Shop
Brand
ESC (Speed Controller for Brushless Motor) 30A with Motor Connectors
500,00 EGP- 30A current rating for brushless motors
- Pre-installed motor connectors for easy setup
- Supports smooth and precise speed control
- Compatible with LiPo batteries
- Built-in overcurrent and thermal protection
- High efficiency with stable performance
- Ideal for drones, RC cars, and DIY projects
ESP-01 ESP8266 Serial WiFi Module
110,00 EGP- 📡 ESP-01 module based on ESP8266 WiFi SoC
- 🔌 UART serial interface for easy communication with MCU
- ⚡ 3.3V operation (requires stable 3.3V supply)
- 🌐 Enables WiFi connectivity for IoT and smart projects
- 📶 Supports Station / Access Point modes
- 🧩 Ideal for wireless sensors, switches, and automation
- 🛠️ Programmable via USB-to-Serial adapter (ESP-01 programmer)
- ✅ Compact, low-cost solution for adding WiFi to projects
ESP-01S 5V WiFi Relay Module for Smart Home Control
65,00 EGP- ESP8266 wifi module onboard; in AP mode, it can connect to 5 clients simultaneously.
- Operating Method: Using an APP, a cellphone connected to a wifi module on the same router may operate the relay.
- Diode effusion protection.
- Short response time
ESP32 38Pin MICRO
420,00 EGP2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applications
ESP32 D1 Mini – Dual Core WiFi Bluetooth Module
350,00 EGP- Dual-core ESP32 @ 240MHz
- Built-in WiFi (802.11 b/g/n) + Bluetooth 4.2
- Compact D1 Mini form factor
- 4MB Flash memory
- Supports Arduino IDE and MicroPython
-13%
ESP32 Development Board CH9102X WiFi+Bluetooth
Original price was: 400,00 EGP.350,00 EGPCurrent price is: 350,00 EGP.- Ultra-low-power management.
- 4 MB Flash.
- Current: 80 mA.
- Supply Voltage: 3.0 V ~ 3.6 V.
- Data Rate: 150 Mbps.
- Frequency: 2.4 GHz.
ESP32 Type-C 30Pin Development Board (Wi-Fi Bluetooth)
400,00 EGP- Dual-core 32-bit processor (up to 240 MHz)
- Integrated Wi-Fi (2.4 GHz) & Bluetooth (v4.2 BLE)
- USB Type-C interface for power & programming
- 30 GPIO pins with multiple peripheral functions
- Supports Arduino IDE, MicroPython, ESP-IDF
- 4 MB Flash memory for large applications
- On-board voltage regulator (5 V → 3.3 V)
- Compact design with reset and boot buttons
ESP32-C3 SuperMini Development Board – Wi-Fi & Bluetooth 5.0 Microcontroller for IoT & Embedded Projects
350,00 EGP- 📡 ESP32-C3 SuperMini dev board with Wi-Fi + Bluetooth 5.0
- 📦 Ultra-compact size—perfect for space-limited builds
- ⚡ Low power operation for battery-based IoT nodes
- 🧠 RISC-V MCU performance for smart embedded applications
- 🔌 USB interface for easy programming and power
- 🚌 Supports GPIO / PWM / ADC / I2C / SPI / UART
- 🛠️ Compatible with Arduino IDE, ESP-IDF, and MicroPython
- ✅ Ideal for smart home, sensors, automation, and wireless control
ESP32-CAM-WROVER Dual-Core WiFi Module with Camera
700,00 EGP- Built-in ESP32 Dual-Core WiFi + Bluetooth
- Includes OV2640 2MP Camera
- Supports image streaming & face detection
- Ultra-low-power design
- No microSD card slot
- Compatible with Arduino IDE & ESP-IDF
- Ideal for IoT, AI vision, and surveillance projects
-20%
ESP8266 NodeMCU CP2102 Board
Original price was: 275,00 EGP.220,00 EGPCurrent price is: 220,00 EGP.- ESP8266 Wi-Fi microcontroller with 4MB flash
- Built-in CP2102 USB-to-serial converter
- Supports Arduino IDE and Lua scripting
- 3.3V logic with onboard voltage regulator
- Multiple GPIO pins with PWM, I2C, SPI
- Compact and easy to program via USB
Essential Components List for Learning Digital Logic Circuits
96,00 EGPEssential Components List for Learning Digital Logic Circuits
|
45,00 EGP
|
|
|
1,00 EGP
|
|
|
50,00 EGP
|
96,00 EGP
Etching Solution Acid (125mL)
40,00 EGP-
Ready-to-use etching acid for copper-clad PCB boards
-
Delivers clean and effective copper removal
-
Suitable for DIY electronics, prototyping, and metal etching
-
Compact 125mL sealed plastic bottle
-
Easy to handle and store with proper safety precautions
-
Also usable for artistic metal etching applications
