Shop
Brand
5mm White DIP LED
1,00 EGP- Bright white light (5mm DIP)
- Forward Voltage: 3.0–3.4V
- Forward Current: ~20mA
- Viewing Angle: ~30°
- Long life >50,000 hours
- Through-hole 2-pin design
5V 1 Channel Relay Active low
40,00 EGP- The module using Songle relay control.
- AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
- Power indicator (green), relay status indicator light (red).
5V 2 Channel Relay Module
65,00 EGP- The module using Songle relay control.
- AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
- Power indicator (green), Two ways of relay status indicator light (red).
- Using 8550 transistor-driven, strong driving ability.
- Has the fixed bolt hole and easy installation.
5V 2A Adapter – Single Jack
75,00 EGP- 🔌 Original LG charger adapter with single USB output
- ⚡ Output: 5V / 2A for fast, stable charging
- 📱 Compatible with phones, power banks, and USB devices
- 🛡️ Built-in protection: over-current / over-voltage / short-circuit
- 🔥 Safe, reliable performance for daily use
- 📦 Single jack design—simple and compact
- ✨ Like new condition—clean and well maintained
- ✅ Great replacement or spare charger for home/office
5V 2A Power Adapter with DC Plug
75,00 EGP- Provides stable 5V output at 2A
- Comes with standard 5.5×2.1mm DC barrel plug
- Compatible with Arduino, Raspberry Pi, and other devices
- Includes overcurrent and short-circuit protection
- Compact and lightweight design
5V 4 Channel Relay Module
150,00 EGPProduct Highlights
- 4-Channel Independent Control: Manage up to four high-power appliances simultaneously with a single board.
- High Current Capacity: Switches AC loads up to 250V 10A and DC loads up to 30V 10A.
- Universal Compatibility: Direct 5V TTL logic control for Arduino, ESP32, STM32, PIC, and Raspberry Pi.
- Visual Status Indicators: Each channel features a dedicated LED for instant monitoring of relay status.
- Low Driving Current: Efficient design requires only 15–20mA per channel, safe for microcontroller pins.
- Standard Interface: Ready-to-use pin headers for quick wiring in DIY automation and robotics projects.
5V 5A SMPS Power Supply – 25W Switching Adapter
260,00 EGP- 5V DC Output at 5A – delivers 25W of regulated power
- Compact SMPS Design – energy-efficient and lightweight
- Overload, Over-voltage, and Short-circuit Protection
- Wide Input Voltage Support – typically 100–240V AC
- Ideal for Microcontrollers, LED Strips, and USB-Powered Devices
5V Active Buzzer Alarm
10,00 EGP-
5V DC operating voltage – plug-and-play functionality
-
Active buzzer with built-in oscillator – no signal required
-
Produces continuous tone at ~2.5 kHz frequency
-
Sound level: ~85 dB at 10 cm
-
Low current consumption – less than 30mA
-
Compact and lightweight – easy to mount on PCBs or breadboards
-
Ideal for alarms, alerts, and audio notifications
5x5mm Aluminum Rigid Coupling | Anodized Blue
45,00 EGP- 🔩 Aluminum rigid shaft coupling (5mm × 5mm)
- 🔵 Anodized blue finish—durable and corrosion resistant
- ⚙️ Connects two 5mm shafts for direct power transfer
- 🧱 Rigid design for strong, precise torque transmission
- 🛠️ Dual set-screws for secure, anti-slip mounting
- 📏 Helps maintain alignment in motion/control systems
- 🧩 Ideal for CNC, 3D printers, robotics, and automation
- ✅ Perfect for motor-to-shaft couplings in DIY builds
5x8mm Aluminum Rigid Coupling | Anodized Blue
35,00 EGP- 🔩 Aluminum rigid shaft coupling (5mm × 8mm)
- 🔵 Anodized blue finish—durable and corrosion resistant
- ⚙️ Connects 5mm motor shaft to 8mm lead screw/shaft
- 🧱 Rigid design for strong, precise power transfer
- 🛠️ Dual set-screws for secure, anti-slip mounting
- 📏 Helps keep alignment in CNC and motion systems
- 🧩 Ideal for CNC, 3D printers, robotics, and automation
- ✅ Great for coupling stepper motors with drive shafts
5x8MM Flexible Shaft Coupler
60,00 EGP- 🔩 Flexible shaft coupler (5mm × 8mm)
- 🌀 Flex design reduces misalignment and vibration
- ⚙️ Connects 5mm motor shaft to 8mm lead screw/shaft
- 💪 Helps protect motor bearings from stress
- 🛠️ Secure set-screw clamping for firm grip
- 📏 Smooth torque transfer with less noise
- 🧩 Ideal for CNC, 3D printers, robotics, and linear motion
- ✅ Great choice for lead screw coupling applications
6 Position DIP Switch
8,00 EGP- 6 individual ON/OFF toggle switches
- Standard 2.54mm (0.1″) pitch DIP layout
- Through-hole mounting design
- Voltage rating: 12–24V DC
- Current rating: 25–50mA
- Contact resistance ≤100Ω, insulation ≥100MΩ
- Ideal for device addressing, mode selection, and feature control
