USB Interface Module
CH340 USB Adapter for ESP8266 ESP-01/ESP-01S Programming
80,00 EGP- 🔌 CH340 USB-to-Serial adapter for ESP-01 / ESP-01S programming
- ⚡ Provides stable UART communication from PC to ESP8266
- 🧩 Designed socket for quick plug-in—no wiring needed
- 🛠️ Easy firmware upload for ESP8266 modules
- 📡 Supports flashing sketches from Arduino IDE and other tools
- 🔁 Reliable serial connection for debugging and monitoring
- 📦 Compact adapter—portable and beginner friendly
- ✅ Great tool for ESP8266 development and testing
CH340/CH340T USB to Serial Adapter with NRF24L01 2.4G Module for Arduino
250,00 EGP- 🔌 CH340/CH340T USB-to-Serial adapter for Arduino & modules
- 📡 Includes NRF24L01 2.4GHz wireless transceiver module
- ⚡ Easy serial communication for programming and debugging
- 🛰️ NRF24L01 supports low-power wireless data links
- 🧩 Ideal for wireless sensor networks and remote control projects
- 🚌 Works great with Arduino, ESP32, STM32 (with proper wiring)
- 🛠️ Plug-and-play USB serial interface (driver may be needed)
- ✅ Great bundle for quick RF experiments and prototyping
FTDI FT232RL USB to TTL Converter Module
155,00 EGP-
Based on reliable FTDI FT232RL chipset
-
Converts USB to 3.3V or 5V TTL serial signals
-
Selectable VCC output (3.3V / 5V) via jumper or solder pads
-
Standard 6-pin interface: DTR, RX, TX, VCC, CTS, GND
-
Supports auto-reset for Arduino boards (via DTR)
-
High-speed data rate up to 3 Mbps
-
Compatible with Windows, macOS, and Linux
-
Integrated USB Type-A / Mini / Micro USB (varies by version)
-
Compact and easy-to-use design
FTDI FT232RL USB to TTL Converter Module TYPE-C USB
150,00 EGP- FT232RL chipset – reliable USB-to-serial communication
- USB Type-C connector – reversible, modern design
- Supports 3.3V / 5V logic (selectable)
- Breakout pins: TX, RX, VCC, GND, CTS, DTR
- Plug-and-play on Windows, macOS, Linux
- Ideal for Arduino, ESP8266/ESP32, STM32
- Perfect for firmware flashing, serial debugging
I2C LCD Adapter Board (PCF8574) – 16×2 / 20×4
60,00 EGP- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
PL2303 USB to TTL Converter Module
75,00 EGP- Adopt imported controller PL2303HX, which can stabilize the flash with high speed
- 500mA self-recovery fuse for protection
- Two data transmission indicator can monitor data transfer status in real time
- Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power
- The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside,
- so that the board won’t be burnt down by material shortcut.
- Electrostatic package ensures the board will not be damaged before use
Programmer CH341A
400,00 EGP- USB interface
- With CH341A chip
- Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
- With 24/25 status indicator lamp
- Support USB to TTL conversionSupport 24EEPROM and 25 SPI flash 8pin/ 16pin chip
- Recognize 25 series chip automatically
- Supports download STC series procedure of single chip
- SPI pin to support expanding the utility
- STC microcontroller supports a full range of program download
- Support expanding the utility by SPI pin
- With SOP8 SOP16 to DIP8 converter board
ST-Link V2 Programmer for STM8/STM32
Original price was: 290,00 EGP.250,00 EGPCurrent price is: 250,00 EGP.-
Supports SWD protocol for STM32 microcontrollers
-
Supports SWIM protocol for STM8 microcontrollers
-
USB interface for easy PC connectivity
-
Compatible with STM32CubeIDE, STVP, ST-Link Utility, Keil, IAR
-
Firmware upgradable for future updates
-
LED status indicator for operation feedback
-
Includes Dupont jumper wires for flexible connections
USB ASP AVR Programming Device for ATMEL Processors
175,00 EGP- Compatible Chips:
- ATMega Series
- Tiny Series
- Classic Series
- CAN Series
- PWM Series
