Shop
56mm 4-Blade Plastic Propeller (Blue)
25,00 EGP- 🔵 Blue plastic propeller with 4 blades
- 📏 Size: 56mm for compact airflow/thrust applications
- 🌀 4-blade design for smoother airflow and better push
- ⚙️ Compatible with small DC motors (with matching shaft)
- 💨 Ideal for mini fans, RC models, and DIY experiments
- 📦 Lightweight build for efficient rotation
- 🛠️ Easy to mount using suitable motor adapters
- ✅ Great for STEM, robotics, and prototyping projects
5A range Current Sensor Module ACS712
100,00 EGP- ⚡ ACS712 current sensor module (5A range)
- 🔁 Measures AC/DC current with Hall-effect sensing
- 📈 Analog voltage output proportional to current
- 🧩 Ideal for Arduino/MCU current monitoring and protection
- 🛡️ Electrical isolation between load and measurement circuit
- ⚡ Low resistance conduction path for minimal power loss
- 🛠️ Easy wiring: VCC, GND, OUT + IP+/IP- terminals
- ✅ Great for power supplies, motors, and battery monitoring
5mm Blue DIP LED
1,00 EGP- Standard 5mm diameter LED
- Bright blue light emission
- Low power consumption
- Easy to mount on breadboards or PCBs (DIP package)
- Typical forward voltage: ~3.0V
- Ideal for indicators, status lights, and electronic projects
5mm DIP LED Yellow
1,00 EGP- Standard 5mm diameter LED
- Bright yellow light emission
- Low power consumption
- Easy to mount on breadboards or PCBs (DIP package)
- Typical forward voltage: ~2.1–2.2V
- Ideal for indicators, status signals, and DIY electronics projects
5mm Green DIP LED
1,00 EGP- Standard 5mm diameter LED
- Bright green light emission
- Low power consumption
- Easy to mount on breadboards or PCBs (DIP package)
- Typical forward voltage: ~2.0V
- Ideal for indicators, status lights, and DIY electronics projects
5mm Red DIP LED
1,00 EGP- Standard 5mm diameter LED
- Bright red light emission
- Low power consumption
- Easy to mount on breadboards or PCBs (DIP package)
- Typical forward voltage: ~2.0V
- Ideal for indicators, status signals, and DIY electronics projects
5mm RGB LED (Common Cathode)
4,00 EGP- 🌈 5mm RGB LED with common cathode configuration
- 🔴🟢🔵 Separate R/G/B pins for full color mixing
- ⚡ Works great with 3.3V/5V microcontrollers (with resistors)
- 🎚️ Use PWM to control brightness and create effects
- 🧩 Ideal for indicators, decorative lighting, and DIY projects
- 📦 Standard 5mm through-hole package for easy soldering
- 🛠️ Breadboard friendly—quick prototyping
- ✅ Perfect for Arduino, ESP32, and electronics learning
5mm White DIP LED
1,00 EGP- Bright white light (5mm DIP)
- Forward Voltage: 3.0–3.4V
- Forward Current: ~20mA
- Viewing Angle: ~30°
- Long life >50,000 hours
- Through-hole 2-pin design
5V 1 Channel Relay Active low
40,00 EGP- The module using Songle relay control.
- AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
- Power indicator (green), relay status indicator light (red).
5V 2 Channel Relay Module
55,00 EGP- The module using Songle relay control.
- AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
- Power indicator (green), Two ways of relay status indicator light (red).
- Using 8550 transistor-driven, strong driving ability.
- Has the fixed bolt hole and easy installation.
5V 2A Power Adapter with DC Plug
75,00 EGP- Provides stable 5V output at 2A
- Comes with standard 5.5×2.1mm DC barrel plug
- Compatible with Arduino, Raspberry Pi, and other devices
- Includes overcurrent and short-circuit protection
- Compact and lightweight design
5V 5A SMPS Power Supply – 25W Switching Adapter
260,00 EGP- 5V DC Output at 5A – delivers 25W of regulated power
- Compact SMPS Design – energy-efficient and lightweight
- Overload, Over-voltage, and Short-circuit Protection
- Wide Input Voltage Support – typically 100–240V AC
- Ideal for Microcontrollers, LED Strips, and USB-Powered Devices
5V Active Buzzer Alarm
10,00 EGP-
5V DC operating voltage – plug-and-play functionality
-
Active buzzer with built-in oscillator – no signal required
-
Produces continuous tone at ~2.5 kHz frequency
-
Sound level: ~85 dB at 10 cm
-
Low current consumption – less than 30mA
-
Compact and lightweight – easy to mount on PCBs or breadboards
-
Ideal for alarms, alerts, and audio notifications
5x5mm Aluminum Rigid Coupling | Anodized Blue
45,00 EGP- 🔩 Aluminum rigid shaft coupling (5mm × 5mm)
- 🔵 Anodized blue finish—durable and corrosion resistant
- ⚙️ Connects two 5mm shafts for direct power transfer
- 🧱 Rigid design for strong, precise torque transmission
- 🛠️ Dual set-screws for secure, anti-slip mounting
- 📏 Helps maintain alignment in motion/control systems
- 🧩 Ideal for CNC, 3D printers, robotics, and automation
- ✅ Perfect for motor-to-shaft couplings in DIY builds
5x8mm Aluminum Rigid Coupling | Anodized Blue
35,00 EGP- 🔩 Aluminum rigid shaft coupling (5mm × 8mm)
- 🔵 Anodized blue finish—durable and corrosion resistant
- ⚙️ Connects 5mm motor shaft to 8mm lead screw/shaft
- 🧱 Rigid design for strong, precise power transfer
- 🛠️ Dual set-screws for secure, anti-slip mounting
- 📏 Helps keep alignment in CNC and motion systems
- 🧩 Ideal for CNC, 3D printers, robotics, and automation
- ✅ Great for coupling stepper motors with drive shafts
5x8MM Flexible Shaft Coupler
60,00 EGP- 🔩 Flexible shaft coupler (5mm × 8mm)
- 🌀 Flex design reduces misalignment and vibration
- ⚙️ Connects 5mm motor shaft to 8mm lead screw/shaft
- 💪 Helps protect motor bearings from stress
- 🛠️ Secure set-screw clamping for firm grip
- 📏 Smooth torque transfer with less noise
- 🧩 Ideal for CNC, 3D printers, robotics, and linear motion
- ✅ Great choice for lead screw coupling applications
6 Position DIP Switch
8,00 EGP- 6 individual ON/OFF toggle switches
- Standard 2.54mm (0.1″) pitch DIP layout
- Through-hole mounting design
- Voltage rating: 12–24V DC
- Current rating: 25–50mA
- Contact resistance ≤100Ω, insulation ≥100MΩ
- Ideal for device addressing, mode selection, and feature control
6.8k ohm 1/4 Watt
0,25 EGP- Resistance: 6.8k Ohm
- Power Rating: 1/4 Watt (0.25W)
- Tolerance: ±5%
- Material: Carbon Film / Metal Oxide
- Temperature Coefficient: ±100ppm/°C
- Mounting Type: Through-hole
- Application: Suitable for low to medium-voltage circuits
65mm Robot Wheel for BO Motors (Yellow)
30,00 EGP✅ 65mm diameter for stable movement
✅ Rubberized outer layer for better friction
✅ Easy fit with BO motors
✅ Ideal for beginners and hobbyist robots
680 ohm 1/2 Watt
0,25 EGP- Precision: Accurate 680 ohm resistance for stable circuit operation.
- Power Rating: 1/2 Watt, suitable for moderate power applications.
- Versatile: Ideal for use in DIY projects, audio circuits, power supplies, and more.
- Durable: High-quality construction ensures reliable performance over time.
- Compact: Perfect for breadboard setups and PCB designs in tight spaces.
