Shop
74283 4-Bit Binary Full Adders With Fast Carry
25,00 EGP✅ 4-bit binary full adder
✅ Fast carry look-ahead logic
✅ TTL compatible, DIP/SOIC package
✅ Ideal for ALUs, counters, digital arithmetic
✅ Carry-in/carry-out for cascading adders
7432 Quad 2-Input OR Gate Datasheet
14,00 EGP- Contains four independent 2-input OR gates
- Operates at standard 5V TTL logic levels
- Fast switching with low propagation delay
- Low power consumption
- Comes in 14-pin DIP or SMD packages
7442 BCD to Decimal Decoder
30,00 EGP- Converts 4-bit BCD input to one of 10 decimal outputs
- Outputs are active LOW (10 outputs)
- Supports standard TTL logic levels
- Used in digital display decoding and selection circuits
- Ideal for driving decimal displays or controlling devices by digit
7447 BCD to 7-segment Decoder/Driver (Open Collector)
25,00 EGP- Converts 4-bit BCD input to 7-segment display output
- Drives common-anode 7-segment displays
- Open-collector outputs for direct LED control
- Supports standard TTL logic levels
- Widely used in digital counters, clocks, and display systems
7448 (BCD to 7-Segment Decoder/Driver Common CATHODE)
30,00 EGP- Converts 4-bit BCD input to 7-segment display output
- Drives common cathode 7-segment LEDs directly
- TTL compatible inputs and outputs
- Includes lamp test and blanking inputs
- Supports ripple blanking for multi-digit displays
- Operates at standard 5V power supply
- Available in 16-pin DIP and SOIC packages
7474 Dual D Flip-Flop
20,00 EGP- Contains two independent D-type flip-flops
- Features asynchronous preset and clear inputs
- Positive-edge triggered clock input
- Standard TTL logic level compatible
- Used in data storage, registers, and timing circuits
7476 Dual JK Flip-Flop with Preset and Clear
18,00 EGP- Contains two independent JK flip-flops
- Features asynchronous preset and clear inputs
- Operates on standard TTL logic levels
- Edge-triggered on clock input
- Commonly used in counters, registers, and memory circuits
7483 4-bit Binary Full Adder
22,00 EGP- Performs 4-bit binary addition with carry input/output
- High-speed arithmetic operation
- TTL logic level compatible
- Used in digital calculators, ALUs, and arithmetic circuits
- Can be cascaded for wider bit addition
7485 4-bit Magnitude Comparator
25,00 EGP- Compares two 4-bit binary numbers (A and B)
- Provides outputs for A > B, A = B, and A < B
- Operates with standard TTL logic levels
- Cascadable for comparing larger bit-width numbers
- Commonly used in digital sorting, arithmetic, and decision circuits
7486 Quad EXCLUSIVE-OR Gate
14,00 EGP- Contains four independent 2-input XOR gates
- Operates on standard TTL logic levels
- Used for parity checking, bitwise addition, and logic functions
- Fast switching speed with low power consumption
- Widely used in digital circuits and signal processing
7490 Decade Counter
25,00 EGP-
4-bit binary decade counter IC
-
Counts from 0 to 9 (decimal) and then resets
-
Supports asynchronous reset and preset inputs
-
Operates at standard TTL logic levels
-
Commonly used in digital clocks, frequency dividers, and counters
74HC595 Shift Register (Serial-In Parallel-Out)
15,00 EGP- 🔁 8-bit shift register: Serial-In / Parallel-Out (SIPO)
- 🧩 Expands I/O pins—control 8 outputs using 3 wires
- ⛓️ Daisy-chainable to add more outputs easily
- ⚡ Fast switching for LEDs, displays, and digital control
- 🧠 Separate shift & storage registers for glitch-free updates
- 🔌 Works great with Arduino, ESP32, STM32, Raspberry Pi
- 💡 Ideal for LED matrices, 7-segment, relays, indicators
- 📦 Common DIP/SMD packages for prototyping or production
8 Position DIP Switch
11,00 EGP- 8 individual ON/OFF toggle switches
- Standard 2.54mm DIP format
- Through-hole mounting for PCB
- Rated for 12–24V DC, 25–50mA
- High insulation resistance (≥100MΩ)
- Compact binary configuration solution
- Ideal for address, mode, and feature settings
8-Channel Bi-Directional Logic Level Converter (1.8V–5V)
65,00 EGP- 8-channel logic level shifter
- 1.8V to 5V bi-directional conversion
- Ideal for MCU & sensor interfacing
- Easy to use and compact
8-Channel Bi-Directional Logic Level Converter TXS0108E for Arduino
65,00 EGP- 8 Channels: Supports 8 data lines for versatile applications.
- Bi-Directional: Handles signal conversion in both directions.
- Wide Voltage Range: Compatible with 1.2V to 5.5V logic levels.
- Automatic Direction Detection: No need for manual configuration.
- Compact Design: Ideal for space-constrained projects.
8.2k ohm 1/4 Watt (4pcs)
0,25 EGP✅ 8.2K ohm resistor
✅ 0.25 watt power rating
✅ Through-hole axial leaded package
✅ Suitable for low-power electronics
820 ohm 1/4 Watt (4pcs)
1,00 EGP- 🧰 Resistor set: 820Ω (1/4W) – 4 pieces
- ⚡ Power rating: 0.25W for general electronics circuits
- 💡 Ideal for LED current limiting and indicator circuits
- 🧩 Useful for pull-up/pull-down and signal biasing
- 🛠️ Through-hole resistors—easy breadboard and solder use
- 📦 Pack of 4 pieces—great for DIY builds and repairs
- 🔧 Common value for Arduino and prototyping projects
- ✅ Reliable resistors for everyday electronics work
82D05 5V Digital Power Channel Amplifier Bluetooth Speaker Module
50,00 EGP-
5V Power Supply for USB or battery-powered projects
-
Built-in Bluetooth Receiver for wireless audio streaming
-
Stereo Output with left and right channel terminals
-
Compact Size ideal for DIY speakers and audio projects
-
Low Power Consumption with efficient digital amplification
8x10MM Flexible Shaft Coupler
60,00 EGP- 🔩 Flexible shaft coupler (8mm × 10mm)
- 🌀 Flex design absorbs misalignment and reduces vibration
- ⚙️ Connects 8mm shaft to 10mm shaft/lead screw
- 💪 Helps protect bearings by reducing axial/radial stress
- 🛠️ Set-screw/clamp fixing for secure, anti-slip mounting
- 📏 Smooth torque transfer with less noise
- 🧩 Ideal for CNC machines, robotics, and motion systems
- ✅ Great for lead screw couplings and shaft extensions
