- تكلفه فاتورة الكهرباء
- Electrical Energy Consumption
- Parallel and Series Resistor Calculator
- LED Resistor Calculator
- UPS Battery Backup Calculator
- Voltage Divider Calculator
- Resistor Color Code Calculator
- Ohm’s Law Calculator
- Current Divider Calculator
- Number System Conversion Calculator
- Boost Converter Calculator
- MOSFET Threshold Voltage Calculator
- Apparent Power Calculator (kVA & VA)
- 555 Timer Calculator
- Buck Converter Calculator
- Capacitors in Series or Parallel Calculator
- Low Pass Filter Calculator
- RMS Voltage Calculator
- Universal Data Converter
- RMS Voltage Calculator
- Capacitor Code Converter
- Series Inductors Calculator
Shop
Showing 241–260 of 483 results
ESP32 Development Board CH9102X WiFi+Bluetooth
Original price was: 400,00 EGP.350,00 EGPCurrent price is: 350,00 EGP.- Ultra-low-power management.
- 4 MB Flash.
- Current: 80 mA.
- Supply Voltage: 3.0 V ~ 3.6 V.
- Data Rate: 150 Mbps.
- Frequency: 2.4 GHz.
ESP32-CAM-WROVER Dual-Core WiFi Module with Camera
750,00 EGP- Built-in ESP32 Dual-Core WiFi + Bluetooth
- Includes OV2640 2MP Camera
- Supports image streaming & face detection
- Ultra-low-power design
- No microSD card slot
- Compatible with Arduino IDE & ESP-IDF
- Ideal for IoT, AI vision, and surveillance projects
ESP8266 NodeMCU CP2102 Board
Original price was: 275,00 EGP.220,00 EGPCurrent price is: 220,00 EGP.- ESP8266 Wi-Fi microcontroller with 4MB flash
- Built-in CP2102 USB-to-serial converter
- Supports Arduino IDE and Lua scripting
- 3.3V logic with onboard voltage regulator
- Multiple GPIO pins with PWM, I2C, SPI
- Compact and easy to program via USB
Etching Solution Acid (125mL)
40,00 EGPReady-to-use etching acid for copper-clad PCB boards
Delivers clean and effective copper removal
Suitable for DIY electronics, prototyping, and metal etching
Compact 125mL sealed plastic bottle
Easy to handle and store with proper safety precautions
Also usable for artistic metal etching applications
EU Power Cable For PC Computer Monitor Printer
25,00 EGPStandard EU Plug compatible with European outlets
3-Pin Connector (C13) fits most PCs, monitors, and printers
Durable & Insulated Cable for safe and reliable power delivery
1.2–1.5 Meter Length (varies by model) for flexible setup
Ideal for Home, Office, and IT Equipment Use
F/F – 10cm Female to Female 1 Jumper Wire
0,75 EGP- Female-to-Female connectors – compatible with 2.54mm male headers
- Length: 10cm – compact and flexible for tight spaces
- Ideal for breadboards and dev boards – Arduino, Raspberry Pi, sensors, modules
- Durable build – copper conductor with strong PVC insulation
- Plug-and-play convenience – no soldering needed
- Reusable and flexible – perfect for rapid prototyping
- Secure grip – solid crimp for reliable connectivity
- Versatile use – great for DIY kits, testing, and learning electronics
F/F – 30cm Female to Female 1 Jumper Wire
1,50 EGP- 📏 Extended 30cm length – perfect for spaced-out circuits
- 🔗 Female-to-Female connectors – fits standard 2.54mm male headers
- ⚙️ Ideal for Arduino, Raspberry Pi, and breadboards
- 🔁 Durable, reusable, and easy to connect – no soldering needed
- 🧪 Great for prototyping, testing, and educational use
- 🔋 Flexible PVC insulation with copper conductors
Female 2.1*5.5mm for DC Power Jack Adapter Connector Plug
10,00 EGP- It is a perfect solution for those who want to make custom power cable.
- This CCTV Camera DC Power Connector will provide a great connection.
- The internal diameter of the plug: 2.1mm
- The external diameter of the plug: 5.5mm
Female Banana Plug Short (4 mm) , Black Color
5,00 EGP- 4mm female banana plug
- Compact short design
- Red color for easy identification
- Reliable and durable construction
- Compatible with standard banana jacks
Female Banana Plug Short (4 mm) , Red Color
5,00 EGP- 4mm female banana plug
- Short and compact design
- Red for easy polarity identification
- Durable and reliable for frequent use
- Compatible with standard banana connectors
Flex Sensor 5.6 cm (Detect Bending Motion)
750,00 EGP5.6 cm length flexible sensor
Resistance varies with bending angle (approx. 10 kΩ flat)
Easy to interface with microcontrollers
Durable and responsive to motion
Ideal for motion and gesture detection
Flux JYD Soldering Paste 150G
25,00 EGP- Strong, clean, and reliable solder joints
- Neutral pH (7 ± 0.3), non-corrosive and safe
- Low-residue formula – no cleaning needed
- Excellent insulation and heat transfer
- Long shelf life – won’t dry out easily
- Ideal for electronics, PCB repair, and fine-pitch soldering
Frequency Adjustable Pulse Generator Module NE555
35,00 EGP- Input Voltage: 5V-15VDC
- Output amplitude: 4.2V V-PP to 11.4V V-PP.
- Output Current : 15mA for 5V & 35mA for 12V.
- Color: Blue
- Working voltage: 5-12V
- Size: 25x 13 x 12 mm (LxWxH)
- Minimum – 50% duty cycle, 3.7 Hz & Maximum – 98% duty cycle, 1.3KHz
FSR402 Round Force Sensor
500,00 EGPForce-sensitive resistor – resistance decreases with applied pressure
12.7mm round sensing area for compact integration
Thin and flexible – fits easily into tight or curved spaces
Compatible with analog input on Arduino, Raspberry Pi, ESP32, etc.
Detects touch, weight, and pressure from ~0.2N to 20N
Fast response time – <1 millisecond activation
FTDI FT232RL USB to TTL Converter Module
155,00 EGPBased on reliable FTDI FT232RL chipset
Converts USB to 3.3V or 5V TTL serial signals
Selectable VCC output (3.3V / 5V) via jumper or solder pads
Standard 6-pin interface: DTR, RX, TX, VCC, CTS, GND
Supports auto-reset for Arduino boards (via DTR)
High-speed data rate up to 3 Mbps
Compatible with Windows, macOS, and Linux
Integrated USB Type-A / Mini / Micro USB (varies by version)
Compact and easy-to-use design
FTDI FT232RL USB to TTL Converter Module TYPE-C USB
150,00 EGP- FT232RL chipset – reliable USB-to-serial communication
- USB Type-C connector – reversible, modern design
- Supports 3.3V / 5V logic (selectable)
- Breakout pins: TX, RX, VCC, GND, CTS, DTR
- Plug-and-play on Windows, macOS, Linux
- Ideal for Arduino, ESP8266/ESP32, STM32
- Perfect for firmware flashing, serial debugging
FunDuino UNO (ATMega 328P board compatible with Arduino Uno) (Arduino Compatible)
650,00 EGPATmega328P Microcontroller fully compatible with Arduino UNO
USB Interface (CH340 or FTDI) for easy PC connection
14 Digital I/O Pins, 6 Analog Inputs, PWM support
Standard Arduino UNO Form Factor for shield compatibility
Ideal for Beginners, Prototyping, and Educational Use
Fuse Holder ( External for T5x20 Size)
10,00 EGP- Houses standard 5×20mm glass fuses – supports fast, reliable fuse replacement
- Inline/external design – ideal for DC circuits, automotive, and DIY builds
- Secure screw-lock cap – keeps fuse firmly in place during operation
- Durable plastic body – offers excellent insulation and protection
- Supports up to 10A / 250V – check fuse rating for exact limits
- Easy wiring – solder or crimp terminals for custom installations
General Purpose Relay SPDT (1 Form C) 12VDC Coil 10A Through Hole 5 Pin
15,00 EGP- Type: SPDT (Single Pole Double Throw) / 1 Form C.
- Coil Voltage: 12V DC.
- Contact Rating: 10A @ 250VAC or 30VDC.
- Pins: 5-pin through-hole for PCB mounting.
- Compact Design: ~28 x 12.5 x 15 mm size.
- Fast Response: ≤10 ms operation, ≤5 ms release time.
- Durable: High insulation resistance and reliable performance.
- Versatile Use: Ideal for automotive, industrial, and home automation.
General Purpose Relay SPDT (1 Form C) 5VDC Coil 10A Through Hole 5 Pin
12,00 EGPSPDT (Single Pole Double Throw) configuration – 1 Form C
5V DC coil – compatible with Arduino, ESP32, Raspberry Pi
Handles up to 10A current for AC/DC loads
5-pin through-hole design – easy for PCB integration
Compact, sealed plastic housing for durability
Suitable for switching lights, motors, fans, and more
Reliable, low-resistance contacts for consistent operation
Ekosta Electronics Egypt
Ekosta Electronics Egypt | Leading Supplier of Arduino, Raspberry Pi, Motor Drivers & Electronics Components | Premium Spare Parts, Industrial Sensors & Robotic Kits | High-Quality Electronics at Competitive Prices | Fast Shipping & Expert Technical Support Across Egypt.