Shop

7485 4-bit Magnitude Comparator

25,00 EGP
  • Compares two 4-bit binary numbers (A and B)
  • Provides outputs for A > B, A = B, and A < B
  • Operates with standard TTL logic levels
  • Cascadable for comparing larger bit-width numbers
  • Commonly used in digital sorting, arithmetic, and decision circuits
Add to cart

7486 Quad EXCLUSIVE-OR Gate

14,00 EGP
  • Contains four independent 2-input XOR gates
  • Operates on standard TTL logic levels
  • Used for parity checking, bitwise addition, and logic functions
  • Fast switching speed with low power consumption
  • Widely used in digital circuits and signal processing
Add to cart

7490 Decade Counter

25,00 EGP
  • 4-bit binary decade counter IC

  • Counts from 0 to 9 (decimal) and then resets

  • Supports asynchronous reset and preset inputs

  • Operates at standard TTL logic levels

  • Commonly used in digital clocks, frequency dividers, and counters

Add to cart

8 Position DIP Switch

11,00 EGP
  • 8 individual ON/OFF toggle switches
  • Standard 2.54mm DIP format
  • Through-hole mounting for PCB
  • Rated for 12–24V DC, 25–50mA
  • High insulation resistance (≥100MΩ)
  • Compact binary configuration solution
  • Ideal for address, mode, and feature settings
Add to cart

8-Channel Bi-Directional Logic Level Converter TXS0108E for Arduino

65,00 EGP
  • 8 Channels: Supports 8 data lines for versatile applications.
  • Bi-Directional: Handles signal conversion in both directions.
  • Wide Voltage Range: Compatible with 1.2V to 5.5V logic levels.
  • Automatic Direction Detection: No need for manual configuration.
  • Compact Design: Ideal for space-constrained projects.
Add to cart

8.2k ohm 1/4 Watt (4pcs)

0,25 EGP

✅ 8.2K ohm resistor
✅ 0.25 watt power rating
✅ Through-hole axial leaded package
✅ Suitable for low-power electronics

Add to cart

82D05 5V Digital Power Channel Amplifier Bluetooth Speaker Module

50,00 EGP
  • 5V Power Supply for USB or battery-powered projects

  • Built-in Bluetooth Receiver for wireless audio streaming

  • Stereo Output with left and right channel terminals

  • Compact Size ideal for DIY speakers and audio projects

  • Low Power Consumption with efficient digital amplification

Add to cart

9V 10cm Battery Connector

5,00 EGP
  • Hard leather construction with fine workmanship
  • Red and black wires to prevent polarity mistakes
  • 10 cm cable length for flexible connections
  • Prevents short circuits and ensures reliable power delivery
  • Snap-on connector for quick battery attachment/detachment
Add to cart

A2212 1000KV Brushless Motor Kit – Efficient Power for RC Aircraft & DIY Projects

400,00 EGP
  • 1000KV Rating: Balanced RPM for stable, efficient flight

  • Complete Kit: Includes motor, X-mount, prop adapter, and screws

  • Lightweight: Weighs ~50g, perfect for park flyers and gliders

  • Durable Build: Features ball bearings, strong magnets, and quality windings

  • Easy Setup: Pre-soldered 3.5mm connectors for plug-and-play

  • Versatile Use: Ideal for RC planes, drones, gliders, and robotics

  • Budget-Friendly: Great value for beginners and DIY projects

Add to cart

A4988 Stepper Motor Driver

75,00 EGP
  1. Supply Voltage : 8-35 VDC.
  2. Current : 1.0A  (no heatsink ).
  3. Current : 2.0A (with heat-sinking).
  4. logic input : 3 – 5.5V .
  5. Automatic current decay mode detection / choice.
  6. Mixed with slow current decay mode.
Add to cart

AC/DC Power Adapter (5V 1A)

50,00 EGP
  1. Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz.
  2. Input current (mA): 100.
  3. Output Power: 5V 1A.
  4. Input Plug: 2-Pin EU type.
  5. Output Plug: 5.5mm DC plug.
Add to cart

ADC0808CCN PDIP-28 Analog to Digital Converter-ADC

Original price was: 150,00 EGP.Current price is: 120,00 EGP.

✅ 8-bit ADC with 8 input channels
✅ Parallel 8-bit digital output
✅ Single +5V power supply operation
✅ Fast conversion (~100 µs)
✅ Standard 28-pin PDIP package

Add to cart

AHT10 High Precision Digital Temperature And Humidity Measurement Module

180,00 EGP
  1. Interface type: I2C
  2. Working voltage: 1.8 – 6.0 V
  3. Interface size: 4*2.54mm pitch
  4. Humidity accuracy: typical ± 2%
  5. Humidity resolution: 0.024%
  6. Temperature accuracy: typical ± 0.3 ° C
Add to cart

Ai Thinker ESP32 CAM Development Board WiFi+Bluetooth with AF2569 Camera Module

650,00 EGP

Processor: ESP32-D0WD with dual-core 32-bit CPU
Camera: OV2640  or RHYX M21-45
Wireless: Wi-Fi 802.11 b/g/n + Bluetooth 4.2
Storage: MicroSD card support (up to 4GB) 💾
GPIO: 9 usable GPIO pins
Flash: 4MB SPI Flash
Power: 3.3V–5V operation ⚡
UART, SPI, I2C, PWM support
Low power consumption

Add to cart

AMS1117 3.3V Power Module 800mA

20,00 EGP
  • Regulated 3.3 V Output ideal for powering sensors and microcontrollers

  • 800 mA Maximum Current suitable for moderate-load electronics

  • Onboard Capacitors for stable voltage with minimal ripple

  • Compact PCB Module easy to integrate into DIY circuits

  • Standard Input Range supports up to ~12 V input voltage

Add to cart

Analog PH Sensor Kit

2.000,00 EGP
  1. Module power supply: 5 VDC.
  2. Measuring temperature: 0-50 ℃.
  3. Response time: ≤ 1min.
  4. pH sensor with BNC connector.
  5. Gain adjustment Potentiometer.
  6. Power indicator LED.
Add to cart

Arduino mega 2560 ATmega2560-16AU Board

1.000,00 EGP

✅ 54 Digital I/O pins with 15 PWM
✅ 4 UARTs and 16 analog inputs
✅ 256 KB Flash, 8 KB SRAM, 4 KB EEPROM
✅ 100% Arduino IDE compatible
✅ Perfect for large-scale embedded projects

Add to cart

Arduino MEGA 2560 R3 with CH340 Chip

Original price was: 1.250,00 EGP.Current price is: 1.200,00 EGP.
  1. Programmer: CH340
  2. Operating Voltage 5V
  3. Input Voltage (recommended) 7-12V
  4. Input Voltage (limits) 6-20V
  5. Digital I/O Pins 54 (of which 15 provide PWM output)
  6. Analog Input Pins 16
  7. DC Current per I/O Pin 40 mA
  8. DC Current for 3.3V Pin 50 mA
  9. Flash Memory 256 KB of which 8 KB used by bootloader

Arduino Nano 3.0 Controller Board – FT232

290,00 EGP
  • Based on ATmega328 microcontroller
  • FT232 USB-to-Serial driver for stable PC communication
  • Compact and breadboard-friendly design
  • 22 total I/O pins (14 Digital, 8 Analog)
  • Supports serial, I2C, and SPI communication
  • Onboard voltage regulator (5V & 3.3V)
  • Preloaded with Arduino bootloader for easy programming
  • Ideal for IoT, robotics, sensors, and embedded systems
Add to cart

Arduino Nano Cable – USB 2.0 A to USB 2.0 Mini B

20,00 EGP
  • Compatible with Arduino Nano V3 (Mini USB port)
  • USB 2.0 A to Mini-B 5-pin connector
  • Supports data transfer rates up to 480 Mbps
  • Compact 30cm length – perfect for desktop setups
  • Plug-and-play; no drivers needed
Add to cart

Ekosta Electronics Egypt

Ekosta Electronics Egypt | Leading Supplier of Arduino, Raspberry Pi, Motor Drivers & Electronics Components | Premium Spare Parts, Industrial Sensors & Robotic Kits | High-Quality Electronics at Competitive Prices | Fast Shipping & Expert Technical Support Across Egypt.