Shop
Brand
25GA370 DC Gear Motor With Encoder 250RPM 12Vdc
650,00 EGP- 12V, 250RPM DC gear motor
- Built-in quadrature encoder
- Metal gear construction for durability
- Compact 25mm body with D-shaft
- Ideal for robotics and motion control
25GA370 DC Gear Motor With Encoder 280RPM 12Vdc
625,00 EGP- 12V DC gear motor with encoder
- 280RPM output speed
- High torque metal gearbox
- Ideal for robotics & automation
2WD Smart Robot Car Chassis for Arduino
325,00 EGP- 🤖 2WD smart robot car chassis kit for Arduino projects
- 🧱 2-layer acrylic chassis for stronger build and more space
- ⚙️ Supports 2 DC geared motors for differential drive
- 🧩 Plenty of mounting holes for sensors and modules
- 🔋 Space for battery pack and control boards
- 🛠️ Easy assembly—ideal for beginners and STEM learning
- 🚗 Perfect base for line follower, obstacle avoider, and RC bots
- ✅ Great platform for robotics experiments and competitions
3 Channel Path Tracing Module
170,00 EGP- Integrated 3 IR sensors for accurate line/path detection
- Designed for black/white line tracking applications
- Output: Digital signal (HIGH/LOW) for each channel
- Adjustable sensitivity via onboard potentiometers
- Compatible with Arduino, Raspberry Pi, and microcontrollers
- Suitable for robotics, smart cars, and AGVs
- Simple 3-pin or 4-pin interface for easy wiring
- Operating Voltage: 3.3V–5V
3 Position DIP Switch
6,00 EGP- 3 individual SPST slide switches in a single DIP package
- 2.54mm pitch – perfect for breadboards and PCBs
- Clear ON/OFF labels for easy configuration
- Compact, low-profile design for tight spaces
- 25mA, 24V DC rated with ≤50mΩ contact resistance
- -20°C to +70°C operating temperature range
- Ideal for address setting, logic input, configuration
- Through-hole mount – microcontroller & embedded projects ready
3.3k ohm 1/4 Watt (4pcs)
0,25 EGP- Resistance: 3.3k Ohm
- Power Rating: 1/4 Watt (0.25W) per resistor
- Tolerance: ±5%
- Quantity: 4 pieces per pack
- Material: Carbon Film / Metal Oxide
- Temperature Coefficient: ±100ppm/°C
- Mounting Type: Through-hole
- Application: Suitable for low to medium-voltage circuits
3.3uF 50V Radial Electrolytic Capacitor
1,00 EGP- 3.3µF capacitance, ideal for signal coupling and bypassing
- Rated for 50V DC, suitable for low-to-moderate voltage circuits
- Radial through-hole design for secure PCB mounting
- Polarized electrolytic type for stable performance
- Wide operating temperature: -40°C to +105°C
- Ideal for filtering, decoupling, and audio applications
- Compact form factor for tight circuit layouts
3.3V/5V MB102 Breadboard Power Supply Module
50,00 EGPBreadboard power supply module, compatible with 5V, 3.3V.
Apply to MB102 breadboard
Input voltage: 6.5-12 V (DC) or USB power supply
Output voltage: 3.3V/5V can switch over
Maximum output current: <700 ma
Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V
On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
3.5″ inch ili9486 TFT Touch Shield LCD Module 480×320 for arduino uno mega2560
900,00 EGP- 3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines
3.7V 220mAh LiPo Rechargeable Battery (402030) with Pre-Soldered Wires
75,00 EGP- 🔋 3.7V LiPo rechargeable battery (402030)
- ⚡ Capacity: 220mAh for small portable devices
- 📦 Compact size—ideal for tight enclosures
- 🔌 Pre-soldered wires for quick, easy connection
- 🧩 Great for wearables, IoT nodes, and small RC projects
- 🔁 Rechargeable—use with a proper LiPo charger module
- 🛡️ Handle with care: avoid over-charge/over-discharge
- ✅ Perfect lightweight power source for DIY electronics
3/4″ DC 12V Normally Closed Solenoid Valve for Water
230,00 EGP- 🚰 3/4" DC solenoid valve for water systems
- 🔒 Normally Closed (NC): opens only when powered
- ⚡ 12VDC coil—easy to run from common power supplies
- 💧 Suitable for water control, irrigation, and filling systems
- 🧩 Ideal for automation with Arduino/PLC using relay/MOSFET
- 🛠️ Threaded 3/4" ports for quick plumbing installation
- 🛡️ Reliable sealing to prevent leaks when OFF
- ✅ Great for smart valves and flow control projects
