Shop
Brand
Multicolor 10 pin Dupont Flat Ribbon Cable (1 Meter)
25,00 EGP-
10 Individual Jumper Leads in a flat, ribbon format with 2.54 mm pitch
-
One-Meter Length for flexible routing in electronics projects
-
Multicolor Wires for easy signal identification and organization
-
Female-to-Female Connectors for quick plug-and-play with headers
-
Compatible with Breadboards & Microcontrollers like Arduino, Raspberry Pi
NEMA 17 Stepper Motor (Used / Fully Tested)
100,00 EGP- Standard NEMA 17 frame for broad compatibility
- 1.8° step angle (200 steps/rev) for precise control
- High torque (~40–50 N·cm, model dependent)
- Bipolar 4-wire design for reliable performance
- Tested & fully functional used unit – minor cosmetic wear
- Ideal for 3D printers, CNC, robotics, and automation
NEO-6M GPS Module with EPROM
500,00 EGP- Based on u-blox NEO-6M GPS chip
- Tracks up to 22 satellites on 50 channels
- High sensitivity: -161 dBm, low power: 45mA
- Built-in 25x25mm ceramic patch antenna
- Default baud rate: 9600
- EEPROM for saving settings & backup battery for faster lock
- TTL UART Interface: TX, RX, VCC, GND
- Supports GPS functions: Position hold, Return-to-Home, Waypoints
- Cold start: 38s, Hot start: 1s
- Compact: 30mm x 23mm module, 3mm mounting holes
- Ideal for drones, robots, navigation projects
NJK-5002C Hall Effect Sensor – NPN NO 3-Wire Magnet | Arduino Compatible
245,00 EGP- NPN Normally Open (NO) magnetic switch
- 3-wire connection: VCC, GND, Output
- Wide voltage range: 4.5V–30V DC
- Built-in LED indicator for magnetic detection
- Fast, non-contact sensing
- Compatible with Arduino and other microcontrollers
- Durable and compact M12 threaded design
NRF24L01 Wireless Module With Antenna
325,00 EGP- 2.4GHz transceiver for wireless data
- Long range with external antenna
- Low power, SPI interface
- Ideal for IoT, Arduino, wireless sensors
ON/OFF PCB Switch (6 Pin)
5,00 EGP- 6-pin configuration for secure PCB mounting
- Slim, compact build ideal for confined layouts
- Durable materials ensure long-lasting operation
- Simple installation across various circuit types
- Perfect for prototypes, gadgets, and home electronics
On/Off Switch Black Rocker 10A Small 12V DC (KDC-08)
5,00 EGP- MPN: KDC-08
- Temperature: -25 to 85 degc
- Rated voltage: 250V
- Rated current: 3A-6A-15A
- contact resistance: <=0.02 ohm
- Insulation resistance: >=100Mohm
- withstand voltage: 1500VAC
- lifetime: 10000 cycles
Optical Dust Sensor with Cable – Smoke
350,00 EGP- Infrared optical sensing for accurate particle detection
- Detects dust, smoke, and pollen in indoor environments
- Fast response time (<1 second) and low power use
- Compact build with lightweight materials
- Plug-and-play with included 5-pin interface cable
- Compatible with Arduino, ESP32, STM32, Raspberry Pi
PAM8403 Digital Audio Amplifier
35,00 EGP- 3W + 3W stereo output for clear sound
- High efficiency Class D amplifier
- Compact size for portable projects
- Low heat generation, no heat sink needed
- Easy integration with simple wiring
- Low power consumption for battery use
- Ideal for DIY audio and speaker systems
PAM8403 Mini 5V Digital Amplifier Board with Switch Potentiometer can be USB Powered
55,00 EGP-
Based on PAM8403 digital audio amplifier chip for high-fidelity stereo output
-
3W + 3W stereo output with low distortion and efficient power usage
-
Built-in rotary potentiometer with switch for easy volume control and power on/off
-
Compact design: 30mm x 22mm PCB size, 16mm height when assembled
-
Upgraded 470µF power filter capacitor for improved audio clarity and stability
-
Suitable for portable, battery-powered, or DIY audio projects
-
Low power operation (5V) – ideal for long-term stable use
⚠️ Note: Supply voltage must be ≤ 5.5V. Reverse polarity will damage the board.
Panasonic 3V Lithium Battery CR1220
22,00 EGP- 🔋 Panasonic 3V lithium coin cell (CR1220)
- ⚡ Stable, reliable power for compact electronics
- 📏 Small size: 12mm × 2.0mm
- 🧠 Ideal for key fobs, watches, calculators, and sensors
- ⏳ Long shelf life—perfect for standby/backup use
- 🛡️ Leak-resistant design for safe storage and performance
- ❄️ Performs well across wide temperature ranges
- ✅ Genuine Panasonic quality for consistent output
Panasonic 3V Lithium Battery CR2016
16,00 EGP- 🔋 Panasonic 3V lithium coin cell (CR2016)
- ⚡ Stable, dependable 3V output for small devices
- 📏 Compact size: 20mm × 1.6mm
- ⏳ Long shelf life—great for standby and backup power
- 🛡️ Leak-resistant design for safer storage and reliability
- 🧠 Ideal for key fobs, remotes, calculators, and sensors
- ❄️ Performs well across wide temperature ranges
- ✅ Genuine Panasonic quality for consistent performance
