Shop
Brand
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
25,00 EGP- Dimension: 25 x 19 x 10 (LxWxH)mm.
- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
TP4056 5V 1A 18650 Battery Charger Module with Protection “TYPE-C USB
30,00 EGP- Input interface: Type C
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
TPL0501 100K Digital Potentiometer Module (256-Step SPI)
250,00 EGP- 🎚️ TPL0501 digital potentiometer module (100KΩ)
- 🔢 256-step resolution for precise resistance control
- 🚌 SPI interface for easy microcontroller control
- ⚡ Fast, repeatable adjustments—no mechanical wear
- 🧩 Ideal for gain/volume tuning, threshold setting, calibration
- 🔌 Works great with Arduino, ESP32, STM32, Raspberry Pi
- 🛠️ Simple wiring: VCC, GND, SCK, MOSI, CS
- 📦 Compact module for prototyping and embedded projects
Transformer 220V/12V-0V-12V 1A
120,00 EGP- 🔌 Step-down transformer: 220VAC input to 12V-0V-12V output
- ⚡ Center-tapped secondary for dual-rail power supplies
- 🔋 Current rating: 1A (suitable for medium-load circuits)
- 🧩 Ideal for rectifier + regulator projects (±12V supplies)
- 🛠️ Great for amplifiers, control boards, and DIY power supplies
- 🛡️ Provides electrical isolation from mains for safer designs
- 📦 Through-hole/lead type for easy mounting in enclosures
- ✅ Reliable choice for electronics labs and repair work
Transparent Acrylic Shell Box For Arduino UNO R3
35,00 EGP- Clear Acrylic Design: Offers full visibility of the board and status LEDs
- Perfect Fit: Precisely cut for Arduino UNO R3, with access to all ports and headers
- Protective Enclosure: Shields against dust, damage, and short circuits
- Easy Assembly: Comes with screws and layers for simple setup
- Durable & Lightweight: Sturdy yet portable for projects and displays
Triple Axis Accelerometer Module (ADXL 345)
320,00 EGP-
3-Axis Acceleration Detection (X, Y, Z axes)
-
High Resolution (13-bit) with ±2g to ±16g range
-
I2C and SPI Interfaces for easy microcontroller integration
-
Low Power Consumption ideal for portable devices
-
Used in Motion Sensing, Tilt Detection, and Robotics
TS-15 STEEL BEND TWEEZER
15,00 EGP-
Curved, Fine-Tip Design ideal for precision handling
-
High-Grade Stainless Steel Build resists corrosion and wear
-
Anti-Magnetic and Anti-Acid Finish for laboratory and electronics use
-
Comfort-Grip Arms allow controlled, stable operation
-
Perfect for Electronics Assembly, Model Work, and Laboratory Application
Turbidity Sensor Module – Liquid Suspended Particles Detection, Arduino Compatible, Analog Output
725,00 EGP- 🌊 Turbidity sensor module for suspended particles detection
- 📈 Analog output—easy reading with Arduino/MCU ADC
- 🔎 Measures water clarity for quality monitoring
- ⚡ Works with common 5V systems (module dependent)
- 🧩 Ideal for aquariums, water tanks, and DIY water testing
- 🛠️ Simple wiring: VCC, GND, AO (and DO if available)
- 📦 Compact board—easy to integrate into projects
- ✅ Great for IoT environmental and water monitoring setups
TYPE-C 5V Ultrasonic Mini Humidifier Atomizer Module
150,00 EGP- 💧 Ultrasonic mini humidifier/atomizer module (Type-C powered)
- ⚡ 5V input via USB Type-C for easy powering
- 🌫️ Produces fine mist for humidifying and atomizing
- 📦 Compact size—perfect for mini humidifier builds
- 🧩 Ideal for DIY aroma diffusers and small humidifier projects
- 🔌 Easy integration with power banks and USB adapters
- 🛠️ Simple module design—quick to assemble in an enclosure
- ✅ Great for desktop, car, and portable humidifier setups
ULN2003 Driver Module Stepper Motor Driver Board
40,00 EGP- Uses ULN2003A Darlington driver chip
- Compatible with 5V–12V stepper motors
- 4-phase LED indicators for motor status
- Directly supports 28BYJ-48 stepper motor (XH-5P connector)
- Easy connection to Arduino or other microcontrollers
- Compact and plug-and-play design
ULN2003 Seven Darlington Array DIP-16
10,00 EGP-
7-Channel Darlington Array for driving high-current loads
-
Input Compatible with TTL/CMOS Logic
-
Up to 500 mA Output Current Per Channel
-
Built-in Flyback Diodes for inductive load protection
-
Standard DIP-16 Package for easy breadboard and PCB use
-
Ideal for Motors, Relays, Lamps, and LED Arrays
Ultra-Quiet DC 12V 3M 240L/H Brushless Submersible Water Pump
300,00 EGP- 12V DC brushless motor pump
- Max flow: 240 liters/hour
- Max lift height: 3 meters
- Ultra-quiet and energy-efficient
- Submersible and compact design
