Shop
Brand
Photo Resistor Sensor LDR 5mm GL5549 80kΩ~150kΩ P=3.4mm
6,00 EGP- High sensitivity photoresistor (LDR)
- Fast 30ms response time
- 540nm spectral peak
- 80–150KΩ at 10 Lux light resistance
- 20MΩ dark resistance
- Wide temp range: -30℃ to +70℃
- Epoxy resin sealed for durability
Photocell LDR Sensor Switch (ASO-AS-10) 10A
170,00 EGP-
Dusk-to-dawn automation: LDR turns lights ON at < 30 lux and OFF at > 150 lux
-
Energy saver: Lights run only when needed, cutting power costs
-
10 A load capacity: Drives up to ≈ 2 200 W of resistive lighting at 220 V AC
-
Anti-interference delay: 10–20 s pause stops false triggers (headlights, lightning)
-
Weatherproof IP44 housing: UV-stable polycarbonate for reliable outdoor use
-
Simple 3-wire hook-up: Live in, neutral, and switched live out
PIC16F628A-I/P
100,00 EGP- 8-bit PIC microcontroller with 14-bit instruction set
- Flash memory: 2K words program storage
- RAM: 224 bytes | EEPROM: 128 bytes
- Operating speed: up to 20 MHz
- I/O pins: 16 (with individual direction control)
- Built-in peripherals: USART, CCP, timers, comparators
- Operating voltage: 2.0V – 5.5V
- Package: 18-pin DIP (I/P) for easy prototyping
- Low-power features with sleep mode
PIC16F877A-I/P
220,00 EGP-
8-bit Microchip PIC microcontroller with 14 KB Flash
-
368 Bytes RAM and 256 Bytes EEPROM
-
10-bit 8-channel ADC
-
USART, SPI, I2C communication interfaces
-
Up to 20 MHz clock speed
-
40-pin PDIP package suitable for prototyping
PICkit3 Debugger Programmer Emulator Controller Development Board
2.200,00 EGP- Full-speed USB support using Windows standard drivers
- Real-time execution
- Processors run at maximum speeds
- Built-in over-voltage/short circuit monitor
- Low voltage to 5V (1.8 to the 5V range)
- Read/write program and data memory of the microcontroller
- Program up to 512K byte flash.
piezo sensor-Gold
30,00 EGP- High Sensitivity: Accurately detects vibrations, pressure, or impacts.
- Gold-Plated Electrodes: Enhanced conductivity and corrosion resistance for reliable performance.
- Wide Frequency Response: Ideal for applications in sound and vibration detection.
- Compact & Durable: Thin, flexible design with long operational life.
- Versatile Use: Suitable for musical instruments, alarms, medical devices, and industrial monitoring.
Pin Headers Female 2.54mm : 40-Pin, Straight, Black, 11mm
5,50 EGP-
40-pin single-row female header – easily cut to length
-
Standard 2.54mm (0.1″) pitch – fits most PCBs and breadboards
-
Straight vertical mounting for secure connections
-
11mm height – provides extra clearance for tall components
-
Durable black thermoplastic housing
-
Compatible with Arduino, Raspberry Pi, ESP32, and more
-
Ideal for shields, expansion boards, and prototyping
Pin Headers Male 2.54mm : 40-Pin, Straight, Black, 11mm
5,50 EGP-
40-pin male header strip – can be cut to custom lengths
-
Straight pins for vertical mounting on PCBs or breadboards
-
Standard 2.54mm pitch – compatible with Arduino, Raspberry Pi, etc.
-
11mm pin length for secure connections
-
Durable plastic spacer for alignment and soldering ease
-
Ideal for DIY electronics, shields, and module interfacing
PIR Motion Sensor Detector Module HC-SR501
75,00 EGP-
Passive Infrared sensor with control circuit
-
Adjustable sensitivity (3m to 7m) and hold time (5s to 200s)
-
Default blockade time: 2.5 seconds
-
Compact and easy to use
PL2303 USB to TTL Converter Module
75,00 EGP- Adopt imported controller PL2303HX, which can stabilize the flash with high speed
- 500mA self-recovery fuse for protection
- Two data transmission indicator can monitor data transfer status in real time
- Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power
- The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside,
- so that the board won’t be burnt down by material shortcut.
- Electrostatic package ensures the board will not be damaged before use
Plastic Propeller 4 Blades 100mm Red
25,00 EGPSupports in-circuit programming/debugging via ST-Link V2
PN532 NFC RFID Read / Write Module V3 Kit
250,00 EGP- Module Size: 42.7mm x 40.4mm x 4mm
- Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI and HSU modes
- Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of last version
- Built in PCB Antenna, with 5cm~7cm communication distance
- On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Work as RFID reader/writer
- Work as 1443-A card or a virtual card
