Arduino Uno R3 with ch340

<div class=""page-container show_breadcrumb_v1""> <div id=""main-content"" class=""ts-col-18""> <div id=""primary"" class=""site-content""> <div id=""product-378170"" class=""product type-product post-378170 status-publish first outofstock product_cat-arduino-boards product_tag-arduino-uno product_tag-ch340 product_tag-r3 product_tag-rev3 has-post-thumbnail shipping-taxable purchasable product-type-simple""> <div class=""woocommerce-tabs wc-tabs-wrapper""> <div id=""tab-description"" class=""woocommerce-Tabs-panel woocommerce-Tabs-panel–description panel entry-content wc-tab"" role=""tabpanel"" aria-labelledby=""tab-title-description""> <div class=""product-content ""> <h5><strong>Key Features of UNO R3:</strong></h5> <ul> <li>ATmega328 processor running at 16MHz</li> <li>CH340 Serial to USB converter</li> <li>32KB Flash memory</li> <li>14 Digital I/O</li> <li>6 PWM shared with the digital I/O</li> <li>6 Analog inputs that can also be used as digital I/O for a total of up to 20 digital I/O</li> <li>1 Hardware serial port</li> <li>5V Operation</li> </ul> <p>The Uno R3 operates at 5V which can be supplied via an external power supply or through the USB port connection. The power source is selected automatically if both are available. If an external supply is used, it is recommended to use a supply between 7-12V. Higher input voltages will cause the on-board regulator to work harder and may cause it to overheat. Our 7.5V AC adapter works extremely well for powering these boards.</p> <p>The attached board pin-out shows the most commonly used functions for the pins, but some pins can support other functions. Refer the the Arduino documentation for all possible functions for the pins.</p> <p>This is Uno design which uses a DIP processor placed in a socket. The benefit to this design is that it is easy to replace the processor should the chip become damaged, but it does cost more than the SMD version that we also sell.</p> <p>The board uses the CH340 chip for USB communications. If you have any issues with connecting to the board, you may need to download a driver.  Just search for Arduino CH340 driver and you will find a number of sources for drivers depending on what Windows or Mac operating system you are using.</p> <h5>Technical Specifications</h5> <table class=""table table-hover"" width=""583""> <tbody> <tr> <td width=""319"">Microcontroller</td> <td width=""192"">ATmega328P</td> </tr> <tr> <td width=""319"">Serial to USB Converter</td> <td width=""192"">CH340</td> </tr> <tr> <td width=""319"">Operating Voltage</td> <td width=""192"">5V</td> </tr> <tr> <td width=""319"">Input Voltage</td> <td width=""192"">7-12V</td> </tr> <tr> <td width=""319"">Digital I/O Pins</td> <td width=""192"">14</td> </tr> <tr> <td width=""319"">PWM I/O Pins (Shared with Digital I/O)</td> <td width=""192"">6</td> </tr> <tr> <td width=""319"">Analog Input Pins</td> <td width=""192"">6</td> </tr> <tr> <td width=""319"">DC Current per I/O Pin</td> <td width=""192"">20mA</td> </tr> <tr> <td width=""319"">DC Current which can be drawn from 3.3V Pin</td> <td width=""192"">50mA</td> </tr> <tr> <td width=""319"">Flash Memory</td> <td width=""192"">32 KBytes</td> </tr> <tr> <td width=""319"">SRAM</td> <td width=""192"">2 KBytes</td> </tr> <tr> <td width=""319"">EEPROM</td> <td width=""192"">1 KBytes</td> </tr> <tr> <td width=""319"">Clock Speed</td> <td width=""192"">16MHz</td> </tr> <tr> <td width=""319"">Built-in LED</td> <td width=""192"">Attached to digital I/O Pin 13</td> </tr> <tr> <td width=""319"">USB Connector Style</td> <td width=""192"">B-Type Female</td> </tr> <tr> <td width=""319"">Board Dimensions (PCB)</td> <td width=""192"">68.8 x 53.4mm (2.7 x 2.1″)</td> </tr> <tr> <td width=""319"">Board Dimensions (with connector overhang)</td> <td width=""192"">77 x 53.4mm  (3 x 2.1″)</td> </tr> <tr> <td width=""319"">Mfr</td> <td width=""192"">China</td> </tr> </tbody> </table> <p><img class=""aligncenter size-full wp-image-378189 jetpack-lazy-image jetpack-lazy-image–handled"" src=""https://i0.wp.com/makerselectronics.com/wp-content/uploads/2023/09/UNOR3-CH340-004-1.jpg?resize=906671&ssl=1"" alt="""" width=""906"" height=""671"" loading=""eager"" data-attachment-id=""378189"" data-permalink=""https://makerselectronics.com/?attachment_id=378189"" data-orig-file=""https://i0.wp.com/makerselectronics.com/wp-content/uploads/2023/09/UNOR3-CH340-004-1-906×671.jpg?fit=906671&ssl=1"" data-orig-size=""906, 671"" data-comments-opened=""1"" data-image-meta=""{""aperture"":""0"", ""credit"":"""", ""camera"":"""", ""caption"":"""", ""created_timestamp"":""0"", ""copyright"":"""", ""focal_length"":""0"", ""iso"":""0"", ""shutter_speed"":""0"", ""title"":"""", ""orientation"":""1""}"" data-image-title=""UNOR3-CH340-004 (1)"" data-image-description="""" data-image-caption="""" data-medium-file=""https://i0.wp.com/makerselectronics.com/wp-content/uploads/2023/09/UNOR3-CH340-004-1-906×671.jpg?fit=300222&ssl=1"" data-large-file=""https://i0.wp.com/makerselectronics.com/wp-content/uploads/2023/09/UNOR3-CH340-004-1-906×671.jpg?fit=906671&ssl=1"" data-recalc-dims=""1"" data-lazy-loaded=""1"" /></p> </div> </div> </div> </div> </div> </div> </div> <div class=""related-upsells-products-wrapper""> <div class=""container""> </div> </div>