Shop
Brand
GY-87 10DOF Module MPU6050 HMC5883L BMP180 Sensor
650,00 EGP- 3-axis Gyro+Acceleration+Magnetic Fiel
- Air Pressure Module
- Power supply: 3-5V
- Build in ultra low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from motor and other high current electronics
- You can easily select two I2C address for MPU6050 by soldered jumper
GY-BMP280-3.3 Precision Altimeter Atmospheric Pressure BMP280 Sensor Module
70,00 EGP- Comes with the BME280 sensor.
- Pressure accuracy of ±1 hPa.
- Temperature accuracy ±1.0°C.
- Altimeter accuracy ±1 meter.
- Humidity: +-3%
HC-05 Bluetooth Module with 6 Pins and Integrated Button
Original price was: 250,00 EGP.225,00 EGPCurrent price is: 225,00 EGP.- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
HC-SR04 Ultrasonic Distance Sensor Module
50,00 EGP- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
Heart Beat Pulse Sensor
170,00 EGP- 💓 Real-time heart rate monitoring
- 🔌 Simple 3-pin connection (VCC, GND, Signal)
- ⚙️ Built-in amplifier and noise filter
- 📏 Compact 16mm circular design
- 🤖 Compatible with Arduino, ESP32, Raspberry Pi
- 🧠 Analog output for easy integration
- 👆 Works on finger, earlobe, or wrist
Heart Rate Monitor Kit with AD8232 ECG sensor module
Original price was: 450,00 EGP.400,00 EGPCurrent price is: 400,00 EGP.- Measures heart’s electrical activity via ECG (Electrocardiogram)
- Integrated AD8232 chip for signal amplification and filtering
- Outputs analog ECG signal to Arduino or microcontroller
- Includes leads-off detection and shutdown function
- LED blinks with heartbeat rhythm
- 3.5mm jack for biomedical pads
- Suitable for fitness, portable ECG, and remote health applications
- Compact and cost-effective bio-signal acquisition module
- Not a medical-grade device
Heat Shrink Tubing (HST) Insulation Assorted kit : 45mm length – 328pcs
130,00 EGP328pcs Heat Shrink Tubing (HST) Insulation Assorted Kit (45mm Length)
The 328-Piece Heat Shrink Tubing Kit is an essential collection for any electronics hobbyist,
electrician, or DIY enthusiast. Made from high-quality, flame-retardant Polyolefin,
these tubes provide professional-grade insulation, strain relief, and color-coding for wire connections.
With a 2:1 shrink ratio, they ensure a tight and secure fit over solder joints and terminals.
Key Features
- Comprehensive 328-Piece Set: Includes 8 different diameters to cover everything from thin signal wires to thick power cables.
- Standard 45mm Length: All tubes are pre-cut to 45mm, ensuring a clean and uniform look for your wiring projects.
- 2:1 Shrink Ratio: The tubing shrinks to exactly half of its supplied diameter when heated, creating a waterproof and dustproof seal.
- Five Vibrant Colors: Yellow, Black, Red, Green, and Blue—perfect for easy circuit identification and polarity marking.
- Flame Retardant & Safe: Rated for high temperatures (-55°C to +125°C) and UL certified for electrical safety.
Kit Contents (Detailed Breakdown)
All pieces are 45mm in length. The kit includes:
| Inner Diameter | Quantity | Assorted Colors |
|---|---|---|
| 1.0 mm | 120 pcs | Yellow, Black, Red, Green |
| 2.0 mm | 60 pcs | Yellow, Black, Red, Blue |
| 3.0 mm | 32 pcs | Yellow, Black, Red, Green |
| 4.0 mm | 32 pcs | Yellow, Black, Red, Blue |
| 6.0 mm | 32 pcs | Yellow, Black, Red, Green |
| 8.0 mm | 20 pcs | Yellow, Black, Red, Blue |
| 10.0 mm | 16 pcs | Yellow, Black, Red, Green |
| 14.0 mm | 16 pcs | Yellow, Black, Red, Blue |
Technical Specifications
- Material: Polyolefin
- Shrinkage Temp: Minimum 84°C (Full recovery at 120°C)
- Operating Temp Range: -55°C to +125°C
- Dielectric Strength: 15 kV/mm
- Tensile Strength: 10.4 Mpa
- Standard Compliance: RoHS, UL, CE
How to Use
- Select a tube with a diameter slightly larger than the wire or joint you wish to insulate.
- Slide the tube over the connection.
- Apply heat evenly using a heat gun, lighter, or a hair dryer on high heat.
- The tube will shrink tightly around the wire in seconds.
Heater 12v 40w
55,00 EGP- 🔥 12V DC heater element rated at 40W
- ⚡ Fast heating for compact warming applications
- 🔋 Works with 12V power supplies or battery systems
- 🧩 Ideal for DIY heating projects, small enclosures, and incubators
- 🛠️ Easy to integrate with thermostat/relay/MOSFET control
- 📦 Compact design—fits in limited spaces
- 🛡️ Use proper insulation and heat-safe mounting for safety
- ✅ Great for temperature control and heating experiments
Hex L Key 3mm
5,00 EGP-
3mm hex size – fits standard M4 hex socket screws
-
Made from hardened carbon steel or chrome vanadium
-
L-shaped design for improved torque and control
-
Durable and wear-resistant – long service life
-
Ideal for electronics, robotics, 3D printers, and DIY repairs
High Quality Adapter 12V 2A with Single Jack (5.5×2.5mm) Used Like New
80,00 EGP-
Stable and regulated 12V DC, 2A output
-
5.5mm × 2.5mm DC barrel jack connector
-
Universal 100–240V AC input, 50/60Hz
-
Fully tested for performance – Used Like New condition
-
Compact, lightweight, and durable design
-
Ideal for a wide range of electronics and DIY applications
HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module
340,00 EGP- Bluetooth 4.0 BLE, TI CC2541 chip
- Supports master and slave modes
- UART interface with configurable baud rate via AT commands
- Wireless range up to 60 meters
- Built-in PCB antenna
- Fast connection interval (20 ms default)
- Supports 2-channel 14-bit ADC and 4-channel PWM outputs
- Anti-hijack password security
- Ultra-low power consumption with standby mode
- Transparent serial data transmission, no extra MCU needed
