Shop

Quick view
Add to compare

PCB Single Layer FR2 (10X15 cm2)

25,00 EGP

  • Single-sided copper-clad PCB for custom circuit design

  • Made from FR2 phenolic resin – easy to cut, drill, and shape

  • 10×15 cm² large size – suitable for bigger prototypes

  • Compatible with manual and chemical etching methods

  • 35µm copper thickness for reliable conductivity

  • Ideal for students, hobbyists, and professionals in electronics

Add to cart
Quick view
Add to compare

Perforated holes PCB 13.3 * 4.8CM universal circuit board

25,00 EGP
Add to cart
Quick view
Add to compare

Photo Resistor Sensor LDR 5mm GL5549 80kΩ~150kΩ P=3.4mm

6,00 EGP
  • High sensitivity photoresistor (LDR)
  • Fast 30ms response time
  • 540nm spectral peak
  • 80–150KΩ at 10 Lux light resistance
  • 20MΩ dark resistance
  • Wide temp range: -30℃ to +70℃
  • Epoxy resin sealed for durability
Add to cart
Quick view
Add to compare

Photocell LDR Sensor Switch (ASO-AS-10) 10A

170,00 EGP

  • Dusk-to-dawn automation: LDR turns lights ON at < 30 lux and OFF at > 150 lux

  • Energy saver: Lights run only when needed, cutting power costs

  • 10 A load capacity: Drives up to ≈ 2 200 W of resistive lighting at 220 V AC

  • Anti-interference delay: 10–20 s pause stops false triggers (headlights, lightning)

  • Weatherproof IP44 housing: UV-stable polycarbonate for reliable outdoor use

  • Simple 3-wire hook-up: Live in, neutral, and switched live out

Add to cart
Quick view
Add to compare

PIC16F628A-I/P

100,00 EGP
  • 8-bit PIC microcontroller with 14-bit instruction set
  • Flash memory: 2K words program storage
  • RAM: 224 bytes | EEPROM: 128 bytes
  • Operating speed: up to 20 MHz
  • I/O pins: 16 (with individual direction control)
  • Built-in peripherals: USART, CCP, timers, comparators
  • Operating voltage: 2.0V – 5.5V
  • Package: 18-pin DIP (I/P) for easy prototyping
  • Low-power features with sleep mode
Add to cart
Quick view
Add to compare

PIC16F877A-I/P

220,00 EGP

  1. 8-bit Microchip PIC microcontroller with 14 KB Flash

  2. 368 Bytes RAM and 256 Bytes EEPROM

  3. 10-bit 8-channel ADC

  4. USART, SPI, I2C communication interfaces

  5. Up to 20 MHz clock speed

  6. 40-pin PDIP package suitable for prototyping

Add to cart
Quick view
Add to compare

PIC18F452-I/P

350,00 EGP
  • 8-bit PIC18F core @ 40MHz (10 MIPS)
  • 32KB Flash, 1.5KB SRAM, 256B EEPROM
  • 10-bit ADC with 8 channels
  • SPI, I²C, USART, PWM support
  • DIP-40 through-hole package
Add to cart
New
Quick view
Add to compare

PICkit3 Debugger Programmer Emulator Controller Development Board

2.200,00 EGP
  1. Full-speed USB support using Windows standard drivers
  2. Real-time execution
  3. Processors run at maximum speeds
  4. Built-in over-voltage/short circuit monitor
  5. Low voltage to 5V (1.8 to the 5V range)
  6. Read/write program and data memory of the microcontroller
  7. Program up to 512K byte flash.
Add to cart
Quick view
Add to compare

piezo sensor-Gold

30,00 EGP
  • High Sensitivity: Accurately detects vibrations, pressure, or impacts.
  • Gold-Plated Electrodes: Enhanced conductivity and corrosion resistance for reliable performance.
  • Wide Frequency Response: Ideal for applications in sound and vibration detection.
  • Compact & Durable: Thin, flexible design with long operational life.
  • Versatile Use: Suitable for musical instruments, alarms, medical devices, and industrial monitoring.
Add to cart
Quick view
Add to compare

Pin Headers Female 2.54mm : 40-Pin, Straight, Black, 11mm

5,50 EGP

  • 40-pin single-row female header – easily cut to length

  • Standard 2.54mm (0.1″) pitch – fits most PCBs and breadboards

  • Straight vertical mounting for secure connections

  • 11mm height – provides extra clearance for tall components

  • Durable black thermoplastic housing

  • Compatible with Arduino, Raspberry Pi, ESP32, and more

  • Ideal for shields, expansion boards, and prototyping

Add to cart
Quick view
Add to compare

Pin Headers Male 2.54mm : 40-Pin, Straight, Black, 11mm

5,50 EGP

  • 40-pin male header strip – can be cut to custom lengths

  • Straight pins for vertical mounting on PCBs or breadboards

  • Standard 2.54mm pitch – compatible with Arduino, Raspberry Pi, etc.

  • 11mm pin length for secure connections

  • Durable plastic spacer for alignment and soldering ease

  • Ideal for DIY electronics, shields, and module interfacing

Add to cart
Quick view
Add to compare

PIR Motion Sensor Detector Module HC-SR501

75,00 EGP

  • Passive Infrared sensor with control circuit

  • Adjustable sensitivity (3m to 7m) and hold time (5s to 200s)

  • Default blockade time: 2.5 seconds

  • Compact and easy to use

Add to cart
Quick view
Add to compare

PL2303 USB to TTL Converter Module

75,00 EGP
  1. Adopt imported controller PL2303HX, which can stabilize the flash with high speed
  2. 500mA self-recovery fuse for protection
  3. Two data transmission indicator can monitor data transfer status in real time
  4. Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power
  5. The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside,
  6. so that the board won’t be burnt down by material shortcut.
  7. Electrostatic package ensures the board will not be damaged before use
Add to cart
Quick view
Add to compare

PN532 NFC RFID Read / Write Module V3 Kit

250,00 EGP
  1. Module Size: 42.7mm x 40.4mm x 4mm
  2. Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI and HSU modes
  3. Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of last version
  4. Built in PCB Antenna, with 5cm~7cm communication distance
  5. On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
  6. Work as RFID reader/writer
  7. Work as 1443-A card or a virtual card
Add to cart
Quick view
Add to compare

polly Micro Limit Switch SM Short Lever 3A 20×6 mm

10,00 EGP

  • Compact Size (20×6 mm) with short actuator lever

  • Rated 3A @ 250VAC/30VDC for moderate-power applications

  • Snap-Action Contacts for precise and reliable actuation

  • Versatile Mounting spots for secured placement

  • Ideal for End-Stops, Safety Switches, and Small Machinery

Add to cart
Quick view
Add to compare

POT100K Ohm 3Pin 15mm Shaft Potentiometer

7,00 EGP

✅ 100K ohm resistance, 3-pin potentiometer
✅ 15mm shaft length for easy manual adjustment
✅ Smooth ~270° rotation
✅ Through-hole mountable
✅ Suitable for analog signal control

Add to cart
Quick view
Add to compare

POT10K Ohm 3Pin 15mm Shaft Potentiometer

8,00 EGP

✅ 10K ohm 3-pin potentiometer
✅ 15mm shaft length for easy handling
✅ Smooth ~270° rotation
✅ Through-hole mounting type
✅ Versatile and widely used component

Add to cart
Quick view
Add to compare

POT1K Ohm 3Pin 15mm Shaft Potentiometer

8,00 EGP

✅ 1K ohm 3-pin potentiometer
✅ 15mm shaft length for easy adjustment
✅ Smooth ~270° rotation
✅ Through-hole mount type
✅ Suitable for low-resistance applications

Add to cart
Quick view
Add to compare

POT500K Ohm 3Pin 15mm Shaft Potentiometer

7,00 EGP

✅ 500K ohm 3-pin potentiometer
✅ 15mm shaft length for easy handling
✅ Smooth rotation, approx. 270°
✅ Through-hole mounting type
✅ Suitable for analog input adjustments

Add to cart
Quick view
Add to compare

POT50K Ohm 3Pin 15mm Shaft Potentiometer

6,00 EGP
Add to cart

Ekosta Electronics Egypt

Ekosta Electronics Egypt | Leading Supplier of Arduino, Raspberry Pi, Motor Drivers & Electronics Components | Premium Spare Parts, Industrial Sensors & Robotic Kits | High-Quality Electronics at Competitive Prices | Fast Shipping & Expert Technical Support Across Egypt.

Read More