Shop
Heart Rate Monitor Kit with AD8232 ECG sensor module
Original price was: 450,00 EGP.400,00 EGPCurrent price is: 400,00 EGP.- Measures heart’s electrical activity via ECG (Electrocardiogram)
- Integrated AD8232 chip for signal amplification and filtering
- Outputs analog ECG signal to Arduino or microcontroller
- Includes leads-off detection and shutdown function
- LED blinks with heartbeat rhythm
- 3.5mm jack for biomedical pads
- Suitable for fitness, portable ECG, and remote health applications
- Compact and cost-effective bio-signal acquisition module
- Not a medical-grade device
IMU 9-DOF MPU-9250 9-Axis Attitude Gyroscope Accelerator Magnetometer Sensor Module
Original price was: 725,00 EGP.275,00 EGPCurrent price is: 275,00 EGP.- 6-Axis Sensor: Combines 3-axis gyroscope and 3-axis accelerometer.
- Adjustable Sensitivity: Selectable ranges for both accelerometer and gyroscope.
- I2C Communication: Easy integration with Arduino, Raspberry Pi, and other microcontrollers.
- Low Power Consumption: Ideal for battery-powered applications.
- Compact Size: Easy to mount on various platforms.
- Wide Application Range: Perfect for motion tracking, robotics, drones, and wearable devices.
L298N Motor Driver Module – 2A Dual Channel
Original price was: 95,00 EGP.90,00 EGPCurrent price is: 90,00 EGP.- Logical voltage: 5V
- Drive voltage: 5V-35V
- Logical current: 0-36mA
- Drive current: 2A (max. single bridge)
- Max power: 25W
- Dimensions: 44 x 44 x 28 (LxWxH)mm
- Weight: 26 gm
MG90S Mini Digital 180 Degree Servo 2.2kg
Original price was: 180,00 EGP.160,00 EGPCurrent price is: 160,00 EGP.- 180° rotation with digital precision
- High torque and fast response
- Excellent holding power
- Compact and durable plastic case
- Dust- and splash-resistant
- Standard JR plug (Futaba compatible)
MPU9250 9-Axis Sensor Module – Gyroscope, Accelerometer, and Magnetometer for Robotics, and Wearable Devices
Original price was: 750,00 EGP.725,00 EGPCurrent price is: 725,00 EGP.- Accelerometer, Gyroscope
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- 9 DOF modules
NEO-6M GPS Module with EPROM
Original price was: 450,00 EGP.400,00 EGPCurrent price is: 400,00 EGP.- Based on u-blox NEO-6M GPS chip
- Tracks up to 22 satellites on 50 channels
- High sensitivity: -161 dBm, low power: 45mA
- Built-in 25x25mm ceramic patch antenna
- Default baud rate: 9600
- EEPROM for saving settings & backup battery for faster lock
- TTL UART Interface: TX, RX, VCC, GND
- Supports GPS functions: Position hold, Return-to-Home, Waypoints
- Cold start: 38s, Hot start: 1s
- Compact: 30mm x 23mm module, 3mm mounting holes
- Ideal for drones, robots, navigation projects
Pro Mini ATMEGA328P 5V/16M Blue
Original price was: 240,00 EGP.200,00 EGPCurrent price is: 200,00 EGP.- Based on ATmega328P microcontroller
- Operates at 5V, 16 MHz clock speed
- Compact, small form factor (Blue PCB)
- Compatible with Arduino IDE for easy programming
- Low power consumption, ideal for embedded projects
- Includes RAW and VCC power input pins
Raspberry Pi Pico W
Original price was: 750,00 EGP.700,00 EGPCurrent price is: 700,00 EGP.- RP2040 microcontroller with 2MB of flash memory
- On-board single-band 2.4GHz wireless interfaces (802.11n)
- Micro USB B port for power and data (and for reprogramming the flash)
- 40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
- Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
- 23 GPIO are digital-only, with three also being ADC capable
ST-Link V2 Programmer for STM8/STM32
Original price was: 290,00 EGP.250,00 EGPCurrent price is: 250,00 EGP.-
Supports SWD protocol for STM32 microcontrollers
-
Supports SWIM protocol for STM8 microcontrollers
-
USB interface for easy PC connectivity
-
Compatible with STM32CubeIDE, STVP, ST-Link Utility, Keil, IAR
-
Firmware upgradable for future updates
-
LED status indicator for operation feedback
-
Includes Dupont jumper wires for flexible connections
TCS34725 RGB Color Sensor Module
Original price was: 390,00 EGP.250,00 EGPCurrent price is: 250,00 EGP.- TCS34725 sensor – 16-bit RGB + Clear light detection
- Built-in IR filter – accurate human-eye-like color sensing
- Onboard white LED – consistent illumination under varying light
- I2C interface – easy integration with Arduino, Raspberry Pi, ESP32
- Works with 3.3V & 5V systems
- Ideal for color recognition, sorting, ambient light sensing
- Includes INT pin for interrupt-based detection
UT33D+ Palm Size Multimeter
Original price was: 475,00 EGP.450,00 EGPCurrent price is: 450,00 EGP.-
Measures DC/AC voltage, DC current, and resistance
-
Includes continuity buzzer and diode testing
-
Data hold function for capturing readings
-
Backlit LCD display for clear visibility in low light
-
Built-in overload protection and low battery indicator
-
Palm-sized, lightweight design with rubber protective case
-
CAT II 600V safety rating for general electronics work
VL53L0X Laser Distance Sensor Module Black Version
Original price was: 300,00 EGP.270,00 EGPCurrent price is: 270,00 EGP.- Time-of-Flight (ToF) laser distance measurement for high accuracy
- Range: ~30mm to 2000mm with millimeter precision
- 940nm Class 1 IR laser – eye-safe and reliable in varying light conditions
- Fast response with low power consumption (~20mW)
- I²C interface for easy microcontroller integration
- Compact black PCB for easy mounting in projects
Waterproof Ultrasonic Obstacle Sensor, Sensor with Separate Probe
Original price was: 450,00 EGP.400,00 EGPCurrent price is: 400,00 EGP.-
Measures distance from 250mm to 4500mm
-
Waterproof sensor probe separated from control board (2.5m cable)
-
High accuracy with 40kHz ultrasonic pulses
-
Easy-to-use trigger and echo pins for distance calculation
-
Low voltage and low power consumption
-
Strong anti-jamming capability
-
Suitable for wet and harsh environments
-
Ideal for obstacle avoidance, traffic control, security, and AI applications