Shop

Monocrystalline 110*136mm 12V 200mA Small Solar Cell

450,00 EGP
  1. 12 volt 2-watt poly crystalline solar panel .
  2. High conversion speed, high-efficiency output.
  3. Excellent low light effect.
  4. High transmittance tempered glass.
  5. A unique technique to prevent water frozen within the deforming framework.
  6. Small Epoxy Solar Panels are simple to install or add to your existing product.

Mounting for DC Motor JGA25-370-CE 3D Printed

45,00 EGP
  • Designed for 25mm JGA25-370-CE gear motors

  • High-quality PLA/PETG 3D printed construction

  • Pre-drilled 3mm mounting holes

  • Stable, low-profile design (~20mm height)

  • Easy alignment using motor faceplate and side screws

  • Ideal for robotics, pan-tilt, or DIY mechanical projects

MP3-TF-16P SD Card MP3 Module with Serial Port

150,00 EGP
  1. Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
  2. 24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB
  3. Fully supports FAT16, FAT32 file system
  4. Maximum support 32G TF card
  5. Support U disk to 32G, 64M bytes of NORFLASH
  6. A variety of control modes are available. IO control mode, serial mode, AD key control mode

MPU-9250 9-DOF IMU Sensor Module – 3-Axis Gyroscope, 3-Axis Accelerometer & 3-Axis Magnetometer (I2C/SPI Interface)

750,00 EGP
  • 6-Axis Sensor: Combines 3-axis gyroscope and 3-axis accelerometer.
  • Adjustable Sensitivity: Selectable ranges for both accelerometer and gyroscope.
  • I2C Communication: Easy integration with Arduino, Raspberry Pi, and other microcontrollers.
  • Low Power Consumption: Ideal for battery-powered applications.
  • Compact Size: Easy to mount on various platforms.
  • Wide Application Range: Perfect for motion tracking, robotics, drones, and wearable devices.

MPU6500 6-Axis Attitude Gyro + Accelerometer Sensor Module | I²C/SPI Interface

300,00 EGP
  1. Accelerometer, Gyroscope
  2. Power Supply: DC3.3V-5V
  3. Chip: MPU9250
  4. Size: 22 mm x 17 mm.
  5. Gyro range : ± 250 500 1000 2000 ° / s
  6. Acceleration range: ± 2 ± 4 ± 8 ± 16g
  7. 9 DOF modules

MQ-135 Air Quality/Gas Detector Sensor Module For Arduino

100,00 EGP
  • Detects multiple gases: NH₃, benzene, alcohol, CO₂, NOₓ, smoke
  • Provides analog and digital outputs
  • Operates at 5V DC
  • Adjustable sensitivity via onboard potentiometer
  • Requires preheating (~24 hours) for accurate readings
  • Compact and easy to integrate

MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module

85,00 EGP
  • Detects smoke, LPG, butane, hydrogen, and other combustible gases
  • Provides analog and digital output signals
  • Fast response and high sensitivity
  • Compatible with Arduino and other microcontrollers
  • Easy to calibrate and use in gas leak detection projects
  • Operates at 5V power supply
  • Ideal for safety and environmental monitoring systems

MQ-5 Gas Sensor Module

80,00 EGP
  • Detects LPG, methane, natural gas, and propane
  • Dual output: analog and digital signals
  • Operates at 5V with low power consumption
  • Adjustable sensitivity via onboard potentiometer
  • Fast response and recovery time
  • Compact and easy to integrate

MQ-7 CO Carbon Monoxide Coal Gas Sensor Module

75,00 EGP
  1. Operating voltage: DC 5 V.
  2. The analog output voltage, the higher the concentration the higher the voltage.
  3. The carbon monoxide detection with better sensitivity.
  4. With a long service life and reliable stability.
  5. Rapid response and recovery characteristics.
  6. Range: 10 to 1000 ppm.

MT3608 DC-DC Adjustable Step-Up (Boost) Converter with USB Type-C (2A, 28V)

40,00 EGP
  • Boosts low DC voltage to higher adjustable output

  • USB Type-C input for easy connectivity

  • Compact and lightweight module

  • High efficiency and stable performance

  • Built-in over-temperature and short-circuit protection

  • Ideal for battery-powered projects and portable electronics

MT6701 14-Bit Magnetic Angle Sensor Module (AS5600 Alternative)

250,00 EGP
  • 🧲 14-bit magnetic angle sensor for precise rotation measurement
  • 🎯 Smooth, high-resolution output (AS5600 alternative)
  • 🧩 Ideal for knobs, robotics joints, gimbals, and encoders
  • 🚌 I2C interface for easy connection to microcontrollers
  • ⚡ Low power operation—great for portable/always-on systems
  • 📐 Works with common diametric magnets for angle sensing
  • 🛠️ Compact module—easy to mount and integrate
  • ✅ Great choice for contactless angle sensing with long life