Shop
PIC18F452-I/P
350,00 EGP- 8-bit PIC18F core @ 40MHz (10 MIPS)
- 32KB Flash, 1.5KB SRAM, 256B EEPROM
- 10-bit ADC with 8 channels
- SPI, I²C, USART, PWM support
- DIP-40 through-hole package
PICkit3 Debugger Programmer Emulator Controller Development Board
2.200,00 EGP- Full-speed USB support using Windows standard drivers
- Real-time execution
- Processors run at maximum speeds
- Built-in over-voltage/short circuit monitor
- Low voltage to 5V (1.8 to the 5V range)
- Read/write program and data memory of the microcontroller
- Program up to 512K byte flash.
piezo sensor-Gold
30,00 EGP- High Sensitivity: Accurately detects vibrations, pressure, or impacts.
- Gold-Plated Electrodes: Enhanced conductivity and corrosion resistance for reliable performance.
- Wide Frequency Response: Ideal for applications in sound and vibration detection.
- Compact & Durable: Thin, flexible design with long operational life.
- Versatile Use: Suitable for musical instruments, alarms, medical devices, and industrial monitoring.
Pin Headers Female 2.54mm : 40-Pin, Straight, Black, 11mm
5,50 EGP-
40-pin single-row female header – easily cut to length
-
Standard 2.54mm (0.1″) pitch – fits most PCBs and breadboards
-
Straight vertical mounting for secure connections
-
11mm height – provides extra clearance for tall components
-
Durable black thermoplastic housing
-
Compatible with Arduino, Raspberry Pi, ESP32, and more
-
Ideal for shields, expansion boards, and prototyping
Pin Headers Male 2.54mm : 40-Pin, Straight, Black, 11mm
5,50 EGP-
40-pin male header strip – can be cut to custom lengths
-
Straight pins for vertical mounting on PCBs or breadboards
-
Standard 2.54mm pitch – compatible with Arduino, Raspberry Pi, etc.
-
11mm pin length for secure connections
-
Durable plastic spacer for alignment and soldering ease
-
Ideal for DIY electronics, shields, and module interfacing
PIR Motion Sensor Detector Module HC-SR501
75,00 EGP-
Passive Infrared sensor with control circuit
-
Adjustable sensitivity (3m to 7m) and hold time (5s to 200s)
-
Default blockade time: 2.5 seconds
-
Compact and easy to use
PL2303 USB to TTL Converter Module
75,00 EGP- Adopt imported controller PL2303HX, which can stabilize the flash with high speed
- 500mA self-recovery fuse for protection
- Two data transmission indicator can monitor data transfer status in real time
- Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power
- The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside,
- so that the board won’t be burnt down by material shortcut.
- Electrostatic package ensures the board will not be damaged before use
PN532 NFC RFID Read / Write Module V3 Kit
250,00 EGP- Module Size: 42.7mm x 40.4mm x 4mm
- Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI and HSU modes
- Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of last version
- Built in PCB Antenna, with 5cm~7cm communication distance
- On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Work as RFID reader/writer
- Work as 1443-A card or a virtual card
polly Micro Limit Switch SM Short Lever 3A 20×6 mm
10,00 EGP-
Compact Size (20×6 mm) with short actuator lever
-
Rated 3A @ 250VAC/30VDC for moderate-power applications
-
Snap-Action Contacts for precise and reliable actuation
-
Versatile Mounting spots for secured placement
-
Ideal for End-Stops, Safety Switches, and Small Machinery
POT100K Ohm 3Pin 15mm Shaft Potentiometer
7,00 EGP✅ 100K ohm resistance, 3-pin potentiometer
✅ 15mm shaft length for easy manual adjustment
✅ Smooth ~270° rotation
✅ Through-hole mountable
✅ Suitable for analog signal control
POT10K Ohm 3Pin 15mm Shaft Potentiometer
8,00 EGP✅ 10K ohm 3-pin potentiometer
✅ 15mm shaft length for easy handling
✅ Smooth ~270° rotation
✅ Through-hole mounting type
✅ Versatile and widely used component
POT1K Ohm 3Pin 15mm Shaft Potentiometer
8,00 EGP✅ 1K ohm 3-pin potentiometer
✅ 15mm shaft length for easy adjustment
✅ Smooth ~270° rotation
✅ Through-hole mount type
✅ Suitable for low-resistance applications
POT500K Ohm 3Pin 15mm Shaft Potentiometer
7,00 EGP✅ 500K ohm 3-pin potentiometer
✅ 15mm shaft length for easy handling
✅ Smooth rotation, approx. 270°
✅ Through-hole mounting type
✅ Suitable for analog input adjustments
POT5K Ohm 3Pin 15mm Shaft Potentiometer
8,00 EGP✅ 5K ohm 3-pin potentiometer
✅ 15mm shaft length for easy handling
✅ Smooth ~270° rotation
✅ Through-hole mounting
✅ Ideal for low-resistance variable control
Pro Mini ATMEGA328P 5V/16M Blue
Original price was: 240,00 EGP.200,00 EGPCurrent price is: 200,00 EGP.- Based on ATmega328P microcontroller
- Operates at 5V, 16 MHz clock speed
- Compact, small form factor (Blue PCB)
- Compatible with Arduino IDE for easy programming
- Low power consumption, ideal for embedded projects
- Includes RAW and VCC power input pins
Programmer CH341A
400,00 EGP- USB interface
- With CH341A chip
- Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
- With 24/25 status indicator lamp
- Support USB to TTL conversionSupport 24EEPROM and 25 SPI flash 8pin/ 16pin chip
- Recognize 25 series chip automatically
- Supports download STC series procedure of single chip
- SPI pin to support expanding the utility
- STC microcontroller supports a full range of program download
- Support expanding the utility by SPI pin
- With SOP8 SOP16 to DIP8 converter board
PS2 Joystick Module Breakout Sensor
40,00 EGP- Analog joystick with two potentiometers for X and Y axes
- Includes a push-button switch when pressing the joystick down
- Compatible with Arduino, Raspberry Pi, and other microcontrollers
- Easy to interface via analog input pins
- Compact breakout board design with standard pin headers
- Ideal for robot control, game controllers, and navigation projects
Push Button Momentary
10,00 EGP-
Momentary Action: Activates only while pressed
-
Compact Design suitable for breadboards and panels
-
Normally Open (N.O.) Contacts for simple circuit control
-
Durable Plastic and Metal Build for long-lasting use
-
Ideal for DIY Electronics, Reset Switches, and Input Controls
