[match_prediction match_id="3"]
DC Fan 5v (8x8cm)
55,00 EGP
Description
Keep your electronics running cool with this compact 5V DC brushless cooling fan, sized 80x80mm (8x8cm). Designed for reliable, continuous airflow in low-voltage projects, this fan is a popular choice for cooling Raspberry Pi enclosures, 3D printer electronics, small project boxes, power supply units, LED driver enclosures, and other DIY electronics builds where heat buildup needs to be managed.
Built with a brushless DC motor, this fan offers quiet operation, low power draw, and a long service life compared to brushed alternatives. The square frame with corner mounting holes makes it easy to install into standard 80mm fan cutouts, project enclosures, or 3D-printed brackets. With simple 2-wire (red/black) connection, it’s straightforward to wire directly to a 5V power source or connect through a header on your control board.
Whether you’re building a custom PC-style cooling setup, ventilating an electronics enclosure, or adding active cooling to a maker project, this 5V 80mm fan delivers dependable airflow in a compact footprint.
Key Features
- 5V DC Operation – Runs directly off standard 5V rails (USB, Raspberry Pi, Arduino power supplies)
- 80x80mm (8x8cm) Size – Standard fan size, compatible with common enclosure cutouts and brackets
- Brushless Motor – Quiet operation with longer lifespan and lower power consumption
- 2-Wire Connection – Simple red (+) / black (–) wiring for easy integration
- Compact & Lightweight – Fits easily into small project enclosures and tight spaces
- Corner Mounting Holes – Standard 4-hole mounting pattern for secure installation
- Continuous Airflow – Helps prevent overheating in enclosed electronics projects
- Wide Compatibility – Ideal for Raspberry Pi, 3D printers, PSUs, LED drivers, and custom builds
Specifications
| Specification | Detail |
|---|---|
| Voltage | 5V DC |
| Size | 80mm x 80mm x (thickness — confirm with supplier, typically 10-25mm) |
| Motor Type | Brushless DC |
| Wiring | 2-wire (Red: +, Black: –) |
| Frame Material | Plastic (PBT/ABS housing) |
| Mounting | 4 corner mounting holes |
| Connector | Bare wire leads (confirm if connector/header included) |
| Bearing Type | (confirm: sleeve/ball bearing — affects lifespan & noise) |
| Airflow Direction | Standard front-to-back exhaust |
| Application | Raspberry Pi, 3D printers, enclosures, PSUs, LED drivers, DIY electronics |
Suggested Package Includes
- 1x DC Cooling Fan (5V, 80x80mm)
Specification
General
| WeightWeight | 0,0000 g |
|---|---|
| Dimensions | 80mm × 80mm × 25mm |
| Rated Voltage | 5V DC |
| Operating Voltage Range | 4.5V ~ 5.5V DC |
| Wiring Configuration | 2-Wire (Red: VCC Positive, Black: GND Negative) |
| Blade Design | 7-Blade Impeller |
| Rated Current | 0.20A, 200mA |
| Power Consumption | 1.0W |
| Speed | 2500 RPM ~ 2800 RPM |
| Airflow | 32 CFM ~ 40 CFM |
| Noise Level | ≤ 28 dBA |
| Bearing Type | Sleeve Bearing, Hydraulic Bearing |
| Housing Material | High-Density PBT Plastic |
| Mounting | 4x Unthreaded Corner Holes |
| Applications | 3D Printer Mainboards, Arduino & ESP32 Enclosures, Custom Electronics Cooling |
