Shop
General Purpose Relay SPDT (1 Form C) 5VDC Coil 10A Through Hole 5 Pin
12,00 EGP-
SPDT (Single Pole Double Throw) configuration – 1 Form C
-
5V DC coil – compatible with Arduino, ESP32, Raspberry Pi
-
Handles up to 10A current for AC/DC loads
-
5-pin through-hole design – easy for PCB integration
-
Compact, sealed plastic housing for durability
-
Suitable for switching lights, motors, fans, and more
-
Reliable, low-resistance contacts for consistent operation
Glass Fuse 3A – 250V (Size T5x20mm)
1,00 EGP- Rated 3A / 250V AC – ideal for standard AC protection
- Fast-blow fuse – quickly reacts to overcurrent conditions
- 5×20mm glass body – compact and industry-standard size
- Clear glass tube – easy to inspect fuse status visually
- Nickel-plated brass caps – excellent conductivity and corrosion resistance
- Fits standard fuse holders – compatible with 5×20mm mounts
- Reliable protection – for power supplies, chargers, appliances, and more
- General-purpose use – DIY, repair, and embedded circuit safety
Gripper – Robot Mechanical Arm Aluminum Metal Claws
Original price was: 370,00 EGP.350,00 EGPCurrent price is: 350,00 EGP.- The degree of Freedom (DOF): 2
- Paw material: aluminum alloy
- Paw weight: about 68g (without motor)
- Claws overall length: 108mm (overall maximum length when closed paw)
- Claws overall width: 98mm (maximum overall width of the paw when open)
- Paw maximum opening angle: 55mm
GSM/GPRS/3G PCB Antenna with IPEX Connector (15cm, 3dBi) for SIM800/Sim908/Sim900 (1520)
40,00 EGP- Name: 2G 3G IPEX antenna
- Connector type: ipx13
- Gain definition: 3dBi (Typical)
- Frequency band definition: 1710
2170MHz 800960 - Impedance definition: 50 ohm
- Total length: as shown in Figure
- Impedance 50 Ohm
GUVA-S12SD UV Sensor Module 240–370nm
120,00 EGP- Detects UV radiation in the 240–370 nm range (UVA & UVB)
- Analog output proportional to UV intensity
- Built-in operational amplifier for signal boosting
- Compatible with 3.3V and 5V systems (operating range: 2.5V–5V)
- High sensitivity, accuracy, and long-term stability
- Low power consumption – ideal for portable devices
- Compact form factor: 11mm × 27mm
- Suitable for UV index monitoring, environmental sensing, and wearables
GY-213V HDC1080 Digital Humidity
150,00 EGP- High accuracy and stability for humidity measurement
- Low power consumption, suitable for battery-operated devices
- Easy integration with various microcontrollers via I2C interface
- Compact size for easy embedding in different applications
- Built-in temperature compensation for accurate humidity readings
GY-271 HMC5883L Triple Axis Magnetometer Sensor Module
150,00 EGP
- 3-axis magnetic electronic compass.
- Precise heading information.
- Operating Voltage: 3 -5 V DC.
- Driver Chip: HMC5883L.
- Communication: I2C protocol.
- Measuring range: ± 1.3-8 Gauss.
GY-302 BH1750 Digital Light Sensor Module for Arduino 3V-5V
150,00 EGPDescription:
The GY-302 BH1750 Digital Light Sensor Module is a compact and efficient tool for measuring ambient light intensity. Designed for use with Arduino and other microcontrollers, it provides accurate light readings via the I2C interface, making it ideal for a range of lighting applications.
Features:
- High Precision: Measures light intensity from 1 lux to 65535 lux.
- Easy Integration: Utilizes I2C communication for straightforward connection and data handling.
- Wide Voltage Range: Operates within 3V to 5V, compatible with various power sources.
- Multiple Modes: Offers different resolution modes to balance precision and power consumption.
- Compact Design: Small and lightweight, ideal for embedded and portable projects.
GY-31 TCS3200 Color Recognition Sensor Module Color Sensing Module
350,00 EGP-
Uses TCS3200 Sensor for accurate color detection
-
Detects RGB Colors and converts to frequency output
-
Built-in White LEDs for consistent illumination
-
Compatible with Arduino, Raspberry Pi and other microcontrollers
-
Ideal for Line Tracking, Color Sorting, and Robotics Projects
GY-471 MAX471 Current Sensor Module – 3A DC 0–30V Bidirectional Current Measurement for Arduino & Microcontrollers
165,00 EGP- ⚡ GY-471 current sensor module based on MAX471
- 🔁 Measures DC current up to 3A (bidirectional sensing)
- 🔋 Supports load voltage range: 0–30V
- 📈 Analog output for easy reading with Arduino/MCU ADC
- 🧩 Ideal for battery monitoring, power profiling, and motor current
- 🛡️ Low insertion loss—minimal impact on the load
- 🛠️ Simple wiring: VIN+, VIN-, VCC, GND, OUT
- ✅ Great for power management and protection projects
GY-521 MPU-6050 I2C Module 3-Axis Gyro & Accelerometer for Arduino
145,00 EGP- 3-axis Gyro+Acceleration+Magnetic Fiel
- Air Pressure Module
- Power supply: 3-5V
- Build in ultra low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from motor and other high current electronics
- You can easily select two I2C address for MPU6050 by soldered jumper
GY-87 10DOF Module MPU6050 HMC5883L BMP180 Sensor
650,00 EGP- 3-axis Gyro+Acceleration+Magnetic Fiel
- Air Pressure Module
- Power supply: 3-5V
- Build in ultra low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from motor and other high current electronics
- You can easily select two I2C address for MPU6050 by soldered jumper
GY-BMP280-3.3 Precision Altimeter Atmospheric Pressure BMP280 Sensor Module
70,00 EGP- Comes with the BME280 sensor.
- Pressure accuracy of ±1 hPa.
- Temperature accuracy ±1.0°C.
- Altimeter accuracy ±1 meter.
- Humidity: +-3%
HC-05 Bluetooth Module with 6 Pins and Integrated Button
Original price was: 250,00 EGP.225,00 EGPCurrent price is: 225,00 EGP.- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
HC-SR04 Ultrasonic Distance Sensor Module
55,00 EGP- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 kHz
Heart Beat Pulse Sensor
170,00 EGP- 💓 Real-time heart rate monitoring
- 🔌 Simple 3-pin connection (VCC, GND, Signal)
- ⚙️ Built-in amplifier and noise filter
- 📏 Compact 16mm circular design
- 🤖 Compatible with Arduino, ESP32, Raspberry Pi
- 🧠 Analog output for easy integration
- 👆 Works on finger, earlobe, or wrist
Heart Rate Monitor Kit with AD8232 ECG sensor module
Original price was: 450,00 EGP.400,00 EGPCurrent price is: 400,00 EGP.- Measures heart’s electrical activity via ECG (Electrocardiogram)
- Integrated AD8232 chip for signal amplification and filtering
- Outputs analog ECG signal to Arduino or microcontroller
- Includes leads-off detection and shutdown function
- LED blinks with heartbeat rhythm
- 3.5mm jack for biomedical pads
- Suitable for fitness, portable ECG, and remote health applications
- Compact and cost-effective bio-signal acquisition module
- Not a medical-grade device
Heat Shrink Tubing (HST) Insulation Assorted kit : 45mm length – 530pcs
200,00 EGP- 🔥 Heat shrink tubing (HST) assorted insulation kit
- 📦 530 pieces with multiple sizes for different wires
- 📏 Each piece length: 45mm
- 🛡️ Provides strong insulation and wire protection
- 💧 Helps seal connections against dust and moisture
- 🧩 Ideal for cable repair, solder joints, and DIY wiring
- 🛠️ Shrinks evenly with heat gun or lighter (carefully)
- ✅ Perfect kit for electronics labs and workshops
Heater 12v 40w
55,00 EGP- 🔥 12V DC heater element rated at 40W
- ⚡ Fast heating for compact warming applications
- 🔋 Works with 12V power supplies or battery systems
- 🧩 Ideal for DIY heating projects, small enclosures, and incubators
- 🛠️ Easy to integrate with thermostat/relay/MOSFET control
- 📦 Compact design—fits in limited spaces
- 🛡️ Use proper insulation and heat-safe mounting for safety
- ✅ Great for temperature control and heating experiments
