Shop
Brand
FTDI FT232RL USB to TTL Converter Module
155,00 EGP-
Based on reliable FTDI FT232RL chipset
-
Converts USB to 3.3V or 5V TTL serial signals
-
Selectable VCC output (3.3V / 5V) via jumper or solder pads
-
Standard 6-pin interface: DTR, RX, TX, VCC, CTS, GND
-
Supports auto-reset for Arduino boards (via DTR)
-
High-speed data rate up to 3 Mbps
-
Compatible with Windows, macOS, and Linux
-
Integrated USB Type-A / Mini / Micro USB (varies by version)
-
Compact and easy-to-use design
FunDuino UNO (ATMega 328P board compatible with Arduino Uno) (Arduino Compatible)
650,00 EGP-
ATmega328P Microcontroller fully compatible with Arduino UNO
-
USB Interface (CH340 or FTDI) for easy PC connection
-
14 Digital I/O Pins, 6 Analog Inputs, PWM support
-
Standard Arduino UNO Form Factor for shield compatibility
-
Ideal for Beginners, Prototyping, and Educational Use
Fuse Holder ( External for T5x20 Size)
10,00 EGP- Houses standard 5×20mm glass fuses – supports fast, reliable fuse replacement
- Inline/external design – ideal for DC circuits, automotive, and DIY builds
- Secure screw-lock cap – keeps fuse firmly in place during operation
- Durable plastic body – offers excellent insulation and protection
- Supports up to 10A / 250V – check fuse rating for exact limits
- Easy wiring – solder or crimp terminals for custom installations
General Purpose Relay SPDT (1 Form C) 12VDC Coil 10A Through Hole 5 Pin
15,00 EGP- Type: SPDT (Single Pole Double Throw) / 1 Form C.
- Coil Voltage: 12V DC.
- Contact Rating: 10A @ 250VAC or 30VDC.
- Pins: 5-pin through-hole for PCB mounting.
- Compact Design: ~28 x 12.5 x 15 mm size.
- Fast Response: ≤10 ms operation, ≤5 ms release time.
- Durable: High insulation resistance and reliable performance.
- Versatile Use: Ideal for automotive, industrial, and home automation.
General Purpose Relay SPDT (1 Form C) 24VDC Coil 10A Through Hole 5 Pin
15,00 EGP- 🔁 SPDT relay (1 Form C): NO/NC changeover contact
- ⚡ 24VDC coil for industrial/control circuits
- 💪 High switching capacity: up to 10A
- 🔌 5-pin through-hole package for easy PCB mounting
- 🧩 Ideal for Arduino/PLC control with driver transistor
- 🏠 Switches loads like lamps, motors, solenoids, and pumps
- 🛡️ Provides electrical isolation between control & load
- ✅ Reliable general-purpose relay for automation projects
General Purpose Relay SPDT (1 Form C) 5VDC Coil 10A Through Hole 5 Pin
12,00 EGP-
SPDT (Single Pole Double Throw) configuration – 1 Form C
-
5V DC coil – compatible with Arduino, ESP32, Raspberry Pi
-
Handles up to 10A current for AC/DC loads
-
5-pin through-hole design – easy for PCB integration
-
Compact, sealed plastic housing for durability
-
Suitable for switching lights, motors, fans, and more
-
Reliable, low-resistance contacts for consistent operation
Glass Fuse 3A – 250V (Size T5x20mm)
1,00 EGP- Rated 3A / 250V AC – ideal for standard AC protection
- Fast-blow fuse – quickly reacts to overcurrent conditions
- 5×20mm glass body – compact and industry-standard size
- Clear glass tube – easy to inspect fuse status visually
- Nickel-plated brass caps – excellent conductivity and corrosion resistance
- Fits standard fuse holders – compatible with 5×20mm mounts
- Reliable protection – for power supplies, chargers, appliances, and more
- General-purpose use – DIY, repair, and embedded circuit safety
Gripper – Robot Mechanical Arm Aluminum Metal Claws
Original price was: 370,00 EGP.350,00 EGPCurrent price is: 350,00 EGP.- The degree of Freedom (DOF): 2
- Paw material: aluminum alloy
- Paw weight: about 68g (without motor)
- Claws overall length: 108mm (overall maximum length when closed paw)
- Claws overall width: 98mm (maximum overall width of the paw when open)
- Paw maximum opening angle: 55mm
GSM/GPRS/3G PCB Antenna with IPEX Connector (15cm, 3dBi) for SIM800/Sim908/Sim900 (1520)
40,00 EGP- Name: 2G 3G IPEX antenna
- Connector type: ipx13
- Gain definition: 3dBi (Typical)
- Frequency band definition: 1710
2170MHz 800960 - Impedance definition: 50 ohm
- Total length: as shown in Figure
- Impedance 50 Ohm
GUVA-S12SD Analog UV Light Sensor Module (240–370 nm)
120,00 EGP- Detects UV radiation in the 240–370 nm range (UVA & UVB)
- Analog output proportional to UV intensity
- Built-in operational amplifier for signal boosting
- Compatible with 3.3V and 5V systems (operating range: 2.5V–5V)
- High sensitivity, accuracy, and long-term stability
- Low power consumption – ideal for portable devices
- Compact form factor: 11mm × 27mm
- Suitable for UV index monitoring, environmental sensing, and wearables
GY-213V HDC1080 Digital Humidity
195,00 EGP- High accuracy and stability for humidity measurement
- Low power consumption, suitable for battery-operated devices
- Easy integration with various microcontrollers via I2C interface
- Compact size for easy embedding in different applications
- Built-in temperature compensation for accurate humidity readings
GY-271 HMC5883L Triple Axis Magnetometer Sensor Module
150,00 EGP
- 3-axis magnetic electronic compass.
- Precise heading information.
- Operating Voltage: 3 -5 V DC.
- Driver Chip: HMC5883L.
- Communication: I2C protocol.
- Measuring range: ± 1.3-8 Gauss.
