Shop
TCRT 5000 Dual Channel Line Tracking Sensor Module
40,00 EGP- Operating Voltage: 3.5V-5V
- Supply Current: 15mA
- Optimal Sensing Distance: 3mm
- Designed with the reflected infrared sensor, indicator light.
- Built in a potentiometer for sensitivity control.
- On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
- Signal detection sensitivity can adjust
- Reserve all the way more circuits (P3 voltage drawn)
TCRT5000 Reflective IR sensor photoelectric switch-5pcs
150,00 EGP- 🔦 TCRT5000 reflective IR sensor set (5 pcs)
- 📡 Detects reflectivity changes for line/edge sensing
- 🧩 Ideal for line follower robots and object detection
- ⚡ Works with 3.3V/5V systems (with proper circuit/module)
- 📈 Analog or digital output (depends on board/circuit)
- 🛠️ Easy to integrate on PCB or DIY sensor modules
- 📦 Pack of 5—great value for multi-sensor projects
- ✅ Perfect for Arduino, ESP32, and robotics experiments
TCRT5000L 5 Channel Tracking Sensor Tracking Module Infrared Sensor
180,00 EGP- 🧭 TCRT5000L 5-channel infrared tracking sensor module
- 🔦 5 IR reflective sensors for accurate line tracking
- 📏 Great for detecting black/white lines and edges
- ⚡ Works with 3.3V/5V controllers (module dependent)
- 🎛️ Adjustable sensitivity via onboard potentiometers (common design)
- 🤖 Ideal for line follower robots and smart car projects
- 🛠️ Easy interface with digital outputs to Arduino/MCU pins
- ✅ Perfect for robotics competitions and DIY tracking builds
TCS230 Color Recognition Sensor Module
470,00 EGP- Uses TCS3200 color light-to-frequency IC
- Outputs square wave proportional to light intensity
- High-resolution color detection with programmable filters
- 50% duty cycle, frequency-based output
- Compatible with Arduino, Raspberry Pi, and microcontrollers
- Supports power-down mode for energy saving
- Compact module, easy to integrate in color recognition projects
- Variant: GY-31 or HW-531 (shipped randomly)
TCS3200 Color Sensor Module
400,00 EGP-
Based on TCS3200 color light-to-frequency converter IC
-
Converts light intensity into a square wave signal
-
Supports programmable color detection (RGB + clear)
-
Directly compatible with Arduino, Raspberry Pi, and microcontrollers
-
Offers high-resolution and stable output
-
Includes power-down mode for energy efficiency
-
Built-in photodiodes with selectable filters
⚠️ Note: Shipped as either GY-31 or HW-531 (same functionality)
TCS34725 RGB Color Sensor Module
Original price was: 390,00 EGP.250,00 EGPCurrent price is: 250,00 EGP.- TCS34725 sensor – 16-bit RGB + Clear light detection
- Built-in IR filter – accurate human-eye-like color sensing
- Onboard white LED – consistent illumination under varying light
- I2C interface – easy integration with Arduino, Raspberry Pi, ESP32
- Works with 3.3V & 5V systems
- Ideal for color recognition, sorting, ambient light sensing
- Includes INT pin for interrupt-based detection
TDA2030A 6-12V 18W Audio Amplifier Module
55,00 EGP- Based on TDA2030A high-performance audio amplifier IC
- Mono channel output delivering up to 18W of clear audio power
- Low harmonic distortion for high-quality sound reproduction
- Includes horn/speaker socket for easy connection
- 10K adjustable potentiometer for volume control
- Onboard power indicator LED
- Supports 6V–12V DC input power supply
- Ideal for DIY audio projects, speakers, and embedded audio systems
TDS Sensor V1.0 Water Quality Meter Module – Arduino Compatible, Liquid Total Dissolved Solids Measurement
750,00 EGP- Measures Total Dissolved Solids (TDS) in water
- Analog Output compatible with Arduino UNO and other boards
- Detects Water Purity for aquariums, hydroponics, and filtration systems
- Wide Voltage Range (3.3V–5V) for flexible use
- Easy-to-Use Probe with waterproof connector for reliable readings
TEA5767 Stereo FM Radio Module with Detachable Antenna
650,00 EGP- 📻 TEA5767 stereo FM radio receiver module
- 📡 Detachable antenna for improved reception
- 🚌 I2C control interface—easy tuning via microcontroller
- 🎧 Stereo audio output for clear sound
- 📶 Covers standard FM broadcast band (module dependent)
- 🧩 Ideal for DIY radios, audio projects, and smart receivers
- ⚡ Low power operation for portable builds
- ✅ Works well with Arduino, ESP32, STM32 projects
TEC1-12703 30x30mm Thermoelectric Cooler 3A Peltier Module
175,00 EGP- ❄️ TEC1-12703 thermoelectric (Peltier) cooler module
- 📏 Size: 30 × 30 mm compact cooling plate
- ⚡ Rated current: up to 3A (typical use depends on supply)
- 🔋 Works with DC power for heating/cooling (polarity reversible)
- 🧊 Ideal for mini coolers, temperature experiments, and DIY projects
- 🛠️ Requires good heatsink + fan for best performance
- 🌡️ Useful for temperature control with thermistors/thermocouples
- ✅ Great for electronics cooling and lab demonstrations
Terminal Block 2Pin 3.5mm Pitch
3,50 EGP- Compact 2-pin terminal block – Ideal for saving space on PCBs
- Side-entry screw terminals – Easy wire insertion and secure connections
- Wide Compatibility – Accepts 24–18 AWG wire sizes
- Reliable Power Handling – Supports up to 300V and 10A
- 3.5mm Pitch – Standard spacing for common PCB layouts
- Safe Design – Plastic-coated conductors prevent accidental contact
- Durable Build – Withstands temperatures from -40ºC to +150ºC
- Easy to Solder – Through-hole mounting for strong PCB connection
Terminal Block 3Pin 3.96mm Pitch
5,00 EGP- 3.96mm pitch, 3-pin screw terminal
- Rated for 10A / 300V
- Accepts 18–24 AWG wires
- Through-hole, straight pin mount
- -40℃ to +105℃ temperature range
TF MINI 12MM LIDAR
2.550,00 EGP- 📡 TF Mini LiDAR distance sensor (12mm size)
- 📏 Accurate distance measurement using laser ranging
- ⚡ Fast response—great for real-time obstacle detection
- 🚌 Supports UART/I2C communication (model dependent)
- 🤖 Ideal for drones, robots, mapping, and collision avoidance
- 📦 Compact 12mm form factor—easy to mount in tight spaces
- 🔋 Low power operation for portable applications
- ✅ Reliable ranging sensor for embedded and IoT projects
Thermistor NTC 12 Ohm 20% 2-Pin
10,00 EGP- Negative Temperature Coefficient (NTC) for temperature sensing
- 12 Ohm Resistance at 25°C with ±20% tolerance
- 2-Pin Design for easy PCB or through-hole mounting
- Responsive to Temperature Changes for thermal protection and monitoring
- Ideal for Power Supplies, Chargers, and Temperature Control Circuits
TI LaunchPad Tiva C “EK-TM4C123GXL” Evaluation Kit
Original price was: 2.350,00 EGP.2.200,00 EGPCurrent price is: 2.200,00 EGP.✅ Cortex-M4F with FPU, 80 MHz
✅ 256 KB flash, 32 KB SRAM
✅ Multiple comm interfaces (UART, SPI, I2C, USB, CAN)
✅ Onboard debug/program with ICDI
✅ Compatible with BoosterPacks for extended functionality
Tip120 NPN, 60V, 65W, 5A, Medium Power Darlington Power Transistor
5,00 EGP- 🔌 TIP120 NPN medium-power Darlington transistor
- 💪 Current rating: up to 5A (with proper heatsink)
- ⚡ Voltage rating: 60V
- 🔥 Power dissipation: up to 65W (requires heatsinking)
- 🧩 Ideal for driving motors, relays, solenoids, and LEDs
- 🔁 High gain Darlington pair—easy to drive from Arduino/MCU
- 🛠️ TO-220 package for easy mounting and cooling
- ✅ Great for low-side switching and power control circuits
TIP121 NPN 80V,65W,5A Darlington Power Transistor
10,00 EGP✅ NPN Darlington Transistor
✅ 80V / 5A / 65W Rated
✅ Ultra-high gain (hFE ~1000)
✅ Low base drive required
✅ Ideal for switching, audio, and control applications
TIP122 Silicon NPN Power Darlington Transistor ( 5A , 100V , 65W ) .
15,00 EGP- 🔌 TIP122 silicon NPN power Darlington transistor
- 💪 Current rating: up to 5A
- ⚡ Voltage rating: 100V
- 🔥 Power dissipation: up to 65W (with proper heatsink)
- 🧩 Ideal for driving relays, motors, solenoids, and high-power LEDs
- 🔁 High gain Darlington pair—easy to drive from Arduino/MCU
- 🛠️ TO-220 package for easy mounting and cooling
- ✅ Great for low-side switching and power control circuits
