Batteries | Chargers and Accessories
18650 Battery – 500mAh High Performance Rechargeable Li-ion Cell (Recycled)
40,00 EGPRecycled 18650 Li-ion rechargeable cell
500mAh capacity for compact, lightweight power
High-performance output for compatible devices
Eco-friendly choice by reusing tested cells
3.7V 220mAh LiPo Rechargeable Battery (402030) with Pre-Soldered Wires
65,00 EGP- 🔋 3.7V LiPo rechargeable battery (402030)
- ⚡ Capacity: 220mAh for small portable devices
- 📦 Compact size—ideal for tight enclosures
- 🔌 Pre-soldered wires for quick, easy connection
- 🧩 Great for wearables, IoT nodes, and small RC projects
- 🔁 Rechargeable—use with a proper LiPo charger module
- 🛡️ Handle with care: avoid over-charge/over-discharge
- ✅ Perfect lightweight power source for DIY electronics
3S 10A 12V 18650 Lithium Battery Charger Board Protection Module BMS
55,00 EGP- Over discharge voltage range : 2.3-3.0 v ± 0.05.
- Recharge voltage range: 4.25-4.35 v ± 0.05 v.
- Operating current : 6-8A.
- Operating temperature : -40 to + 50 ℃.
- Current limit : 10-13A.
3S 20A 12V 18650 Lithium Battery Charger Board Protection Module BMS
65,00 EGP- 3S 12V Configuration: Designed for 3-series 18650 lithium batteries (10.8V–12.6V system).
- 20A Discharge Current: Supports high current output, suitable for power tools and e-bikes.
- Built-in BMS Protection: Includes overcharge, over-discharge, overcurrent, and short circuit protection.
- Compact Design: Lightweight and easy to integrate into custom battery packs.
- Efficient Charging Management: Ensures safe and balanced charging across all cells.
500Ma Mini Solar Lipo Charger Board
100,00 EGP-
Based on CN3065 charge controller IC
-
Designed for single-cell LiPo battery charging
-
Solar panel input: 4.4V–6V
-
Max charging current: 500mA
-
Supports Micro-USB & solar input
-
JST-PH2.0 connectors for easy wiring
-
Battery status LEDs: Red (Charging), Green (Charged)
-
Built-in short circuit protection
-
Compact size, ideal for portable solar projects
-
Randomly shipped in HW-736 or equivalent version
5V 2A Power Adapter with DC Plug
75,00 EGP- Provides stable 5V output at 2A
- Comes with standard 5.5×2.1mm DC barrel plug
- Compatible with Arduino, Raspberry Pi, and other devices
- Includes overcurrent and short-circuit protection
- Compact and lightweight design
9V 10cm Battery Connector
5,00 EGP- Hard leather construction with fine workmanship
- Red and black wires to prevent polarity mistakes
- 10 cm cable length for flexible connections
- Prevents short circuits and ensures reliable power delivery
- Snap-on connector for quick battery attachment/detachment
Battery Charger 2 Cell For 18650 Battery
95,00 EGP- Charges 1–2 × 18650 Li-ion batteries simultaneously
- Independent slots with CC/CV charging
- LED indicators for charging/full status
- Built-in safety protections (overcharge, short-circuit, reverse polarity)
- Compact and lightweight for portability
- Input: AC 100–240V or DC 5V (USB, model dependent)
- Output: 4.2V per slot, ~500–1000mA charging current
Battery Charger for 18650 Li-ion 1 Cell YH-07
50,00 EGP-
Designed for 1×18650 Li-ion battery (3.7V)
-
Compact and portable charging dock
-
LED indicators: Red (charging), Green (fully charged)
-
Built-in protection: overcharge, short-circuit, reverse polarity
-
USB-powered – compatible with wall adapters, laptops, power banks
-
Ideal for flashlights, DIY projects, and battery testing
Battery Holder ( 1 x 18650 ) (3.7v)
12,00 EGP- 🔹 Holds 1 x 18650 battery (3.7V)
- 🔧 Pre-soldered leads for easy connection
- 🧱 Made of high-quality plastic
- 🛠️ Easy to install and use
- ⚠️ Compatible with standard 18650 batteries (not included)
Battery Holder ( 2 x 18650 ) (3.7v)
20,00 EGP- Hold 2 standard 18650 batteries.
- Wire Length: 15 cm.
- Output: 7.2v.
- Dimension (Appro.) : 76 x 40 x 20 mm
- Weight: 12gm
- High-quality plastic material
Battery Holder ( 3 x 18650 ) (3.7v)
25,00 EGP- Hold 3 standard 18650 batteries.
- Wire Length: 15 cm.
- Output: 11.1 V.
- Dimension (Appro.) : 76 x 60 x 18 mm.
- Weight: 18 gm.
- High-quality plastic material
Battery Holder ( 4 x 18650 ) (3.7v)
30,00 EGP- 🔋 Battery holder for 4× 18650 Li-ion cells (3.7V each)
- 🧩 Securely holds four cells for DIY battery pack builds
- 🔌 Easy wiring terminals/leads for quick connection
- 🛠️ Ideal for power banks, robots, LED projects, and portable power
- 📦 Durable plastic body keeps batteries stable and protected
- ⚡ Supports series/parallel configurations (depends on holder wiring)
- 🛡️ Use with a proper BMS/charger for Li-ion safety
- ✅ Great for prototyping rechargeable power systems
Battery Holder for CR2025/CR2032 PCB Mount
4,50 EGP-
Compatible with CR2025 & CR2032 coin cell batteries
-
PCB Mountable for secure and stable installation
-
Metal Contacts provide reliable electrical connection
-
Compact Design suitable for slim electronic devices
-
Durable Plastic Housing ensures long-lasting performance
Battery Holder for CR2450 PCB Mount
8,00 EGP-
Fits CR2450 Coin Cell (3V lithium battery)
-
PCB Mount Design for stable soldering
-
Secure Metal Contacts ensure reliable power connection
-
Compact & Low-Profile ideal for embedded and wearable projects
-
Durable Plastic Body for long-term use
BESTON R6F22S Extra Heavy Duty Battery 9V
45,00 EGPHigh-quality 9V battery providing stable and consistent power for electronics, Arduino projects, smoke detectors, and more. Compact, durable, and ready to use.
✅ Long-lasting and reliable performance
✅ Suitable for electronics and DIY projects
✅ Compact 9V form factor
✅ Safe and leak-resistant design
CN3791 12V MPPT Solar Charger Module
220,00 EGP- MPPT technology for maximum solar charging efficiency
- Supports single-cell LiPo battery charging
- Integrated CN3791 MPPT controller chip
- 2A max charging current for fast charging
- Works with 12V solar panels and other PV sources
- Four 2-pin JST-PH2.0 connectors pre-installed
- PWM switching frequency: 300KHz
- Plug-and-play: Easy connection between panel and battery
LCR18650 1200Mah Li-Ion Battery
45,00 EGP- 🔋 18650 Li-Ion rechargeable battery (LCR18650)
- ⚡ Capacity: 1200mAh for portable power projects
- 🔁 Rechargeable—ideal for repeated daily use
- 📏 Standard 18650 size fits common holders and packs
- 🔌 Great for flashlights, DIY power banks, and electronics
- 🧠 Use with a proper Li-Ion charger/BMS for safety
- 🛡️ Stable performance with low self-discharge
- ✅ Suitable for batteries packs and backup power setups
Power Bank Module 1A
50,00 EGP- 🔋 Power bank module with 5V / 1A output
- ⚡ Provides stable USB power for small devices
- 🧠 Ideal for DIY power banks and portable battery projects
- 🧩 Works with Li-ion/LiPo cells (حسب نوع الموديول)
- 🛡️ Protection features: over-charge / over-discharge / short-circuit
- 🔌 Easy wiring to battery + USB output
- 📦 Compact PCB—fits داخل أي enclosure بسهولة
- ✅ Great for Arduino/ESP32 projects needing portable 5V
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
25,00 EGP- Dimension: 25 x 19 x 10 (LxWxH)mm.
- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
