Shop
DS18B20 Temperature Sensor
45,00 EGP- Digital temperature sensor with 1-wire interface
- Measures temperatures from –55°C to +125°C
- High accuracy ±0.5°C over a wide range
- Requires only one data line for communication
- Can connect multiple sensors on a single bus
- Waterproof versions available for outdoor use
- Compatible with Arduino, Raspberry Pi, and other microcontrollers
DS18B20 Water Proof Temperature Probe – Black (1m)
80,00 EGP- A probe by new original installation import DS18B20 temperature sensor chip.
- Stainless steel tube encapsulation waterproof moistureproof prevents rust.
- Stainless steel shell (6 * 45 mm), lead length 100 mm (shielding wire) use stability;
- 3.0 V-5.5 V power supply;
- Temperature range wide: -55 ℃ ~ + 125 ℃;
- Without the external components, the unique single bus.
DS428 ON/OFF Push Button Switch Self-Lock 2Pin 12mm RED
10,00 EGP- 🔴 DS428 red push button switch (12mm panel mount)
- 🔒 Self-lock / latching ON-OFF operation
- 🔌 2-pin design for quick, simple wiring
- 🛠️ Fits standard 12mm mounting hole—easy to install
- ⚡ Great for power toggles, control panels, DIY projects
- 📦 Compact body for small enclosures
- 💪 Durable button feel with stable switching
- ✅ Ideal for DC circuits, indicators, and small devices
DT-830 Digital Multimeter – AC/DC Voltage, Current & Resistance Tester
175,00 EGP- AC / DC Voltage Measurement
- DC Current & Resistance Testing
- Clear Digital LCD Display
- Continuity & Diode Test
- Compact & Portable Design
- Easy Rotary Switch Operation
- Ideal for DIY & Electrical Work
dt-9205a digital multimeter
300,00 EGP- 📟 DT-9205A digital multimeter for everyday measurements
- ⚡ Measures voltage (AC/DC), current, and resistance
- 🔔 Continuity buzzer + diode testing for quick checks
- 🔍 Useful functions like hFE transistor test (model dependent)
- 🧩 Ideal for electronics, DIY repairs, and workshop use
- 🛡️ Overload protection for safer operation
- 📦 Large display with easy-to-use rotary selector
- ✅ Great budget meter for students and technicians
Dual-Speed Encoder with Pulse Output
250,00 EGP- Working voltage: 4.5V to 5.5 V
- Transmit tube pressure drop: Vf = 1.6 V
- Transmit tube current: 20 mA
- Distinguish precision: 0.01 mm
- Measurement frequency, 100 kHz
E18-D80NK Adjustable Infrared Sensor Switch 3-80cm
275,00 EGP- Adjustable sensing range: 3 cm to 80 cm
- Digital NPN output (normally open)
- Operates at 5V DC with low current consumption
- Fast response time (<2 ms)
- Compact and easy to install
- Ideal for obstacle detection and automation applications
Electromagnet Solenoid Lock 10mm 12V 600mA
300,00 EGP- 10mm Stroke Length: Retracts pin when powered
- 12V DC Operation: Low-power with 600mA current draw
- Strong Holding Force: Ideal for electronic door locks
- Durable Metal Build: Reliable for cabinets, lockers, and access systems
- Quick Response: Fast locking/unlocking for automation projects
Electromagnet Solenoid Lock 5mm 12VDC 350mA
220,00 EGP- 🔒 12VDC solenoid lock / electromagnet latch
- ⚡ Current draw: ~350mA (5mm stroke)
- 🔁 Push/pull action for locking and release mechanisms
- 🧩 Ideal for cabinets, access control, and DIY lock projects
- 🛠️ Easy to control using relay or MOSFET driver
- 💪 Strong holding force for compact size
- 📦 Compact design—fits inside small enclosures
- ✅ Great for Arduino/ESP32 smart lock applications
ESC (Speed Controller for Brushless Motor) 30A with Bare Wires
450,00 EGP-
30A Current Rating for medium-power brushless motors
-
Supports 2S–4S LiPo Batteries (typically 7.4V–14.8V)
-
Bare Wire Connections for flexible wiring and soldering
-
High-Speed Response for smooth throttle control
-
Compact & Lightweight ideal for drones, RC planes, and DIY robotics
ESC 30A Brushless Speed Controller
475,00 EGP-
30A continuous / 40A burst current
-
Supports 2–4S LiPo or 5–12 cell NiMH/NiCd
-
Built-in 5V/2A BEC
-
Pre-soldered T-type (Deans) and 3.5mm bullet connectors
-
Programmable brake, timing, and voltage cutoff
-
Overheat, signal loss, and low voltage protection
-
Smooth throttle response and easy calibration
ESP-01 ESP8266 Serial WiFi Module
110,00 EGP- 📡 ESP-01 module based on ESP8266 WiFi SoC
- 🔌 UART serial interface for easy communication with MCU
- ⚡ 3.3V operation (requires stable 3.3V supply)
- 🌐 Enables WiFi connectivity for IoT and smart projects
- 📶 Supports Station / Access Point modes
- 🧩 Ideal for wireless sensors, switches, and automation
- 🛠️ Programmable via USB-to-Serial adapter (ESP-01 programmer)
- ✅ Compact, low-cost solution for adding WiFi to projects
ESP-01S 5V WiFi Relay Module for Smart Home Control
65,00 EGP- ESP8266 wifi module onboard; in AP mode, it can connect to 5 clients simultaneously.
- Operating Method: Using an APP, a cellphone connected to a wifi module on the same router may operate the relay.
- Diode effusion protection.
- Short response time
ESP32 30Pin Development Board (Wi-Fi Bluetooth) USB Micro
350,00 EGP- 📡 ESP32 30-pin development board with Wi-Fi + Bluetooth
- 🔌 Micro-USB for power and programming
- 🧩 30-pin header layout—easy breadboard/prototyping
- ⚡ Powerful dual-core MCU for IoT and automation projects
- 🚌 Supports GPIO / ADC / PWM / I2C / SPI / UART
- 🔋 Low-power modes for battery-based applications
- 🛠️ Compatible with Arduino IDE, ESP-IDF, and MicroPython
- ✅ Great for smart home, sensors, and wireless control
ESP32 38Pin MICRO
420,00 EGP2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applications
ESP32 D1 Mini – Dual Core WiFi Bluetooth Module
350,00 EGP- Dual-core ESP32 @ 240MHz
- Built-in WiFi (802.11 b/g/n) + Bluetooth 4.2
- Compact D1 Mini form factor
- 4MB Flash memory
- Supports Arduino IDE and MicroPython
ESP32 Development Board 38 pin WIFI – Bluetooth (Type C)
420,00 EGP-
Dual-Core ESP32 Processor with WiFi and Bluetooth support
-
38 GPIO Pins for versatile connectivity
-
Type-C USB Port for fast and reliable power/data
-
Built-in Flash & Antenna for wireless applications
-
Ideal for IoT, Smart Devices, and Embedded Projects
ESP32 Type-C 30Pin Development Board (Wi-Fi Bluetooth)
360,00 EGP- Dual-core 32-bit processor (up to 240 MHz)
- Integrated Wi-Fi (2.4 GHz) & Bluetooth (v4.2 BLE)
- USB Type-C interface for power & programming
- 30 GPIO pins with multiple peripheral functions
- Supports Arduino IDE, MicroPython, ESP-IDF
- 4 MB Flash memory for large applications
- On-board voltage regulator (5 V → 3.3 V)
- Compact design with reset and boot buttons
ESP32-C3 SuperMini Development Board – Wi-Fi & Bluetooth 5.0 Microcontroller for IoT & Embedded Projects
350,00 EGP- 📡 ESP32-C3 SuperMini dev board with Wi-Fi + Bluetooth 5.0
- 📦 Ultra-compact size—perfect for space-limited builds
- ⚡ Low power operation for battery-based IoT nodes
- 🧠 RISC-V MCU performance for smart embedded applications
- 🔌 USB interface for easy programming and power
- 🚌 Supports GPIO / PWM / ADC / I2C / SPI / UART
- 🛠️ Compatible with Arduino IDE, ESP-IDF, and MicroPython
- ✅ Ideal for smart home, sensors, automation, and wireless control
