ATmega32U4 5V 16MHz Arduino Pro Micro USB Development Board (Type-C)
- Based on ATmega32U4 with native USB support
- Operates at 5V / 16MHz
- Compatible with Arduino IDE (v1.0.1 and later)
- Micro USB interface for easy programming
- 4 x 10-bit ADC channels
- 12 digital I/O pins (5 with PWM capability)
- Rx and Tx serial communication pins
- Built-in voltage regulator, supports up to 12V input
- Breadboard-friendly design
425,00 EGP
Description
This Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino development board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like.
There is a voltage regulator on board, so it can accept up to 12V DC.
The Micro is a microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button.
It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.
The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.
If you supply an unstable power supply board, be sure to connect to the “RAW”, not on the VCC pin. It has also added a PTC fuse and diode protection to the power circuit and to correct the RX and LED TX circuits.
Features :
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection.
Pin Diagram:
Package Includes :
1 x Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
Specification
General
| Product Type | Development Board |
|---|---|
| Model | Pro Micro ATmega32U4 (Type-C) |
| Microcontroller | ATmega32U4 |
| Operating Voltage (V) | 5 |
| Input Voltage (V) | 5 (via USB) |
| Clock Speed (MHz) | 16 |
| Digital I/O Pins | 18 |
| PWM Pins | 5 |
| Analog Input Pins | 9 |
| Length (mm) | 33 |
| Width (mm) | 18 |
| Height (mm) | 5 |
| Weight (g) | 5 |
| Interface | USB Type-C |
| USB Communication | Native USB |
| Logic Level (V) | 5 |
| Compatibility | Arduino IDE |
| Architecture | AVR |
| Special Feature | HID Support (Keyboard / Mouse Emulation) |
| Application | Robotics, HID Devices, Wearables, Embedded Systems, DIY Electronics |
