Shop
AS608 Optical Fingerprint Sensor Module
Original price was: 1.100,00 EGP.850,00 EGPCurrent price is: 850,00 EGP.- Resolution: 500dpi
- Supply current: <60mA
- Supply voltage: 3.3V
- Fingerprint image entry time: <1.0 seconds
- Peak current: <60mA
ATMEGA328P-U without bootLoader
220,00 EGP- 131 powerful instructions – Most Single Clock Cycle Execution
- 32 x 8 general purpose working registers
- Fully static operation
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
Battery Charger 2 Cell For 18650 Battery
95,00 EGP- Charges 1–2 × 18650 Li-ion batteries simultaneously
- Independent slots with CC/CV charging
- LED indicators for charging/full status
- Built-in safety protections (overcharge, short-circuit, reverse polarity)
- Compact and lightweight for portability
- Input: AC 100–240V or DC 5V (USB, model dependent)
- Output: 4.2V per slot, ~500–1000mA charging current
Battery Charger for 18650 Li-ion 1 Cell YH-07
50,00 EGP-
Designed for 1×18650 Li-ion battery (3.7V)
-
Compact and portable charging dock
-
LED indicators: Red (charging), Green (fully charged)
-
Built-in protection: overcharge, short-circuit, reverse polarity
-
USB-powered – compatible with wall adapters, laptops, power banks
-
Ideal for flashlights, DIY projects, and battery testing
Battery Holder ( 1 x 18650 ) (3.7v)
12,00 EGP- 🔹 Holds 1 x 18650 battery (3.7V)
- 🔧 Pre-soldered leads for easy connection
- 🧱 Made of high-quality plastic
- 🛠️ Easy to install and use
- ⚠️ Compatible with standard 18650 batteries (not included)
Battery Holder ( 2 x 18650 ) (3.7v)
20,00 EGP- Hold 2 standard 18650 batteries.
- Wire Length: 15 cm.
- Output: 7.2v.
- Dimension (Appro.) : 76 x 40 x 20 mm
- Weight: 12gm
- High-quality plastic material
Battery Holder ( 3 x 18650 ) (3.7v)
25,00 EGP- Hold 3 standard 18650 batteries.
- Wire Length: 15 cm.
- Output: 11.1 V.
- Dimension (Appro.) : 76 x 60 x 18 mm.
- Weight: 18 gm.
- High-quality plastic material
Battery Holder for CR2025/CR2032 PCB Mount
4,50 EGP-
Compatible with CR2025 & CR2032 coin cell batteries
-
PCB Mountable for secure and stable installation
-
Metal Contacts provide reliable electrical connection
-
Compact Design suitable for slim electronic devices
-
Durable Plastic Housing ensures long-lasting performance
Battery Holder for CR2450 PCB Mount
8,00 EGP-
Fits CR2450 Coin Cell (3V lithium battery)
-
PCB Mount Design for stable soldering
-
Secure Metal Contacts ensure reliable power connection
-
Compact & Low-Profile ideal for embedded and wearable projects
-
Durable Plastic Body for long-term use
Battery Kit Breadboard (9V Input – Output 5V)
35,00 EGP- 9V input with regulated 5V output
- Breadboard-compatible design
- Plug-and-play for fast prototyping
- Ideal for Arduino, sensors, and logic circuits
- Includes 9V battery clip
BC547 NPN Transistor – DIP Package
1,00 EGP- NPN transistor in DIP package
- Max collector current: 100 mA
- Max collector-emitter voltage: 45 V
- High gain (hFE up to 800)
- Low noise for audio and signal applications
- Common for general-purpose amplification and switching
BC557 PNP General Purpose Transistor
1,00 EGP-
PNP transistor for general-purpose switching and amplification
-
-45V / -100mA ratings make it suitable for low-power circuits
-
TO-92 package for easy through-hole mounting
-
Widely used in audio, analog, and control applications
BD243 DIY Prototyping Kit of Mini Tesla Coil
210,00 EGP- Type: Diy kits
- Input voltage: 9-12V, can be started with a 9V battery, but if there is an arc, the working voltage needs 12V.
- PCB board size: 3.1x4cm/1.22×1.57inch
- Color: As shown
- Quantity: 1Set
BF120-3AA Precision Strain Gauges (120Ω) for Load Cells
50,00 EGP- 120Ω high-accuracy foil strain gauge
- Gauge factor: 2.0 ± 1% for precise signal output
- Compact 3×5mm grid for easy mounting
- Wide temperature range: -20°C to +80°C
- Stable, durable build suitable for long-term engineering use
Bluetooth Audio Receiver Board Module (VHM-314) (Type C)
100,00 EGP- Bluetooth 5.0: Stable, fast wireless audio streaming
- Type-C Power Input: Easy 5V supply via USB-C or battery
- High-Quality Audio: Low noise, clear stereo sound
- 3.5mm Output Jack: Connects directly to speakers or amplifiers
- Compact & DIY Friendly: Ideal for upgrading speakers or car audio systems
Breadboard 400 point
30,00 EGP- 400 tie points for circuit prototyping
- Solderless and reusable
- Includes power rails for easy voltage supply
- Compact and portable design
- Compatible with standard 0.1” pitch components
Bridge Rectifier ( 2A , 1000V )
5,00 EGP-
2A current capacity
-
1000V reverse voltage tolerance
-
Compact full-bridge design
-
Ideal for AC to DC conversion
-
Suitable for power supplies, chargers, and electronics projects
Bridge rectifier 4a
9,00 EGP- 4A Current Rating: Suitable for moderate power AC to DC conversion
- Wide Voltage Range: Typically supports up to 1000V reverse voltage
- Full-Wave Rectification: Converts AC input to smooth DC output
- Compact & Reliable: Ideal for power supplies and DIY electronics
- Easy to Mount: Standard 4-pin configuration for simple PCB integration
BT136-600E Logic Level Triac – 600V 4A
Original price was: 13,00 EGP.10,00 EGPCurrent price is: 10,00 EGP.- Logic-Level Control – Triggered by 3–5V signals, ideal for microcontrollers
- 600V Voltage Rating – Suitable for high-voltage AC load switching
- 4A RMS Current – Handles moderate loads like lamps, motors, and appliances
- Low Gate Trigger Current – 5mA typical, works directly with Arduino, ESP, etc.
- TO-220 Package – Easy to mount and thermally efficient
- Low On-State Voltage Drop – 1.7V max ensures efficient operation
- Reliable Performance – Operates from -40°C to +125°C
- Perfect for DIY & Automation – Great for dimmers, HVAC, smart lighting
