Shop
Seeed XIAO ESP32-C6 WiFi6/BLE5/Zigbee Dev Board
1.200,00 EGP- 📡 Seeed XIAO ESP32-C6 dev board with WiFi 6 + BLE 5
- 🕸️ Built-in Zigbee/Thread (802.15.4) for smart home/IoT
- ⚡ Ultra-compact XIAO form factor—perfect for tiny projects
- 🔌 USB-C for power + programming
- 🧠 Powerful ESP32-C6 MCU for connected applications
- 🧩 Easy integration with sensors via GPIO / I2C / SPI / UART
- 🔋 Low-power modes for battery-powered devices
- 🏠 Ideal for Matter-ready IoT, automation, and wireless nodes
Self-Balancing Robot package for Arduino
Original price was: 1.500,00 EGP.1.193,77 EGPCurrent price is: 1.193,77 EGP.
Sensor Shield V5 Expansion Board For Arduino
75,00 EGP- 🧩 Sensor Shield V5 expansion board for Arduino (UNO compatible)
- 🔌 Breaks out I/O pins into easy 3-pin headers (GND/VCC/SIG)
- ⚡ Supports common servo, sensor, and module connections
- 🚌 Provides dedicated headers for I2C and UART modules
- 🤖 Perfect for robotics projects with multiple sensors
- 🛠️ Plug-and-play wiring—reduces messy jumper cables
- 📦 Easy stacking on Arduino for quick prototyping
- ✅ Great for beginners, makers, and fast sensor testing
Servo Motor PTZ Pan/Tilt Bracket Platform with Anti-Vibration Design
40,00 EGP- Dual-axis control – supports pan & tilt movement
- Servo-compatible – fits SG90, MG90, MG90S micro servos
- Anti-vibration design – improves stability for cameras/sensors
- Lightweight & durable – ideal for mobile robotics and drones
- Easy assembly – comes with pre-drilled holes and mounting hardware
- Versatile use – great for face tracking, surveillance, and object following
- Modular structure – integrates smoothly into Arduino/IoT setups
- Perfect for automation – mounts sensors, lasers, or mini cameras with ease
Servo Motor Standard (180) 11 kg.cm Metal Gears “MG996”
230,00 EGP- Weight: 55g
- Dimension: 40.7×19.7×42.9mm
- Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
- Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
- Operating voltage: 4.8 ~ 6.6V
- Gear Type: Metal gear
- Dead band width: 1us
- Wire length: 32cm
Servo Motor TowerPro MG995
220,00 EGP- High torque and fast response
- Metal gear construction for durability
- Accurate positioning with excellent holding power
- Compatible with most RC and microcontroller platforms
- Plug-and-play with standard 3-wire servo interface
Servo Tester (3CH 4.8-6V)
110,00 EGP- Tests up to 3 servos or ESCs at once
- Supports Manual, Neutral & Auto modes
- Works with 4.8V–6V DC power
- LED mode indicator
- Compact, lightweight, easy to use
- Great for servo testing and ESC calibration
SIM800C GSM GPRS Module
400,00 EGP- 📶 SIM800C GSM/GPRS module for cellular connectivity
- 📱 Supports calls, SMS, and GPRS data (2G network)
- 🔌 UART interface controlled via AT commands
- ⚡ Low power design suitable for embedded projects
- 🧩 Ideal for IoT monitoring, trackers, and SMS notification systems
- 📡 Works with Arduino, ESP32, STM32 via serial connection
- 📦 Compact module—easy to integrate into devices
- ✅ Reliable choice for GSM communication projects
SIM800L Quad-Band GPRS GSM Module with Antenna
310,00 EGP-
Quad-band GSM/GPRS module (850/900/1800/1900 MHz)
-
Low power consumption with sleep mode (~1mA)
-
Supports voice, SMS, and GPRS data
-
UART interface with AT command set
-
Compact size with antenna connector
-
Suitable for IoT and embedded applications
SIM800L V2.0 5V Wireless GSM GPRS MODULE
350,00 EGP- 📶 SIM800L V2.0 GSM/GPRS module for cellular connectivity
- 📱 Supports calls, SMS, and GPRS data (2G network)
- ⚡ 5V module input (onboard regulation depending on version)
- 🔌 UART serial control using AT commands
- 🧩 Ideal for IoT tracking, remote control, and SMS alerts
- 📡 Works with microcontrollers like Arduino/ESP32 (UART)
- 📦 Compact module—easy to integrate into projects
- ✅ Great for GSM-based communication and monitoring systems
Sliding Adjustable Potentiometer Module 10k
75,00 EGP- 🎚️ 10KΩ sliding potentiometer module (linear fader)
- 📏 Smooth slider control for easy adjustment
- 🔌 3-pin output: VCC / GND / Analog signal
- ⚡ Perfect as a voltage divider for analog input reading
- 🎛️ Great for volume, brightness, speed, and tuning control
- 🧩 Works with Arduino, ESP32, STM32, Raspberry Pi ADC
- 🛠️ Breadboard-friendly module for quick prototyping
- ✅ Ideal for mixers, controllers, and DIY interface panels
Soil Moisture Meter Sensor for Arduino
75,00 EGP- Measures soil moisture level via resistance changes
- Provides analog output compatible with Arduino and other microcontrollers
- Simple and low-cost sensor for plant and agriculture projects
- Easy to use with adjustable sensitivity
- Helps automate irrigation and monitor plant health
- Operates at 3.3V to 5V power supply
Solar cell 2.5V
40,00 EGP- 2.5V Output Voltage suitable for low-power electronics
- Compact Size ideal for small DIY and educational projects
- Environmentally Friendly renewable energy source
- Easy to Connect with solder pads or wires
- Perfect for Charging Small Batteries or Powering Microcontrollers
Solar Cell Panel – 18V 5W Polycrystalline
325,00 EGP- 18V Output Voltage suitable for small electronics and charging
- 5W Power Rating for efficient energy conversion
- Polycrystalline Silicon for durability and stable performance
- Compact and Lightweight for portable solar applications
- Ideal for DIY Solar Projects, Lighting, and Battery Charging
Solar Panel 1W 5V
150,00 EGP- 1 Watt power output at ~5V
- Compact and easy to integrate
- Renewable and clean solar energy source
- Ideal for small-scale solar and battery charging projects
Solder Wire 70/30 0.6mm (Taiwan)
800,00 EGP- 70% tin / 30% lead alloy for strong, reliable joints
- 0.6mm diameter – ideal for fine electronic work
- Rosin-core flux for smooth solder flow
- Melting point: ~183–190°C
- Minimal spatter & oxidation for cleaner soldering
- Made in Taiwan for consistent quality
