Batteries | Chargers and Accessories
10A PWM Solar Charge Controller – Smart Charging for 12V/24V Off-Grid Systems
650,00 EGP- 10A PWM Smart Charging – 3-stage charging for 12V/24V lead-acid batteries
- Automatic Voltage Detection – Auto-detects and switches between 12V/24V systems
- Full Battery Protection – Shields against overcharge, deep discharge, short circuit & reverse polarity
- LCD Display & LED Indicators – Monitor voltage, current, load status in real time
- Adjustable Parameters – Customize float voltage, LVD, and charging modes
- Temperature Compensation – Adapts charging based on temperature changes
- Dual USB Output Ports – Conveniently charge mobile devices directly
- Load Control Modes – Choose manual, timer, or dusk-to-dawn operation
- Compact & Efficient – Space-saving with low self-consumption
3S 10A 12V 18650 Lithium Battery Charger Board Protection Module BMS
55,00 EGP- Over discharge voltage range : 2.3-3.0 v ± 0.05.
- Recharge voltage range: 4.25-4.35 v ± 0.05 v.
- Operating current : 6-8A.
- Operating temperature : -40 to + 50 ℃.
- Current limit : 10-13A.
3S 20A 12V 18650 Lithium Battery Charger Board Protection Module BMS
65,00 EGP- 3S 12V Configuration: Designed for 3-series 18650 lithium batteries (10.8V–12.6V system).
- 20A Discharge Current: Supports high current output, suitable for power tools and e-bikes.
- Built-in BMS Protection: Includes overcharge, over-discharge, overcurrent, and short circuit protection.
- Compact Design: Lightweight and easy to integrate into custom battery packs.
- Efficient Charging Management: Ensures safe and balanced charging across all cells.
5V 2A Power Adapter with DC Plug
75,00 EGP- Provides stable 5V output at 2A
- Comes with standard 5.5×2.1mm DC barrel plug
- Compatible with Arduino, Raspberry Pi, and other devices
- Includes overcurrent and short-circuit protection
- Compact and lightweight design
9V 10cm Battery Connector
5,00 EGP- Hard leather construction with fine workmanship
- Red and black wires to prevent polarity mistakes
- 10 cm cable length for flexible connections
- Prevents short circuits and ensures reliable power delivery
- Snap-on connector for quick battery attachment/detachment
AC/DC Power Adapter (5V 1A)
50,00 EGP- Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz.
- Input current (mA): 100.
- Output Power: 5V 1A.
- Input Plug: 2-Pin EU type.
- Output Plug: 5.5mm DC plug.
Battery Charger 2 Cell For 18650 Battery
95,00 EGP- Charges 1–2 × 18650 Li-ion batteries simultaneously
- Independent slots with CC/CV charging
- LED indicators for charging/full status
- Built-in safety protections (overcharge, short-circuit, reverse polarity)
- Compact and lightweight for portability
- Input: AC 100–240V or DC 5V (USB, model dependent)
- Output: 4.2V per slot, ~500–1000mA charging current
Battery Charger for 18650 Li-ion 1 Cell YH-07
50,00 EGP-
Designed for 1×18650 Li-ion battery (3.7V)
-
Compact and portable charging dock
-
LED indicators: Red (charging), Green (fully charged)
-
Built-in protection: overcharge, short-circuit, reverse polarity
-
USB-powered – compatible with wall adapters, laptops, power banks
-
Ideal for flashlights, DIY projects, and battery testing
Battery Holder ( 1 x 18650 ) (3.7v)
12,00 EGP- 🔹 Holds 1 x 18650 battery (3.7V)
- 🔧 Pre-soldered leads for easy connection
- 🧱 Made of high-quality plastic
- 🛠️ Easy to install and use
- ⚠️ Compatible with standard 18650 batteries (not included)
Battery Holder ( 2 x 18650 ) (3.7v)
20,00 EGP- Hold 2 standard 18650 batteries.
- Wire Length: 15 cm.
- Output: 7.2v.
- Dimension (Appro.) : 76 x 40 x 20 mm
- Weight: 12gm
- High-quality plastic material
Battery Holder ( 3 x 18650 ) (3.7v)
25,00 EGP- Hold 3 standard 18650 batteries.
- Wire Length: 15 cm.
- Output: 11.1 V.
- Dimension (Appro.) : 76 x 60 x 18 mm.
- Weight: 18 gm.
- High-quality plastic material
Battery Holder for CR2025/CR2032 PCB Mount
4,50 EGP-
Compatible with CR2025 & CR2032 coin cell batteries
-
PCB Mountable for secure and stable installation
-
Metal Contacts provide reliable electrical connection
-
Compact Design suitable for slim electronic devices
-
Durable Plastic Housing ensures long-lasting performance
Battery Holder for CR2450 PCB Mount
8,00 EGP-
Fits CR2450 Coin Cell (3V lithium battery)
-
PCB Mount Design for stable soldering
-
Secure Metal Contacts ensure reliable power connection
-
Compact & Low-Profile ideal for embedded and wearable projects
-
Durable Plastic Body for long-term use
GP Supercell 9V Battery – Long Power for Electronics
40,00 EGPHigh-quality 9V battery providing stable and consistent power for electronics, Arduino projects, smoke detectors, and more. Compact, durable, and ready to use.
✅ Long-lasting and reliable performance
✅ Suitable for electronics and DIY projects
✅ Compact 9V form factor
✅ Safe and leak-resistant design
Male 2.1*5.5mm for DC Power Jack Adapter Connector Plug
7,00 EGP- Universal Compatibility – 2.1mm (ID) × 5.5mm (OD) fits most DC jacks
- Tool-Free Wiring – Screw or solder terminals for quick connections
- Robust Build – Durable ABS housing and nickel-plated contacts
- High Current Capacity – Supports up to 5A (with proper wiring)
- Ideal for DIY Projects – Perfect for Arduino, Raspberry Pi, CCTV, and LED setups
- Compact & Reliable – Ensures secure power delivery in small spaces
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
25,00 EGP- Dimension: 25 x 19 x 10 (LxWxH)mm.
- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
