Shop
Brand
F/F – 30cm Female to Female 1 Jumper Wire
1,50 EGP- 📏 Extended 30cm length – perfect for spaced-out circuits
- 🔗 Female-to-Female connectors – fits standard 2.54mm male headers
- ⚙️ Ideal for Arduino, Raspberry Pi, and breadboards
- 🔁 Durable, reusable, and easy to connect – no soldering needed
- 🧪 Great for prototyping, testing, and educational use
- 🔋 Flexible PVC insulation with copper conductors
Female 2.1 × 5.5mm DC Power Jack Adapter Connector Plug
10,00 EGP- It is a perfect solution for those who want to make custom power cable.
- This CCTV Camera DC Power Connector will provide a great connection.
- The internal diameter of the plug: 2.1mm
- The external diameter of the plug: 5.5mm
Female Banana Plug Short (4 mm) , Black Color
5,00 EGP- 4mm female banana plug
- Compact short design
- Red color for easy identification
- Reliable and durable construction
- Compatible with standard banana jacks
Female Banana Plug Short (4 mm) , Red Color
5,00 EGP- 4mm female banana plug
- Short and compact design
- Red for easy polarity identification
- Durable and reliable for frequent use
- Compatible with standard banana connectors
Flex Sensor 5.6 cm (Detect Bending Motion)
750,00 EGP-
5.6 cm length flexible sensor
-
Resistance varies with bending angle (approx. 10 kΩ flat)
-
Easy to interface with microcontrollers
-
Durable and responsive to motion
-
Ideal for motion and gesture detection
Flux JYD Soldering Paste 150G
25,00 EGP- Strong, clean, and reliable solder joints
- Neutral pH (7 ± 0.3), non-corrosive and safe
- Low-residue formula – no cleaning needed
- Excellent insulation and heat transfer
- Long shelf life – won’t dry out easily
- Ideal for electronics, PCB repair, and fine-pitch soldering
Frequency Adjustable Pulse Generator Module NE555
35,00 EGP- Input Voltage: 5V-15VDC
- Output amplitude: 4.2V V-PP to 11.4V V-PP.
- Output Current : 15mA for 5V & 35mA for 12V.
- Color: Blue
- Working voltage: 5-12V
- Size: 25x 13 x 12 mm (LxWxH)
- Minimum – 50% duty cycle, 3.7 Hz & Maximum – 98% duty cycle, 1.3KHz
FTDI FT232RL USB to TTL Converter Module
155,00 EGP-
Based on reliable FTDI FT232RL chipset
-
Converts USB to 3.3V or 5V TTL serial signals
-
Selectable VCC output (3.3V / 5V) via jumper or solder pads
-
Standard 6-pin interface: DTR, RX, TX, VCC, CTS, GND
-
Supports auto-reset for Arduino boards (via DTR)
-
High-speed data rate up to 3 Mbps
-
Compatible with Windows, macOS, and Linux
-
Integrated USB Type-A / Mini / Micro USB (varies by version)
-
Compact and easy-to-use design
FTDI FT232RL USB to TTL Converter Module TYPE-C USB
150,00 EGP- FT232RL chipset – reliable USB-to-serial communication
- USB Type-C connector – reversible, modern design
- Supports 3.3V / 5V logic (selectable)
- Breakout pins: TX, RX, VCC, GND, CTS, DTR
- Plug-and-play on Windows, macOS, Linux
- Ideal for Arduino, ESP8266/ESP32, STM32
- Perfect for firmware flashing, serial debugging
FunDuino UNO (ATMega 328P board compatible with Arduino Uno) (Arduino Compatible)
650,00 EGP-
ATmega328P Microcontroller fully compatible with Arduino UNO
-
USB Interface (CH340 or FTDI) for easy PC connection
-
14 Digital I/O Pins, 6 Analog Inputs, PWM support
-
Standard Arduino UNO Form Factor for shield compatibility
-
Ideal for Beginners, Prototyping, and Educational Use
Fuse Holder ( External for T5x20 Size)
10,00 EGP- Houses standard 5×20mm glass fuses – supports fast, reliable fuse replacement
- Inline/external design – ideal for DC circuits, automotive, and DIY builds
- Secure screw-lock cap – keeps fuse firmly in place during operation
- Durable plastic body – offers excellent insulation and protection
- Supports up to 10A / 250V – check fuse rating for exact limits
- Easy wiring – solder or crimp terminals for custom installations
General Purpose Relay SPDT (1 Form C) 12VDC Coil 10A Through Hole 5 Pin
15,00 EGP- Type: SPDT (Single Pole Double Throw) / 1 Form C.
- Coil Voltage: 12V DC.
- Contact Rating: 10A @ 250VAC or 30VDC.
- Pins: 5-pin through-hole for PCB mounting.
- Compact Design: ~28 x 12.5 x 15 mm size.
- Fast Response: ≤10 ms operation, ≤5 ms release time.
- Durable: High insulation resistance and reliable performance.
- Versatile Use: Ideal for automotive, industrial, and home automation.
