Shop
3.3uF 50V Radial Electrolytic Capacitor
1,00 EGP- 3.3µF capacitance, ideal for signal coupling and bypassing
- Rated for 50V DC, suitable for low-to-moderate voltage circuits
- Radial through-hole design for secure PCB mounting
- Polarized electrolytic type for stable performance
- Wide operating temperature: -40°C to +105°C
- Ideal for filtering, decoupling, and audio applications
- Compact form factor for tight circuit layouts
3.3V/5V MB102 Breadboard Power Supply Module
50,00 EGPBreadboard power supply module, compatible with 5V, 3.3V.
Apply to MB102 breadboard
Input voltage: 6.5-12 V (DC) or USB power supply
Output voltage: 3.3V/5V can switch over
Maximum output current: <700 ma
Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V
On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
3.5″ inch ili9486 TFT Touch Shield LCD Module 480×320 for arduino uno mega2560
Original price was: 850,00 EGP.820,00 EGPCurrent price is: 820,00 EGP.- 3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines
3.7V 220mAh LiPo Rechargeable Battery (402030) with Pre-Soldered Wires
65,00 EGP- 🔋 3.7V LiPo rechargeable battery (402030)
- ⚡ Capacity: 220mAh for small portable devices
- 📦 Compact size—ideal for tight enclosures
- 🔌 Pre-soldered wires for quick, easy connection
- 🧩 Great for wearables, IoT nodes, and small RC projects
- 🔁 Rechargeable—use with a proper LiPo charger module
- 🛡️ Handle with care: avoid over-charge/over-discharge
- ✅ Perfect lightweight power source for DIY electronics
3/4″ DC 12V Normally Closed Solenoid Valve for Water
230,00 EGP- 🚰 3/4" DC solenoid valve for water systems
- 🔒 Normally Closed (NC): opens only when powered
- ⚡ 12VDC coil—easy to run from common power supplies
- 💧 Suitable for water control, irrigation, and filling systems
- 🧩 Ideal for automation with Arduino/PLC using relay/MOSFET
- 🛠️ Threaded 3/4" ports for quick plumbing installation
- 🛡️ Reliable sealing to prevent leaks when OFF
- ✅ Great for smart valves and flow control projects
300 RPM 12V Dual Shaft DC Motor – Straight Drive
40,00 EGP- 300 RPM speed with good torque
- Operates on low voltage
- Lightweight plastic gear motor
- Absorbs shock and vibration
- Low friction & quiet operation
- Corrosion-resistant and low maintenance
330 ohm 1/2 Watt
0,25 EGP✅ 330 ohm resistance
✅ 0.5 watt power dissipation
✅ Through-hole axial package
✅ Widely used in LED and general circuits
330 Ohm 1/4 Watt Resistors
0,25 EGP- Precision: Accurate 330 ohm resistance for consistent circuit performance.
- Power Rating: 1/4 Watt, suitable for low-power applications.
- Versatile: Ideal for use in DIY electronics, audio circuits, and general-purpose applications.
- Durable: Made from high-quality materials for reliable long-term use.
- Compact: Perfect for breadboard setups, PCB designs, and tight circuit spaces.
33pF 50V Ceramic Capacitors
2,00 EGP- Capacitance: 33pF (picofarads), ideal for high-frequency applications.
- Voltage Rating: 50V, suitable for low-voltage circuits.
- Material: Made from high-quality ceramic for reliability and stability.
- Compact: Small size perfect for tight spaces in electronic circuits.
- Versatile: Commonly used in RF (radio frequency) circuits, oscillators, and filtering applications in electronics, audio systems, and signal processing.
370A Miniature Air Pump 3.7-12VDC 2.8W
200,00 EGP- 💨 370A miniature DC air pump for compact pneumatic projects
- ⚡ Wide voltage range: 3.7–12VDC
- 🔋 Power rating: 2.8W for efficient operation
- 📦 Small size—easy to fit inside tight enclosures
- 🧩 Ideal for inflators, air sampling, small suction systems
- 🛠️ Simple integration with tubes and basic wiring
- 🔁 Suitable for continuous running in DIY setups
- ✅ Great for Arduino/ESP32 automation and control projects
390 ohm 1/4 Watt (4pcs)
1,00 EGP- 🧰 Resistor set: 390Ω (1/4W) – 4 pieces
- ⚡ Power rating: 0.25W for general-purpose circuits
- 💡 Ideal for LED current limiting and indicator projects
- 🧩 Useful for pull-up/pull-down and biasing circuits
- 🛠️ Through-hole resistors—easy to breadboard and solder
- 📦 Pack of 4 pieces—handy for DIY builds and repairs
- 🔧 Common value for Arduino and electronics prototyping
- ✅ Reliable resistors for everyday use
3M Multipurpose Double Sided Mounting Tape – Washable Traceless 36 MM
40,00 EGP-
Strong double-sided adhesive with nano gel technology
-
Washable and reusable – simply rinse and dry
-
Traceless removal – leaves no sticky residue
-
36mm wide – ideal for heavy-duty applications
-
Easy to cut and apply on various surfaces
-
Sticks to glass, metal, tile, plastic, wood, and more
3S 10A 12V 18650 Lithium Battery Charger Board Protection Module BMS
55,00 EGP- Over discharge voltage range : 2.3-3.0 v ± 0.05.
- Recharge voltage range: 4.25-4.35 v ± 0.05 v.
- Operating current : 6-8A.
- Operating temperature : -40 to + 50 ℃.
- Current limit : 10-13A.
3S 20A 12V 18650 Lithium Battery Charger Board Protection Module BMS
65,00 EGP- 3S 12V Configuration: Designed for 3-series 18650 lithium batteries (10.8V–12.6V system).
- 20A Discharge Current: Supports high current output, suitable for power tools and e-bikes.
- Built-in BMS Protection: Includes overcharge, over-discharge, overcurrent, and short circuit protection.
- Compact Design: Lightweight and easy to integrate into custom battery packs.
- Efficient Charging Management: Ensures safe and balanced charging across all cells.
4 Channel Infrared Tracking Module
160,00 EGP- Working voltage (V): 3.3 ~ 5
- Working current (A): Above 1A
- Operating Temperature (℃): -10 ~ +50
- Mounting hole: M3
- Detection range: 1mm ~ 60 cm adjustable.
4 Position DIP Switch
6,50 EGP- 4 Independent Switches: Allows up to 16 ON/OFF configuration combinations.
- Compact Size: Ideal for space-constrained electronic projects.
- Manual Toggle Control: Simple, tool-free operation.
- Reliable Contacts: Low contact resistance for stable performance.
- Voltage & Current Rating: Up to 24V DC, 0.1–1A depending on model.
- Mounting Type: Through-hole or surface mount.
- Durable Build: Made of high-quality plastic and metal for long-term use.
- Applications: Used in embedded systems, robotics, DIY electronics, and device configuration.
4 WD Double Layer Smart Car Chassis Kit
360,00 EGP- 🤖 4WD smart robot car chassis kit (double-layer design)
- 🧱 Two-layer chassis for stronger build and extra mounting space
- ⚙️ 4-wheel drive for better traction and stability
- 🧩 Multiple mounting holes for Arduino, drivers, and sensors
- 🔋 Space for battery pack and electronics modules
- 🛠️ Easy assembly—great for beginners and STEM learning
- 🚗 Ideal for obstacle avoidance, line following, and RC robots
- ✅ Perfect base for robotics projects and competitions
4 WD Single Layer Smart Car Chassis Kit
360,00 EGP- Very handy and simple in assembling/disassembling.
- Strong components so as to withstand extreme terrain conditions.
- Transparent Car Chassis.
- Attractive design.
4-Channel Bi-directional Logic Level Converter
40,00 EGP- 🔁 4-channel bi-directional logic level shifting
- ⚡ Converts between 3.3V ↔ 5V signals (HV/LV rails)
- 🧩 Perfect for I2C, UART, SPI, and GPIO lines
- 🔌 Simple wiring: LV, HV, GND + 4 signal channels
- 📡 Enables 3.3V sensors to work with 5V microcontrollers
- 🛡️ Helps protect low-voltage devices from over-voltage
- 📦 Compact module for breadboard and prototyping use
- 🛠️ Ideal for Arduino, ESP32, Raspberry Pi, and STM32 projects
