Semiconductor ICs
7474 Dual D Flip-Flop
20,00 EGP- Contains two independent D-type flip-flops
- Features asynchronous preset and clear inputs
- Positive-edge triggered clock input
- Standard TTL logic level compatible
- Used in data storage, registers, and timing circuits
7476 Dual JK Flip-Flop with Preset and Clear
18,00 EGP- Contains two independent JK flip-flops
- Features asynchronous preset and clear inputs
- Operates on standard TTL logic levels
- Edge-triggered on clock input
- Commonly used in counters, registers, and memory circuits
7483 4-bit Binary Full Adder
22,00 EGP- Performs 4-bit binary addition with carry input/output
- High-speed arithmetic operation
- TTL logic level compatible
- Used in digital calculators, ALUs, and arithmetic circuits
- Can be cascaded for wider bit addition
7485 4-bit Magnitude Comparator
25,00 EGP- Compares two 4-bit binary numbers (A and B)
- Provides outputs for A > B, A = B, and A < B
- Operates with standard TTL logic levels
- Cascadable for comparing larger bit-width numbers
- Commonly used in digital sorting, arithmetic, and decision circuits
7486 Quad EXCLUSIVE-OR Gate
14,00 EGP- Contains four independent 2-input XOR gates
- Operates on standard TTL logic levels
- Used for parity checking, bitwise addition, and logic functions
- Fast switching speed with low power consumption
- Widely used in digital circuits and signal processing
7490 Decade Counter
25,00 EGP-
4-bit binary decade counter IC
-
Counts from 0 to 9 (decimal) and then resets
-
Supports asynchronous reset and preset inputs
-
Operates at standard TTL logic levels
-
Commonly used in digital clocks, frequency dividers, and counters
74HC595 Shift Register (Serial-In Parallel-Out)
15,00 EGP- 🔁 8-bit shift register: Serial-In / Parallel-Out (SIPO)
- 🧩 Expands I/O pins—control 8 outputs using 3 wires
- ⛓️ Daisy-chainable to add more outputs easily
- ⚡ Fast switching for LEDs, displays, and digital control
- 🧠 Separate shift & storage registers for glitch-free updates
- 🔌 Works great with Arduino, ESP32, STM32, Raspberry Pi
- 💡 Ideal for LED matrices, 7-segment, relays, indicators
- 📦 Common DIP/SMD packages for prototyping or production
ADC0808CCN PDIP-28 Analog to Digital Converter-ADC
Original price was: 150,00 EGP.120,00 EGPCurrent price is: 120,00 EGP.✅ 8-bit ADC with 8 input channels
✅ Parallel 8-bit digital output
✅ Single +5V power supply operation
✅ Fast conversion (~100 µs)
✅ Standard 28-pin PDIP package
CD4001 Quad 2-Input NOR Gate
12,00 EGP- 🧠 CD4001 CMOS IC with 4× 2-input NOR gates
- 🔁 Four independent NOR gates in one chip
- ⚡ Wide operating voltage range for flexible designs
- 🔌 Low power consumption—ideal for battery circuits
- 🧩 Great for digital logic, oscillators, and signal shaping
- 🛠️ Can build NOT/OR/AND functions using NOR logic
- 📦 Common DIP package—easy prototyping and soldering
- ✅ Useful for DIY electronics, control circuits, and repairs
CD4002 Dual 4-Input NOR Gate
15,00 EGP- 🧠 CD4002 CMOS IC with dual 4-input NOR gates
- 🔁 Two independent NOR gates (each 4 inputs)
- ⚡ Wide operating voltage range—CMOS flexible supply
- 🧩 Ideal for digital logic, signal gating, and control circuits
- 🛠️ Useful for building basic logic functions and combinational logic
- 🔌 Low power consumption—great for battery projects
- 📦 Available in DIP/SMD packages for prototyping/production
- ✅ Perfect for logic trainers, DIY electronics, and repairs
CD4012 Dual 4-input NAND Gate
15,00 EGP-
Dual 4-input NAND gates in one IC
-
CMOS technology: low power and high noise margin
-
Wide voltage range: 3V–15V operation
-
Compatible with TTL and CMOS logic
-
Ideal for digital logic, signal control, and general-purpose logic applications
CD4013 Dual D Flip-Flop with Set/Reset
12,00 EGP- Dual edge-triggered D flip-flops with Set and Reset
- Complementary outputs for each flip-flop
- Wide operating voltage and low power consumption
- Ideal for timing, storage, and toggle logic in digital electronics
CD4016 Quad Bilateral Switch
15,00 EGP-
4-channel bilateral switch IC with bidirectional signal capability
-
Works with analog and digital signals
-
Low ON resistance and low leakage
-
Controlled via logic-level signals (HIGH = ON)
-
Perfect for switching, routing, and analog multiplexing
CD4017 Decade Counter/Divider
15,00 EGP-
10-output decade counter with divide-by-10 capability
-
Sequential output activation on each clock pulse
-
Carry-out and reset pins for flexibility in design
-
Ideal for LED sequencing, timing circuits, and DIY electronics
CD4026 Decade Counters/Dividers
25,00 EGP-
0–9 decade counter with built-in 7-segment decoder
-
Drives LED displays directly (common cathode)
-
Carry-out pin allows cascading for multi-digit displays
-
Reset and clock inhibit functions included
-
Ideal for digital counters, timers, and numeric displays
CD4028 BCD-to-Decimal Decoder
15,00 EGP-
Converts BCD (0000–1001) to 1-of-10 active LOW outputs
-
All outputs LOW for invalid inputs (1010–1111)
-
Wide voltage range: 3V to 15V
-
Low power CMOS, TTL compatible
-
Ideal for numeric display control and BCD decoding
CD4053 Triple 2-channel Multiplexer/Demultiplexer
15,00 EGP-
Triple SPDT analog switch/multiplexer
-
Passes both digital and analog signals
-
Low ON resistance and low power CMOS
-
Works from 3V to 18V with TTL/CMOS logic
-
Ideal for audio, signal routing, and I/O selection
CD4070 Quad EXCLUSIVE-OR Gate
20,00 EGP-
CMOS Quad 2-Input Exclusive-OR (XOR) Gate
-
Low power consumption, high noise immunity
-
Works from 3V to 15V
-
TTL-compatible logic levels
-
Ideal for parity checking, logic operations, and digital control
CD4071 Quad 2-Input OR Gate
15,00 EGP- CMOS-based Quad 2-Input OR Gate
- Works from 3V to 15V
- Low power, high noise margin
- TTL logic compatible (at 5V)
- Standard 14-pin IC format
CD4073 Triple 3-input AND Gate
25,00 EGP- CMOS-based triple 3-input AND gate
- Operates from 3V to 15V
- Low power, high noise immunity
- 14-pin DIP or SOIC package
- Suitable for digital logic and timing control
