Shop
Push Button Momentary
10,00 EGP-
Momentary Action: Activates only while pressed
-
Compact Design suitable for breadboards and panels
-
Normally Open (N.O.) Contacts for simple circuit control
-
Durable Plastic and Metal Build for long-lasting use
-
Ideal for DIY Electronics, Reset Switches, and Input Controls
Raindrop Detection Sensor Module
80,00 EGP- Operating voltage: 5V
- Provide both digital and analog output
- Adjustable sensitivity
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- Bolt holes for easy installation
Raspberry Pi 4 Case
200,00 EGP- ✅ Fits Raspberry Pi 4 Model B – custom cutouts for all ports
- 🖤 Matte black ABS plastic – sleek, strong, and professional
- 🛠️ Snap-fit assembly – tool-free and easy to install
- 🌬️ Built-in ventilation – supports passive cooling
- 🧩 Full GPIO & port access – no need to open the case
- 💻 Compact & lightweight – perfect for desktop or embedded use
- 🔧 Ideal for protection, housing, and Raspberry Pi projects
Raspberry Pi Camera Module 5MP for Pi 3/4 B+ (1080p/720p)
300,00 EGP- 5MP OV5647 CMOS sensor for high-quality imaging
- Captures up to 2592×1944 still images
- Supports 1080p30, 720p60, and VGA90fps video recording
- Connects via 15-pin CSI interface (ribbon cable included)
- Compatible with Raspberry Pi 2, 3, 3B+, 4
- Ideal for robot vision, surveillance, facial recognition
- Fully supported by Raspberry Pi OS camera libraries
Raspberry Pi Pico (RP2040)
560,00 EGP- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Onboard temperature sensor
Raspberry Pi Pico W
750,00 EGP- RP2040 microcontroller with 2MB of flash memory
- On-board single-band 2.4GHz wireless interfaces (802.11n)
- Micro USB B port for power and data (and for reprogramming the flash)
- 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
- Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
- 23 GPIO are digital-only, with three also being ADC capable
RDM6300 RFID Reader Module – 125KHZ
175,00 EGP- 125KHz RFID reader with built-in antenna
- Reads EM4100 compatible cards/tags
- UART output (9600 baud rate)
- 3.3V–5V operating voltage
- Reading range: up to 10cm
Recording Voice Module ISD1820 + Speaker
75,00 EGP-
Records up to 10 seconds of audio
-
Built-in microphone & speaker included
-
Supports multiple playback modes
-
Non-volatile flash memory
-
Compatible with Arduino and DIY projects
Reed Switch (Magnetic Switch) – Normally Open (N.O.)
15,00 EGP- Normally Open (N.O.) Contact closes in presence of magnetic field
- Simple 2-Pin Design for easy circuit integration
- Fast Response Time with no physical contact required
- Compact Glass Tube Construction for durability
- Ideal for Door Sensors, Security Systems, and Automation Projects
RFID (Radio Frequency ID) Cards
10,00 EGP- 125KHz frequency – compatible with EM4100/EM4200 systems
- 64-bit unique ID – permanently preprogrammed, read-only
- Standard credit card size – ISO/IEC 7810 compliant
- Durable PVC material – resistant to wear and bending
- Plug & play – works with most RFID readers and Arduino kits
- Wide temperature range – from -40°C to +85°C
RFID Tag (125KHz)
10,00 EGP- 125KHz operating frequency – compatible with EM4100/EM4200 readers
- Unique 64-bit ID – read-only and securely preprogrammed
- Key fob design – with keyring hole for easy carrying
- Durable and waterproof – built for harsh environments
- Plug & play – works with Arduino RFID kits and readers
- Wide temp range – operates from -40°C to +85°C
Robot Wheel 65mmx26mm + Metal Coupler 4mm Blue
200,00 EGP- Durable Rubber Tire: Provides strong grip and smooth motion
- 65mm Diameter x 26mm Width: Balanced size for stability and agility
- Aluminum Coupler (4mm bore): Fits standard DC/geared motors
- Ideal for Robots & RC Projects: Perfect for DIY robotics and mobile platforms
- Attractive Blue Finish: Adds a sleek look to your build
Rocker Switch On-Off-On 16A 250VAC KCD4 6 Pin Dim: 25x21mm
25,00 EGP-
Triple Position: On – Off – On configuration for circuit switching
-
High Current Rating: Handles up to 16 A at 250 VAC
-
6‑Pin Design supports dual-circuit control or pole selection
-
Compact Panel Mount with dimensions 25 × 21 mm
-
Robust and Durable for reliable use in appliances and machinery
RP360-ST-15250 DC Motor 12V 6260RPM
100,00 EGP- Rated for 12V DC – efficient for standard power supplies
- High-speed: 6260 RPM (no load) – ideal for fast-rotating tasks
- Compact design – ~15mm diameter fits tight enclosures
- Brushed DC motor – simple and reliable operation
- Face-mount holes – easy to install in various projects
- Low no-load current – ~<200mA for efficient operation
- Perfect for robotics & DIY – use in toys, pumps, fans, and gadgets
- Durable construction – made for continuous use
Self-Balancing Robot package for Arduino
Original price was: 1.256,60 EGP.1.193,77 EGPCurrent price is: 1.193,77 EGP.
Servo Motor PTZ Pan/Tilt Bracket Platform with Anti-Vibration Design
40,00 EGP- Dual-axis control – supports pan & tilt movement
- Servo-compatible – fits SG90, MG90, MG90S micro servos
- Anti-vibration design – improves stability for cameras/sensors
- Lightweight & durable – ideal for mobile robotics and drones
- Easy assembly – comes with pre-drilled holes and mounting hardware
- Versatile use – great for face tracking, surveillance, and object following
- Modular structure – integrates smoothly into Arduino/IoT setups
- Perfect for automation – mounts sensors, lasers, or mini cameras with ease
Servo Motor Standard (180) 11 kg.cm Metal Gears “MG996”
260,00 EGP- Weight: 55g
- Dimension: 40.7×19.7×42.9mm
- Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
- Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
- Operating voltage: 4.8 ~ 6.6V
- Gear Type: Metal gear
- Dead band width: 1us
- Wire length: 32cm
Servo Motor TowerPro MG995
220,00 EGP- High torque and fast response
- Metal gear construction for durability
- Accurate positioning with excellent holding power
- Compatible with most RC and microcontroller platforms
- Plug-and-play with standard 3-wire servo interface
Servo Tester (3CH 4.8-6V)
110,00 EGP- Tests up to 3 servos or ESCs at once
- Supports Manual, Neutral & Auto modes
- Works with 4.8V–6V DC power
- LED mode indicator
- Compact, lightweight, easy to use
- Great for servo testing and ESC calibration
SIM800L Quad-Band GPRS GSM Module with Antenna
310,00 EGP-
Quad-band GSM/GPRS module (850/900/1800/1900 MHz)
-
Low power consumption with sleep mode (~1mA)
-
Supports voice, SMS, and GPRS data
-
UART interface with AT command set
-
Compact size with antenna connector
-
Suitable for IoT and embedded applications
