: 5 VDC.
- Measuring temperature: 0-50 ℃.
- Response time: ≤ 1min.
- pH sensor with BNC connector.
- Gain adjustment Potentiometer.
- Power indicator LED.
Arduino mega 2560 ATmega2560-16AU Board
1.500,00 EGP✅ 54 Digital I/O pins with 15 PWM
✅ 4 UARTs and 16 analog inputs
✅ 256 KB Flash, 8 KB SRAM, 4 KB EEPROM
✅ 100% Arduino IDE compatible
✅ Perfect for large-scale embedded projects
Arduino MEGA 2560 R3 with CH340 Chip
Original price was: 1.450,00 EGP.1.200,00 EGPCurrent price is: 1.200,00 EGP.- Programmer: CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by bootloader
Arduino Nano 3.0 Controller Board – FT232
290,00 EGP- Based on ATmega328 microcontroller
- FT232 USB-to-Serial driver for stable PC communication
- Compact and breadboard-friendly design
- 22 total I/O pins (14 Digital, 8 Analog)
- Supports serial, I2C, and SPI communication
- Onboard voltage regulator (5V & 3.3V)
- Preloaded with Arduino bootloader for easy programming
- Ideal for IoT, robotics, sensors, and embedded systems
Arduino Nano Cable – USB 2.0 A to USB 2.0 Mini B
20,00 EGP- Compatible with Arduino Nano V3 (Mini USB port)
- USB 2.0 A to Mini-B 5-pin connector
- Supports data transfer rates up to 480 Mbps
- Compact 30cm length – perfect for desktop setups
- Plug-and-play; no drivers needed
