Shop
Brand
ESP32 38Pin MICRO
420,00 EGP2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applications
ESP32 D1 Mini – Dual Core WiFi Bluetooth Module
350,00 EGP- Dual-core ESP32 @ 240MHz
- Built-in WiFi (802.11 b/g/n) + Bluetooth 4.2
- Compact D1 Mini form factor
- 4MB Flash memory
- Supports Arduino IDE and MicroPython
ESP32 Development Board 38 pin WIFI – Bluetooth (Type C)
420,00 EGP-
Dual-Core ESP32 Processor with WiFi and Bluetooth support
-
38 GPIO Pins for versatile connectivity
-
Type-C USB Port for fast and reliable power/data
-
Built-in Flash & Antenna for wireless applications
-
Ideal for IoT, Smart Devices, and Embedded Projects
ESP32 Development Board CH9102X WiFi+Bluetooth
Original price was: 400,00 EGP.350,00 EGPCurrent price is: 350,00 EGP.- Ultra-low-power management.
- 4 MB Flash.
- Current: 80 mA.
- Supply Voltage: 3.0 V ~ 3.6 V.
- Data Rate: 150 Mbps.
- Frequency: 2.4 GHz.
ESP32 Type-C 30Pin Development Board (Wi-Fi Bluetooth)
400,00 EGP- Dual-core 32-bit processor (up to 240 MHz)
- Integrated Wi-Fi (2.4 GHz) & Bluetooth (v4.2 BLE)
- USB Type-C interface for power & programming
- 30 GPIO pins with multiple peripheral functions
- Supports Arduino IDE, MicroPython, ESP-IDF
- 4 MB Flash memory for large applications
- On-board voltage regulator (5 V → 3.3 V)
- Compact design with reset and boot buttons
ESP32-C3 SuperMini Development Board – Wi-Fi & Bluetooth 5.0 Microcontroller for IoT & Embedded Projects
350,00 EGP- 📡 ESP32-C3 SuperMini dev board with Wi-Fi + Bluetooth 5.0
- 📦 Ultra-compact size—perfect for space-limited builds
- ⚡ Low power operation for battery-based IoT nodes
- 🧠 RISC-V MCU performance for smart embedded applications
- 🔌 USB interface for easy programming and power
- 🚌 Supports GPIO / PWM / ADC / I2C / SPI / UART
- 🛠️ Compatible with Arduino IDE, ESP-IDF, and MicroPython
- ✅ Ideal for smart home, sensors, automation, and wireless control
ESP32-CAM-WROVER Dual-Core WiFi Module with Camera
700,00 EGP- Built-in ESP32 Dual-Core WiFi + Bluetooth
- Includes OV2640 2MP Camera
- Supports image streaming & face detection
- Ultra-low-power design
- No microSD card slot
- Compatible with Arduino IDE & ESP-IDF
- Ideal for IoT, AI vision, and surveillance projects
ESP8266 NodeMCU CP2102 Board
Original price was: 275,00 EGP.220,00 EGPCurrent price is: 220,00 EGP.- ESP8266 Wi-Fi microcontroller with 4MB flash
- Built-in CP2102 USB-to-serial converter
- Supports Arduino IDE and Lua scripting
- 3.3V logic with onboard voltage regulator
- Multiple GPIO pins with PWM, I2C, SPI
- Compact and easy to program via USB
Essential Components List for Learning Digital Logic Circuits
96,00 EGP
|
MB102 830 Points breadboard
In stock |
45,00 EGP
|
|---|---|
|
20cm Male-to-Male Jumper Wires
In stock |
1,00 EGP
|
|
Varta 9V battery
In stock |
50,00 EGP
|
96,00 EGP
In stock
Etching Solution Acid (125mL)
40,00 EGP-
Ready-to-use etching acid for copper-clad PCB boards
-
Delivers clean and effective copper removal
-
Suitable for DIY electronics, prototyping, and metal etching
-
Compact 125mL sealed plastic bottle
-
Easy to handle and store with proper safety precautions
-
Also usable for artistic metal etching applications
EU Power Cable For PC Computer Monitor Printer
25,00 EGP-
Standard EU Plug compatible with European outlets
-
3-Pin Connector (C13) fits most PCs, monitors, and printers
-
Durable & Insulated Cable for safe and reliable power delivery
-
1.2–1.5 Meter Length (varies by model) for flexible setup
-
Ideal for Home, Office, and IT Equipment Use
F/F – 10cm Female to Female 1 Jumper Wire
0,75 EGP- Female-to-Female connectors – compatible with 2.54mm male headers
- Length: 10cm – compact and flexible for tight spaces
- Ideal for breadboards and dev boards – Arduino, Raspberry Pi, sensors, modules
- Durable build – copper conductor with strong PVC insulation
- Plug-and-play convenience – no soldering needed
- Reusable and flexible – perfect for rapid prototyping
- Secure grip – solid crimp for reliable connectivity
- Versatile use – great for DIY kits, testing, and learning electronics
