Shop
ESP32-S3-N16R8 Advanced Development Board with Integrated WiFi/Bluetooth
550,00 EGP- 📡 ESP32-S3 dev board with built-in WiFi + Bluetooth
- 🧠 N16R8 memory: 16MB Flash + 8MB PSRAM for heavy projects
- ⚡ Powerful dual-core performance for IoT and edge apps
- 🔌 USB support for programming + native USB features
- 🧩 Great for AI/ML, audio, display, and camera applications
- 🚌 Supports I2C / SPI / UART / GPIO for sensor expansion
- 🔋 Low-power modes for battery-powered designs
- ✅ Ideal for advanced Arduino/ESP-IDF/MicroPython projects
ESP8266 NodeMCU CP2102 Board
Original price was: 275,00 EGP.220,00 EGPCurrent price is: 220,00 EGP.- ESP8266 Wi-Fi microcontroller with 4MB flash
- Built-in CP2102 USB-to-serial converter
- Supports Arduino IDE and Lua scripting
- 3.3V logic with onboard voltage regulator
- Multiple GPIO pins with PWM, I2C, SPI
- Compact and easy to program via USB
Essential Components List for Learning Digital Logic Circuits
96,00 EGP
|
MB102 830 Points breadboard
In stock |
45,00 EGP
|
|---|---|
|
20cm Male-to-Male Jumper Wires
In stock |
1,00 EGP
|
|
Varta 9V battery
In stock |
50,00 EGP
|
96,00 EGP
In stock
Etching Solution Acid (125mL)
40,00 EGP-
Ready-to-use etching acid for copper-clad PCB boards
-
Delivers clean and effective copper removal
-
Suitable for DIY electronics, prototyping, and metal etching
-
Compact 125mL sealed plastic bottle
-
Easy to handle and store with proper safety precautions
-
Also usable for artistic metal etching applications
EU Power Cable For PC Computer Monitor Printer
25,00 EGP-
Standard EU Plug compatible with European outlets
-
3-Pin Connector (C13) fits most PCs, monitors, and printers
-
Durable & Insulated Cable for safe and reliable power delivery
-
1.2–1.5 Meter Length (varies by model) for flexible setup
-
Ideal for Home, Office, and IT Equipment Use
F/F – 10cm Female to Female 1 Jumper Wire
0,75 EGP- Female-to-Female connectors – compatible with 2.54mm male headers
- Length: 10cm – compact and flexible for tight spaces
- Ideal for breadboards and dev boards – Arduino, Raspberry Pi, sensors, modules
- Durable build – copper conductor with strong PVC insulation
- Plug-and-play convenience – no soldering needed
- Reusable and flexible – perfect for rapid prototyping
- Secure grip – solid crimp for reliable connectivity
- Versatile use – great for DIY kits, testing, and learning electronics
F/F – 30cm Female to Female 1 Jumper Wire
1,50 EGP- 📏 Extended 30cm length – perfect for spaced-out circuits
- 🔗 Female-to-Female connectors – fits standard 2.54mm male headers
- ⚙️ Ideal for Arduino, Raspberry Pi, and breadboards
- 🔁 Durable, reusable, and easy to connect – no soldering needed
- 🧪 Great for prototyping, testing, and educational use
- 🔋 Flexible PVC insulation with copper conductors
Female 2.1*5.5mm for DC Power Jack Adapter Connector Plug
10,00 EGP- It is a perfect solution for those who want to make custom power cable.
- This CCTV Camera DC Power Connector will provide a great connection.
- The internal diameter of the plug: 2.1mm
- The external diameter of the plug: 5.5mm
Female Banana Plug Short (4 mm) , Black Color
5,00 EGP- 4mm female banana plug
- Compact short design
- Red color for easy identification
- Reliable and durable construction
- Compatible with standard banana jacks
Female Banana Plug Short (4 mm) , Red Color
5,00 EGP- 4mm female banana plug
- Short and compact design
- Red for easy polarity identification
- Durable and reliable for frequent use
- Compatible with standard banana connectors
Flex Sensor 5.6 cm (Detect Bending Motion)
750,00 EGP-
5.6 cm length flexible sensor
-
Resistance varies with bending angle (approx. 10 kΩ flat)
-
Easy to interface with microcontrollers
-
Durable and responsive to motion
-
Ideal for motion and gesture detection
Flux JYD Soldering Paste 150G
25,00 EGP- Strong, clean, and reliable solder joints
- Neutral pH (7 ± 0.3), non-corrosive and safe
- Low-residue formula – no cleaning needed
- Excellent insulation and heat transfer
- Long shelf life – won’t dry out easily
- Ideal for electronics, PCB repair, and fine-pitch soldering
Frequency Adjustable Pulse Generator Module NE555
35,00 EGP- Input Voltage: 5V-15VDC
- Output amplitude: 4.2V V-PP to 11.4V V-PP.
- Output Current : 15mA for 5V & 35mA for 12V.
- Color: Blue
- Working voltage: 5-12V
- Size: 25x 13 x 12 mm (LxWxH)
- Minimum – 50% duty cycle, 3.7 Hz & Maximum – 98% duty cycle, 1.3KHz
FSR402 Round Force Sensor
450,00 EGP-
Force-sensitive resistor – resistance decreases with applied pressure
-
12.7mm round sensing area for compact integration
-
Thin and flexible – fits easily into tight or curved spaces
-
Compatible with analog input on Arduino, Raspberry Pi, ESP32, etc.
-
Detects touch, weight, and pressure from ~0.2N to 20N
-
Fast response time – <1 millisecond activation
FTDI FT232RL USB to TTL Converter Module
155,00 EGP-
Based on reliable FTDI FT232RL chipset
-
Converts USB to 3.3V or 5V TTL serial signals
-
Selectable VCC output (3.3V / 5V) via jumper or solder pads
-
Standard 6-pin interface: DTR, RX, TX, VCC, CTS, GND
-
Supports auto-reset for Arduino boards (via DTR)
-
High-speed data rate up to 3 Mbps
-
Compatible with Windows, macOS, and Linux
-
Integrated USB Type-A / Mini / Micro USB (varies by version)
-
Compact and easy-to-use design
FTDI FT232RL USB to TTL Converter Module TYPE-C USB
150,00 EGP- FT232RL chipset – reliable USB-to-serial communication
- USB Type-C connector – reversible, modern design
- Supports 3.3V / 5V logic (selectable)
- Breakout pins: TX, RX, VCC, GND, CTS, DTR
- Plug-and-play on Windows, macOS, Linux
- Ideal for Arduino, ESP8266/ESP32, STM32
- Perfect for firmware flashing, serial debugging
FunDuino UNO (ATMega 328P board compatible with Arduino Uno) (Arduino Compatible)
650,00 EGP-
ATmega328P Microcontroller fully compatible with Arduino UNO
-
USB Interface (CH340 or FTDI) for easy PC connection
-
14 Digital I/O Pins, 6 Analog Inputs, PWM support
-
Standard Arduino UNO Form Factor for shield compatibility
-
Ideal for Beginners, Prototyping, and Educational Use
Fuse Holder ( External for T5x20 Size)
10,00 EGP- Houses standard 5×20mm glass fuses – supports fast, reliable fuse replacement
- Inline/external design – ideal for DC circuits, automotive, and DIY builds
- Secure screw-lock cap – keeps fuse firmly in place during operation
- Durable plastic body – offers excellent insulation and protection
- Supports up to 10A / 250V – check fuse rating for exact limits
- Easy wiring – solder or crimp terminals for custom installations
General Purpose Relay SPDT (1 Form C) 12VDC Coil 10A Through Hole 5 Pin
15,00 EGP- Type: SPDT (Single Pole Double Throw) / 1 Form C.
- Coil Voltage: 12V DC.
- Contact Rating: 10A @ 250VAC or 30VDC.
- Pins: 5-pin through-hole for PCB mounting.
- Compact Design: ~28 x 12.5 x 15 mm size.
- Fast Response: ≤10 ms operation, ≤5 ms release time.
- Durable: High insulation resistance and reliable performance.
- Versatile Use: Ideal for automotive, industrial, and home automation.
General Purpose Relay SPDT (1 Form C) 24VDC Coil 10A Through Hole 5 Pin
15,00 EGP- 🔁 SPDT relay (1 Form C): NO/NC changeover contact
- ⚡ 24VDC coil for industrial/control circuits
- 💪 High switching capacity: up to 10A
- 🔌 5-pin through-hole package for easy PCB mounting
- 🧩 Ideal for Arduino/PLC control with driver transistor
- 🏠 Switches loads like lamps, motors, solenoids, and pumps
- 🛡️ Provides electrical isolation between control & load
- ✅ Reliable general-purpose relay for automation projects
