Shop

Gripper – Robot Mechanical Arm Aluminum Metal Claws

Original price was: 370,00 EGP.Current price is: 350,00 EGP.
  1. The degree of Freedom (DOF): 2
  2. Paw material: aluminum alloy
  3. Paw weight: about 68g (without motor)
  4. Claws overall length: 108mm (overall maximum length when closed paw)
  5. Claws overall width: 98mm (maximum overall width of the paw when open)
  6. Paw maximum opening angle: 55mm

GSM/GPRS/3G PCB Antenna with IPEX Connector (15cm, 3dBi) for SIM800/Sim908/Sim900 (1520)

40,00 EGP
  1. Name: 2G 3G IPEX antenna
  2. Connector type: ipx13
  3. Gain definition: 3dBi (Typical)
  4. Frequency band definition: 17102170MHz 800960
  5. Impedance definition: 50 ohm
  6. Total length: as shown in Figure
  7. Impedance 50 Ohm

GUVA-S12SD UV Sensor Module 240โ€“370nm

120,00 EGP
  • Detects UV radiation in the 240โ€“370 nm range (UVA & UVB)
  • Analog output proportional to UV intensity
  • Built-in operational amplifier for signal boosting
  • Compatible with 3.3V and 5V systems (operating range: 2.5Vโ€“5V)
  • High sensitivity, accuracy, and long-term stability
  • Low power consumption โ€“ ideal for portable devices
  • Compact form factor: 11mm ร— 27mm
  • Suitable for UV index monitoring, environmental sensing, and wearables

GY-213V HDC1080 Digital Humidity

195,00 EGP
  • High accuracy and stability for humidity measurement
  • Low power consumption, suitable for battery-operated devices
  • Easy integration with various microcontrollers via I2C interface
  • Compact size for easy embedding in different applications
  • Built-in temperature compensation for accurate humidity readings

GY-271 HMC5883L Triple Axis Magnetometer Sensor Module

150,00 EGP
  1. 3-axis magnetic electronic compass.
  2. Precise heading information.
  3. Operating Voltage:ย 3 -5 V DC.
  4. Driver Chip:ย HMC5883L.
  5. Communication:ย I2C protocol.
  6. Measuring range: ยฑ 1.3-8 Gauss.

GY-302 BH1750 Digital Light Sensor Module for Arduino 3V-5V

190,00 EGP
Description:

The GY-302 BH1750 Digital Light Sensor Module is a compact and efficient tool for measuring ambient light intensity. Designed for use with Arduino and other microcontrollers, it provides accurate light readings via the I2C interface, making it ideal for a range of lighting applications.

Features:

  • High Precision: Measures light intensity from 1 lux to 65535 lux.
  • Easy Integration: Utilizes I2C communication for straightforward connection and data handling.
  • Wide Voltage Range: Operates within 3V to 5V, compatible with various power sources.
  • Multiple Modes: Offers different resolution modes to balance precision and power consumption.
  • Compact Design: Small and lightweight, ideal for embedded and portable projects.

GY-31 TCS3200 Color Recognition Sensor Module Color Sensing Module

350,00 EGP
  • Uses TCS3200 Sensor for accurate color detection

  • Detects RGB Colors and converts to frequency output

  • Built-in White LEDs for consistent illumination

  • Compatible with Arduino, Raspberry Pi and other microcontrollers

  • Ideal for Line Tracking, Color Sorting, and Robotics Projects

GY-471 MAX471 Current Sensor Module โ€“ 3A DC 0โ€“30V Bidirectional Current Measurement for Arduino & Microcontrollers

165,00 EGP
  • โšก GY-471 current sensor module based on MAX471
  • ๐Ÿ” Measures DC current up to 3A (bidirectional sensing)
  • ๐Ÿ”‹ Supports load voltage range: 0โ€“30V
  • ๐Ÿ“ˆ Analog output for easy reading with Arduino/MCU ADC
  • ๐Ÿงฉ Ideal for battery monitoring, power profiling, and motor current
  • ๐Ÿ›ก๏ธ Low insertion lossโ€”minimal impact on the load
  • ๐Ÿ› ๏ธ Simple wiring: VIN+, VIN-, VCC, GND, OUT
  • โœ… Great for power management and protection projects

GY-521 MPU-6050 I2C Module 3-Axis Gyro & Accelerometer for Arduino

145,00 EGP
  1. 3-axis Gyro+Acceleration+Magnetic Fiel
  2. Air Pressure Module
  3. Power supply: 3-5V
  4. Build in ultra low noise linear LDO voltage regulator
  5. Built-in onboard filters, which reduce noise from motor and other high current electronics
  6. You can easily select two I2C address for MPU6050 by soldered jumper

GY-87 10DOF Module MPU6050 HMC5883L BMP180 Sensor

650,00 EGP
  1. 3-axis Gyro+Acceleration+Magnetic Fiel
  2. Air Pressure Module
  3. Power supply: 3-5V
  4. Build in ultra low noise linear LDO voltage regulator
  5. Built-in onboard filters, which reduce noise from motor and other high current electronics
  6. You can easily select two I2C address for MPU6050 by soldered jumper

GY-BMP280-3.3 Precision Altimeter Atmospheric Pressure BMP280 Sensor Module

70,00 EGP
  1. Comes with the BME280 sensor.
  2. Pressure accuracy of ยฑ1 hPa.
  3. Temperature accuracy ยฑ1.0ยฐC.
  4. Altimeter accuracy ยฑ1 meter.
  5. Humidity: +-3%

HC-05 Bluetooth Module with 6 Pins and Integrated Button

Original price was: 250,00 EGP.Current price is: 225,00 EGP.
  1. Bluetooth protocol: Bluetooth Specification v2.0+EDR.
  2. Frequency: 2.4GHz ISM band.
  3. Modulation: GFSK(Gaussian Frequency Shift Keying).
  4. Emission power: =4dBm, Class 2.
  5. Sensitivity: =-84dBm at 0.1% BER.