Shop
Brand
56mm 4-Blade Plastic Propeller (Blue)
25,00 EGP- 🔵 Blue plastic propeller with 4 blades
- 📏 Size: 56mm for compact airflow/thrust applications
- 🌀 4-blade design for smoother airflow and better push
- ⚙️ Compatible with small DC motors (with matching shaft)
- 💨 Ideal for mini fans, RC models, and DIY experiments
- 📦 Lightweight build for efficient rotation
- 🛠️ Easy to mount using suitable motor adapters
- ✅ Great for STEM, robotics, and prototyping projects
5A range Current Sensor Module ACS712
100,00 EGP- ⚡ ACS712 current sensor module (5A range)
- 🔁 Measures AC/DC current with Hall-effect sensing
- 📈 Analog voltage output proportional to current
- 🧩 Ideal for Arduino/MCU current monitoring and protection
- 🛡️ Electrical isolation between load and measurement circuit
- ⚡ Low resistance conduction path for minimal power loss
- 🛠️ Easy wiring: VCC, GND, OUT + IP+/IP- terminals
- ✅ Great for power supplies, motors, and battery monitoring
5mm Blue DIP LED
1,00 EGP- Standard 5mm diameter LED
- Bright blue light emission
- Low power consumption
- Easy to mount on breadboards or PCBs (DIP package)
- Typical forward voltage: ~3.0V
- Ideal for indicators, status lights, and electronic projects
5mm DIP LED Yellow
1,00 EGP- Standard 5mm diameter LED
- Bright yellow light emission
- Low power consumption
- Easy to mount on breadboards or PCBs (DIP package)
- Typical forward voltage: ~2.1–2.2V
- Ideal for indicators, status signals, and DIY electronics projects
5mm Green DIP LED
1,00 EGP- Standard 5mm diameter LED
- Bright green light emission
- Low power consumption
- Easy to mount on breadboards or PCBs (DIP package)
- Typical forward voltage: ~2.0V
- Ideal for indicators, status lights, and DIY electronics projects
5mm Red DIP LED
1,00 EGP- Standard 5mm diameter LED
- Bright red light emission
- Low power consumption
- Easy to mount on breadboards or PCBs (DIP package)
- Typical forward voltage: ~2.0V
- Ideal for indicators, status signals, and DIY electronics projects
5mm RGB LED (Common Cathode)
4,00 EGP- 🌈 5mm RGB LED with common cathode configuration
- 🔴🟢🔵 Separate R/G/B pins for full color mixing
- ⚡ Works great with 3.3V/5V microcontrollers (with resistors)
- 🎚️ Use PWM to control brightness and create effects
- 🧩 Ideal for indicators, decorative lighting, and DIY projects
- 📦 Standard 5mm through-hole package for easy soldering
- 🛠️ Breadboard friendly—quick prototyping
- ✅ Perfect for Arduino, ESP32, and electronics learning
5mm White DIP LED
1,00 EGP- Bright white light (5mm DIP)
- Forward Voltage: 3.0–3.4V
- Forward Current: ~20mA
- Viewing Angle: ~30°
- Long life >50,000 hours
- Through-hole 2-pin design
5V 1 Channel Relay Active low
40,00 EGP- The module using Songle relay control.
- AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
- Power indicator (green), relay status indicator light (red).
5V 2 Channel Relay Module
65,00 EGP- The module using Songle relay control.
- AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
- Power indicator (green), Two ways of relay status indicator light (red).
- Using 8550 transistor-driven, strong driving ability.
- Has the fixed bolt hole and easy installation.
5V 2A Adapter – Single Jack
75,00 EGP- 🔌 Original LG charger adapter with single USB output
- ⚡ Output: 5V / 2A for fast, stable charging
- 📱 Compatible with phones, power banks, and USB devices
- 🛡️ Built-in protection: over-current / over-voltage / short-circuit
- 🔥 Safe, reliable performance for daily use
- 📦 Single jack design—simple and compact
- ✨ Like new condition—clean and well maintained
- ✅ Great replacement or spare charger for home/office
