Shop
INA219 I2C Bi-Directional DC Current & Power Sensor Module (3–5V)
175,00 EGP- ⚡ INA219 current & power sensor module (bi-directional)
- 🚌 I2C interface—easy connection to Arduino/ESP32/STM32
- 🔋 Works with 3–5V logic and power systems
- 📈 Measures bus voltage, current, and power in real time
- 🎯 Great for battery monitoring and power consumption tracking
- 🛡️ Shunt-based sensing with good accuracy and stability
- 🛠️ Simple wiring: VCC, GND, SDA, SCL + VIN+/VIN-
- ✅ Perfect for DIY power management and protection projects
IR Sensor Infrared Obstacle Avoidance Module
35,00 EGP- Detection distance: 2 ~ 30cm
- Detection angle: 35 °
- Comparator chip: LM393
- 3mm screw holes for easy mounting
IRF530N 17A, 100V, 0.064 Ohm, N-Channel Power MOSFET
25,00 EGP-
100V, 17A N-Channel Power MOSFET
-
Low R<sub>DS(on)</sub>: 0.064Ω for reduced power loss
-
Fast switching performance
-
TO-220 package for easy heat management
-
Ideal for power control, switching, and motor drive circuits
IRF740 N-Channel MOSFET
22,00 EGP- 400V Drain-to-Source Voltage
- 10A Continuous Drain Current
- Low R DS(on) for efficient switching
- TO-220 package for easy mounting
- Ideal for SMPS, inverters, and motor control
IRFZ44N 49A, 55V, 0.0175 Ohm, N-Channel Power MOSFET .
20,00 EGP-
49A, 55V N-Channel MOSFET
-
Ultra-low R<sub>DS(on)</sub>: 0.0175Ω – high efficiency
-
Fast switching with low gate drive
-
TO-220 package – easy to mount & cool
-
Perfect for motor drivers, inverters, and DC switching
IRFZ740N 33A, 100V, 0.040 Ohm, N-Channel Power MOSFET
25,00 EGP-
100V, 33A N-Channel Power MOSFET
-
Low R<sub>DS(on)</sub>: 0.040Ω – Efficient current handling
-
Fast switching, high input impedance
-
TO-220 package with heatsink compatibility
-
Perfect for power regulation, motor control, and SMPS
J347Y 2x17mm Yellow Plastic Micro Motor Pulley
10,00 EGP- Size: 2mm bore, 17mm diameter, designed for micro motors and compact projects.
- Material: Made from durable yellow plastic, lightweight and sturdy.
- Compatibility: Ideal for use with small DC motors, perfect for hobby electronics, robotics, and DIY projects.
- Precision: Precisely designed for efficient power transfer and smooth operation.
- Easy Installation: Simple to attach to micro motors, ensuring a secure fit for various mechanical applications.
JGA25-370-12V-250RPM 8.8Kg.cm DC motor Gear box
400,00 EGP- ⚙️ JGA25-370 DC geared motor with gearbox
- ⚡ 12VDC operation for robotics and automation projects
- 🚀 Output speed: 250 RPM (geared)
- 💪 High torque: 8.8 kg·cm for heavy-load applications
- 🤖 Ideal for robot cars, smart mechanisms, and conveyors
- 🔁 Smooth, stable rotation with gear reduction
- 🛠️ Easy to drive using H-bridge motor drivers
- ✅ Great choice for strong compact motion systems
KW7-9 SPDT Micro Limit Switch with Long Hinge Lever
25,00 EGP- Type: SPDT (Single Pole Double Throw) switch.
- Design: Long straight hinge lever for precise actuation.
- Durability: High-quality materials for extended lifespan.
- Applications: Ideal for machinery, appliances, and DIY electronics.
- Compact Size: Fits tight spaces with ease.
KY-028 Digital Temperature Module
45,00 EGP- Power supply: 3 – 5V
- Good sensitivity
- The output format: Digital switching output (0 and 1)
- The comparator output signal is clean, good waveform, driving ability, more than 15mA.
- A fixed bolt holes for easy installation.
- Using a wide voltage LM393 comparator.
L293D 2-Channel Driver H-bridge
35,00 EGP✅ Dual-channel H-bridge motor driver
✅ 36V, 600mA per channel (1.2A peak)
✅ TTL/CMOS compatible logic inputs
✅ Internal protection diodes
✅ Ideal for Arduino, Raspberry Pi, and small robotics
L293D Motor Driver Board
120,00 EGP- Drives 4 DC motors or 2 stepper motors
- 2 Servo motor ports (Pin 9 & 10)
- Dual L293D H-Bridge motor drivers (0.6A per channel)
- Supports motor voltages from 4.5V to 25V
- 8-bit speed control for DC motors
- Compatible with Arduino UNO, Mega, etc.
- 74HC595 shift register expands control pins
- External power support with protection jumper
- Onboard Arduino reset button
- Library support for easy coding
L298N DUAL FULL-BRIDGE DRIVER
55,00 EGP✅ Dual Full-Bridge (H-Bridge) Driver
✅ 46V, 2A Continuous per Channel
✅ Drives DC motors, stepper motors, and inductive loads
✅ TTL/CMOS Compatible Inputs
✅ Built-in Diode and Thermal Protection
✅ Ideal for Arduino, Raspberry Pi, and Robotics
L298N Motor Driver Module – 2A Dual Channel
Original price was: 95,00 EGP.90,00 EGPCurrent price is: 90,00 EGP.- Logical voltage: 5V
- Drive voltage: 5V-35V
- Logical current: 0-36mA
- Drive current: 2A (max. single bridge)
- Max power: 25W
- Dimensions: 44 x 44 x 28 (LxWxH)mm
- Weight: 26 gm
L7805CV Voltage Regulator
8,00 EGP-
Output: +5V @ 1.5A
-
Internal thermal and short-circuit protection
-
TO-220 package – supports heatsink mounting
-
Ideal for 5V DC regulated power supplies
-
Trusted and widely used in electronics and embedded systems
L7809CV Voltage Regulator
9,00 EGP- Stable +9V output with up to 1.5A current
- Built-in thermal, short-circuit, and overload protection
- Easy to implement with standard external capacitors
- Durable TO-220 package for heatsink mounting
- Widely used in regulated power supply circuits
L7812CV Voltage Regulator
9,00 EGP-
Stable +12V output up to 1.5A
-
Built-in protection against overheating and overcurrent
-
Easy to integrate with minimal external components
-
Ideal for regulated power supply design
-
Reliable TO-220 package for heat management
