Shop
Brand
Stepper Motor 5V
70,00 EGP- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm
Stereo Jack Male 3.5mm 3 Pole Audio Connector
45,00 EGP- 🎧 3.5mm stereo male audio jack (3-pole TRS)
- 🔊 Supports Left / Right audio + Ground connection
- 🧩 Ideal for headphones, speakers, AUX cables, DIY audio
- 🛠️ Easy solder terminals for quick wiring and repairs
- 🔌 Universal compatibility with 3.5mm stereo ports
- 📦 Compact, durable connector for portable projects
- 🛡️ Stable contact for clear audio and less noise
- ✅ Perfect for making custom audio leads and adapters
STM32F103C8T6 32-Bit ARM Development Board
250,00 EGP-
Powered by STM32F103C8T6 ARM Cortex-M3 microcontroller
-
72 MHz clock speed for high-performance tasks
-
64KB Flash and 20KB SRAM memory
-
Supports USART, SPI, I2C, ADC (12-bit), PWM, USB
-
Up to 37 I/O pins with alternate functions
-
Mini USB port for programming via built-in bootloader
-
Programmable using STM32CubeIDE, Arduino IDE (STM32 core), PlatformIO
-
Supports in-circuit programming/debugging via ST-Link V2
STM32F401RCT6 – STM32 Development Board (The Black Pill)
350,00 EGPProduct Highlights
- High-Performance Core: ARM Cortex-M4 32-bit RISC core operating at 84 MHz.
- Memory Power: 256KB Flash memory and 64KB SRAM for complex embedded applications.
- Modern Connectivity: Integrated USB Type-C for both power and high-speed data.
- Hardware Acceleration: Built-in Floating Point Unit (FPU) for fast mathematical calculations.
- Breadboard Friendly: Compact “Black Pill” design with a dual-row 40-pin layout.
- RTC Ready: Onboard 32.768kHz low-speed crystal for real-time clock applications.
Strong Neodymium Magnets Bar, 30x10x5mm
15,00 EGP- 🧲 Strong neodymium bar magnets
- 📏 Size: 30 × 10 × 5 mm
- 💪 High holding force for fixing and mounting tasks
- 🔩 Ideal for DIY projects, fixtures, and tool organization
- 🧩 Great for sensors/encoders and magnetic mechanisms
- 🛡️ Nickel-coated surface for corrosion resistance (common type)
- 📦 Compact bar shape—easy to place in tight spaces
- ✅ Perfect for workshop, crafts, and electronics builds
TCRT5000L 5 Channel Tracking Sensor Tracking Module Infrared Sensor
180,00 EGP- 🧭 TCRT5000L 5-channel infrared tracking sensor module
- 🔦 5 IR reflective sensors for accurate line tracking
- 📏 Great for detecting black/white lines and edges
- ⚡ Works with 3.3V/5V controllers (module dependent)
- 🎛️ Adjustable sensitivity via onboard potentiometers (common design)
- 🤖 Ideal for line follower robots and smart car projects
- 🛠️ Easy interface with digital outputs to Arduino/MCU pins
- ✅ Perfect for robotics competitions and DIY tracking builds
TCS3200 Color Sensor Module
400,00 EGP-
Based on TCS3200 color light-to-frequency converter IC
-
Converts light intensity into a square wave signal
-
Supports programmable color detection (RGB + clear)
-
Directly compatible with Arduino, Raspberry Pi, and microcontrollers
-
Offers high-resolution and stable output
-
Includes power-down mode for energy efficiency
-
Built-in photodiodes with selectable filters
⚠️ Note: Shipped as either GY-31 or HW-531 (same functionality)
TDA2030A 6-12V 18W Audio Amplifier Module
55,00 EGP- Based on TDA2030A high-performance audio amplifier IC
- Mono channel output delivering up to 18W of clear audio power
- Low harmonic distortion for high-quality sound reproduction
- Includes horn/speaker socket for easy connection
- 10K adjustable potentiometer for volume control
- Onboard power indicator LED
- Supports 6V–12V DC input power supply
- Ideal for DIY audio projects, speakers, and embedded audio systems
TDS Sensor V1.0 Water Quality Meter Module – Arduino Compatible, Liquid Total Dissolved Solids Measurement
500,00 EGP- Measures Total Dissolved Solids (TDS) in water
- Analog Output compatible with Arduino UNO and other boards
- Detects Water Purity for aquariums, hydroponics, and filtration systems
- Wide Voltage Range (3.3V–5V) for flexible use
- Easy-to-Use Probe with waterproof connector for reliable readings
Temperature Control Switch Module W1209
120,00 EGPThe W1209 is a highly versatile, incredibly compact, and cost-effective 12V digital temperature controller module. Featuring a 3-digit LED display, onboard microcontroller, and an included waterproof NTC sensor, it is the perfect solution for DIY incubation, cooling systems, smart home automation, and custom thermal regulation projects.
Terminal Block 2Pin 3.5mm Pitch
3,50 EGP- Compact 2-pin terminal block – Ideal for saving space on PCBs
- Side-entry screw terminals – Easy wire insertion and secure connections
- Wide Compatibility – Accepts 24–18 AWG wire sizes
- Reliable Power Handling – Supports up to 300V and 10A
- 3.5mm Pitch – Standard spacing for common PCB layouts
- Safe Design – Plastic-coated conductors prevent accidental contact
- Durable Build – Withstands temperatures from -40ºC to +150ºC
- Easy to Solder – Through-hole mounting for strong PCB connection
